Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: 1 2 [3]   Go Down

Author Topic: Another 1040 repair  (Read 4130 times)

0 Members and 1 Guest are viewing this topic.

Winston Smith

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4066
  • AKA Edward Jennings
    • "Our Luxor B&B" Luxor life, slice by slice.
Re: Another 1040 repair
« Reply #40 on: December 11, 2020, 07:51:12 PM »

Never boring, boxcall. This section is my "go to" Internet page, I love it!
Logged
At last, broken and resigned to accept conformity.
Oh, how I LOVE Big Brother!

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: Another 1040 repair
« Reply #41 on: December 12, 2020, 08:41:37 AM »

I ended up pulling the reeds out one at a time to tune, one bank to pitch and the other side to what I think is a Hohner tuning  ;)  I tuned them in the box holding the treble end as tight as possible while applying bellow pressure to tune, but when I reassembled the box it went up a cent or two?

A cent or two isn't much and generally less than most people's threshold of pitch perception. However, if you want to adjust the pitch, you are in a good position with the reeds being slightly sharp. It should be easy enough to flatten the reeds (both push and pull) in situ, using a reed scratcher very gently and carefully. Just try not to over do it and end up with flat reeds!  :o

If you are not already doing so, make a note of how much each reed is flat or sharp with the box fully assembled. That will give you a guide to how much scratching to do. You will need to temporarily block off the tremolo reeds with reduced tackiness masking tape or paper strips.

Once you have the at-pitch reeds tuned, I would then recommend fine tuning the tremolo reeds simply by listening to the tremolo rate and adjusting as necessary so tht the tremolo becomes an even progression along the range from low to high, or an even tremolo rate across the range - it's a personal choice.

Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

boxcall

  • You got to love it!!!
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1801
Re: Another 1040 repair
« Reply #42 on: December 12, 2020, 02:34:32 PM »

Never boring, boxcall. This section is my "go to" Internet page, I love it!
Trouble with a job done or almost is soon you will need another  ;)
I’m really liking the sound of this G box compared to my C box.


@ Steve , thanks as always! ok I won’t worry about it for now and maybe go back to it after playing it a bit, exercise them a bit first (:) I think the tremolo is pretty good, probably a couple of tweaks but that can wait. I went with a tremolo chart that I pinched from Lester’s video, sorry, not 😐.

Having said that (and hopefully its ok) I appreciate all your videos Lester they have been a big help.
Mine, It’s not really Hotrod more Ratrod :D
Logged
Hohner 1040 C, Beltuna one row four stop D, O'Byrne Dewitt/ Baldoni bros. D/C#, Paolo soprani "pepperpot" one row D
Pages: 1 2 [3]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal