Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1] 2 3   Go Down

Author Topic: Another 1040 repair  (Read 4151 times)

0 Members and 1 Guest are viewing this topic.

boxcall

  • You got to love it!!!
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1801
Another 1040 repair
« on: October 21, 2020, 09:41:10 PM »

Just bought this junker for fifty it needs love!!! and more importantly the metal keyboard arm part is broken on three treble buttons, can this be fixed or do I need a new assembly? Also one spring on the bass end is snapped. Bellows are a wreck ( maybe repairable? ) , other than that she’s prefect. I know crazy but it is key of G and the reeds look great clean etc. case is good enough with cleaning.
If anyone has something to fit pm me. I’ll look around also , check with CGM etc.
Thanks
Logged
Hohner 1040 C, Beltuna one row four stop D, O'Byrne Dewitt/ Baldoni bros. D/C#, Paolo soprani "pepperpot" one row D

Peadar

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2039
Re: Another 1040 repair
« Reply #1 on: October 21, 2020, 11:43:47 PM »

It is possible to do soft solder repairs to ferrous metals- but you have to get the joint area really clean
Logged

boxcall

  • You got to love it!!!
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1801
Re: Another 1040 repair
« Reply #2 on: October 22, 2020, 12:11:22 AM »

It is possible to do soft solder repairs to ferrous metals- but you have to get the joint area really clean
thank you and yes possible if I had the arm part, sorry I should have been more clear thats gone.
When I opened the grill, to inspect, I had to shake out some rust and those three bits/ arms are missing. Wood pallets were missing as well on those buttons.
I very much expected to see rust on the reeds also but those were ok. (A bit rusty)
And funny that the rest of the keyboard mechanism didn’t appear to rusty, grill is slightly, the corners look pretty good.

Edit to add (a bit rusty)
« Last Edit: October 27, 2020, 02:48:50 PM by boxcall »
Logged
Hohner 1040 C, Beltuna one row four stop D, O'Byrne Dewitt/ Baldoni bros. D/C#, Paolo soprani "pepperpot" one row D

pgroff

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1827
Re: Another 1040 repair
« Reply #3 on: October 22, 2020, 02:51:24 PM »

It is possible to do soft solder repairs to ferrous metals- but you have to get the joint area really clean
thank you and yes possible if I had the arm part, sorry I should have been more clear thats gone.
When I opened the grill, to inspect, I had to shake out some rust and those three bits/ arms are missing. Wood pallets were missing as well on those buttons.
I very much expected to see rust on the reeds also but those were fine.
And funny that the rest of the keyboard mechanism didn’t appear to rusty, grill is slightly, the corners look pretty good.

Michael, I'm assuming that you like the look of this one - or you want the fun of a rebuild project - or you'd have picked up a more modern one in better condition. The parts you need plus the work might well cost more than the cost of a project box that has all the needed parts.

I have an unrestored postwar goldtone 1040 in G all of whose parts are probably compatible, actually in playing condition though unrestored. I think I recently offered it to someone without the grille for $85.  I think I have one of the earlier blond ones too, but in C. Message me if you can't find what you need; probably I can supply  all the parts you need if that helps.

PG

Logged

boxcall

  • You got to love it!!!
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1801
Re: Another 1040 repair
« Reply #4 on: October 25, 2020, 08:45:51 PM »

Thank you paul, that is a good offer and worth considering.

Out of curiosity do any of the fettlers save the just the arms themselves for one or two rows for repair?

You won’t need to forfeit one unles you want two ;) if so I need three!

Do you see broken rocker arms much?

Seems like it would be easy to fix if I had a few button /rocker arms. I would understand if these were being saved for repairers use in business.

The treble assembly came apart easy so if I could get these...... I could save this old thing.

Logged
Hohner 1040 C, Beltuna one row four stop D, O'Byrne Dewitt/ Baldoni bros. D/C#, Paolo soprani "pepperpot" one row D

boxcall

  • You got to love it!!!
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1801
Re: Another 1040 repair
« Reply #5 on: October 27, 2020, 03:11:12 PM »

After a little clean up on the case and finger board , I may do a little more in spots.
It was pretty grungy.

Good news, I have found the part I was looking for , hurray !
And hurray for this forum and its leaders!!


I pulled all the reeds and removed the valves, they came out and cleaned off easy the wax was pretty dried out. The reeds do need some cleaning as to rust upon closer inspection, not to bad though.

Next problem will be the bellows , they don’t appear to be to bad for leaks , I noticed one small hole in the leather diamond repairable I think. The side shown is the best side the rest of the tape and paper needs work.
Logged
Hohner 1040 C, Beltuna one row four stop D, O'Byrne Dewitt/ Baldoni bros. D/C#, Paolo soprani "pepperpot" one row D

boxcall

  • You got to love it!!!
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1801
Re: Another 1040 repair
« Reply #6 on: October 29, 2020, 01:38:12 PM »

So while waiting for some repair parts to arrive I went ahead and started working on the bellows.
Here’s a photo of the bellows from the backside and a couple of shots of the bellows striped down.
The front tape came off easy almost full strips the other three sides had masking tape covering areas of the background paper that had come off (I guess). All sides of the background paper are crack or chipped, mostly right down the middle of the fold. While removing the tape one corner came right off and a couple more corners after removing the tape showed a few cracks in the card fold near the metal corner.
I have some work to do on these, are they worth salvaging? I don’t mind putting some work in to it.
Gussets don’t look to bad just grimy like the rest of it.
Logged
Hohner 1040 C, Beltuna one row four stop D, O'Byrne Dewitt/ Baldoni bros. D/C#, Paolo soprani "pepperpot" one row D

Gonk

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 507
  • (Mudlark Music)
    • Mudlark Music
Re: Another 1040 repair
« Reply #7 on: October 29, 2020, 01:45:48 PM »

Are you thinking of repapering them as well as retaping?  It could be quite an upgrade, looks-wise.

I've retaped one so far.  It was tedious business, but came out looking great.  I have more time than money (I hope) so it makes sense to me to go for it.  Especially if part of the goal is to learn.
Logged
Mudlark Music - restoration, repairs, lessons, and sales.  (USA)  http://mudlark-music.com

boxcall

  • You got to love it!!!
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1801
Re: Another 1040 repair
« Reply #8 on: October 29, 2020, 01:50:54 PM »

A couple more pics.


Are you thinking of repapering them as well as retaping?  It could be quite an upgrade, looks-wise.

I've retaped one so far.  It was tedious business, but came out looking great.  I have more time than money (I hope) so it makes sense to me to go for it.  Especially if part of the goal is to learn.
Learning would be part of it, picking off the tape was as much fun as Lester promised. ;)
What did you use for repapering the background?
Should one be able to go right over the old if it is stuck on still?
« Last Edit: October 29, 2020, 01:56:27 PM by boxcall »
Logged
Hohner 1040 C, Beltuna one row four stop D, O'Byrne Dewitt/ Baldoni bros. D/C#, Paolo soprani "pepperpot" one row D

Gonk

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 507
  • (Mudlark Music)
    • Mudlark Music
Re: Another 1040 repair
« Reply #9 on: October 29, 2020, 01:54:13 PM »

I don't suppose you have a matching corner lying around?
Logged
Mudlark Music - restoration, repairs, lessons, and sales.  (USA)  http://mudlark-music.com

boxcall

  • You got to love it!!!
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1801
Re: Another 1040 repair
« Reply #10 on: October 29, 2020, 01:58:31 PM »

I don't suppose you have a matching corner lying around?
I have the one that’s not shown
Logged
Hohner 1040 C, Beltuna one row four stop D, O'Byrne Dewitt/ Baldoni bros. D/C#, Paolo soprani "pepperpot" one row D

Pete Dunk

  • Typo Expert
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3706
Re: Another 1040 repair
« Reply #11 on: October 29, 2020, 02:18:06 PM »

I repapered and retaped a shoddy set of bellows on a 1040 a few months ago. I used good quality striped Italian tape for the fold edges but repapered the valleys with good quality, relatively inexpensive (compared to bookbinder's papers) gift wrapping paper. I papered straight over the old papers with no problems using starch based (not cellulose) wallpaper paste, the bellows tape was applied using woodworker's PVA glue, it was a bit slow to grab but worked fine in the end. See the thread here for pics.
Logged
Squeezing on the Isle of Oxney, UK
Primo (Serenellini) D/G
Isis D/G
Hohner B/E, G/C, C/F, Bb/Eb G/C/F
Liliputs D/G (G scale), C/F, Bb/Eb, Albrecht Custom D/G (G scale)

boxcall

  • You got to love it!!!
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1801
Re: Another 1040 repair
« Reply #12 on: October 29, 2020, 02:39:10 PM »

I repapered and retaped a shoddy set of bellows on a 1040 a few months ago. I used good quality striped Italian tape for the fold edges but repapered the valleys with good quality, relatively inexpensive (compared to bookbinder's papers) gift wrapping paper. I papered straight over the old papers with no problems using starch based (not cellulose) wallpaper paste, the bellows tape was applied using woodworker's PVA glue, it was a bit slow to grab but worked fine in the end. See the thread here for pics.
.
Hi Pete , thanks for that link and encouragement  (:)
I saw some of your project before, I probably just looked at the pictures, it came out good!  I”ll go back and read through it properly now.

I think, its cereal box card for fixing the bellows where they are cracked?
I’d guess from the inside, but then the corner of the new piece of card wouldn’t go into the metal or be on the same plane as the rest of it. If that makes any sense or even matters?
Logged
Hohner 1040 C, Beltuna one row four stop D, O'Byrne Dewitt/ Baldoni bros. D/C#, Paolo soprani "pepperpot" one row D

Gonk

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 507
  • (Mudlark Music)
    • Mudlark Music
Re: Another 1040 repair
« Reply #13 on: October 29, 2020, 03:05:29 PM »

I'd be worried about it closing unevenly, if too much layering went on.  I would probably mix a little pva and tissue paper to a tacky cellulose paste and fill the hole from the outside, then glue a piece of paper across the mend to help bind it to the rest of the cardboard at an even level.

I'm also musing about your 'cereal box' comment.  I'm wondering whether, in the long run, you're better off with acid-free cardboard.  I would feel most comfortable using bristol board or even cotton watercolor paper, intended for art, as it wouldn't be likely to leach acids and corrode the surrounding paper.  But I don't know if even the original cardboard was pH neutral.
Logged
Mudlark Music - restoration, repairs, lessons, and sales.  (USA)  http://mudlark-music.com

Pete Dunk

  • Typo Expert
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3706
Re: Another 1040 repair
« Reply #14 on: October 29, 2020, 03:08:50 PM »

I've never had to remove or replace a metal corner or repair damaged card in this area, so I don't know what to recommend. I used to be able to get hold of an incrediblty thin pneumatic leather called zephyr, sold by a concertina repair specialist, but it disappeared from the website some years ago when the business changed hands and the new owner no longer stocked it. That might have worked into the inside of the card corner without bulking it out too much to get the corner back on. It may still be available via a specialist organ repairer but I've not been able to find any anywhere. Perhaps one of the experienced pro repairers on here will have a suggestion, but there comes a time when a new set of bellows are the sensible option both from a practical and a financial viewpoint. Good luck with it!
Logged
Squeezing on the Isle of Oxney, UK
Primo (Serenellini) D/G
Isis D/G
Hohner B/E, G/C, C/F, Bb/Eb G/C/F
Liliputs D/G (G scale), C/F, Bb/Eb, Albrecht Custom D/G (G scale)

Winston Smith

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4066
  • AKA Edward Jennings
    • "Our Luxor B&B" Luxor life, slice by slice.
Re: Another 1040 repair
« Reply #15 on: October 29, 2020, 03:14:18 PM »

"But I don't know if even the original cardboard was pH neutral."

Do you think that the original manufacturers had any idea, either?
I only stop using cereal boxes when the bellows clasps stop meeting in the middle, and they have served heroically! (Mind you, I'm well regarded in the worlds of butchery and bodgery!)
Logged
At last, broken and resigned to accept conformity.
Oh, how I LOVE Big Brother!

Gonk

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 507
  • (Mudlark Music)
    • Mudlark Music
Re: Another 1040 repair
« Reply #16 on: October 29, 2020, 03:18:01 PM »

Winston, good to know it works!

When the bellows clasps stop meeting in the middle, meaning, your bellows have beefed out substantially?
Logged
Mudlark Music - restoration, repairs, lessons, and sales.  (USA)  http://mudlark-music.com

Winston Smith

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4066
  • AKA Edward Jennings
    • "Our Luxor B&B" Luxor life, slice by slice.
Re: Another 1040 repair
« Reply #17 on: October 29, 2020, 03:32:02 PM »

Well.....yes, but that's not till there's nearly as much cereal box as there is original bellows; by which time it doesn't really matter about the Ph, or anything else, come to that, as they're due for the bin!
Logged
At last, broken and resigned to accept conformity.
Oh, how I LOVE Big Brother!

Peadar

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2039
Re: Another 1040 repair
« Reply #18 on: October 29, 2020, 03:32:53 PM »


I think, its cereal box card for fixing the bellows where they are cracked?
I’d guess from the inside, but then the corner of the new piece of card wouldn’t go into the metal or be on the same plane as the rest of it. If that makes any sense or even matters?

How would it matter? It's only the hinge (of the fold) that needs a patch over it.
Old fashioned banknotes were made of ragpaper. Cut into inch wide strips they could make a very effective and flexible repair. (Wait for Winston's response on this idea! 10...9....8....)
Logged

Winston Smith

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4066
  • AKA Edward Jennings
    • "Our Luxor B&B" Luxor life, slice by slice.
Re: Another 1040 repair
« Reply #19 on: October 29, 2020, 03:37:41 PM »

Now then, that boy!
If my middle initial was P instead of J, I could tell folk that it stood for Parsimonious. In fact, where's that Deed Poll form?
Logged
At last, broken and resigned to accept conformity.
Oh, how I LOVE Big Brother!
Pages: [1] 2 3   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal