Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1] 2   Go Down

Author Topic: Chord Reed Plate Order  (Read 2645 times)

0 Members and 1 Guest are viewing this topic.

Pat McInnis

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 390
Chord Reed Plate Order
« on: October 27, 2020, 02:40:05 AM »

I recently picked up a pre-Pokerwork project in BE that I'm switching to BC and wondering what the order will be for left side chord plates to be correct for BC? all of the plates were lying in a heap when I picked this up so I wouldn't know what order would be correct for BE either. I'm aware that I won't have all the pieces from BE to go BC but I have a few other wrecks that can donate to the cause and I can sound the plates on my tuning bellows to figure out what they are. Any help on this is much appreciated.

Pat
Logged

tirpous

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1403
Re: Chord Reed Plate Order
« Reply #1 on: October 27, 2020, 03:35:05 AM »

There are many bass layouts used for BC, do you have a specific one in mind ?

https://hspeek.home.xs4all.nl/irishbox/basses.html
Logged

Pat McInnis

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 390
Re: Chord Reed Plate Order
« Reply #2 on: October 27, 2020, 04:17:41 AM »

There are many bass layouts used for BC, do you have a specific one in mind ?

https://hspeek.home.xs4all.nl/irishbox/basses.html

 I really don't at this point. I thought this might come up. The box is for my friend, so I guess I could see what he plays. I mostly want to know what combination of keys will make what chords so that I can even see if I have all the right reed sets
Logged

pgroff

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1827
Re: Chord Reed Plate Order
« Reply #3 on: October 27, 2020, 09:37:11 AM »

Not exactly sure what you're asking, but a typical Hohner 8 bass layout for a BE box would include bass reeds for B/F#, E/B, A/A, and D#/G#  (all shown as press/draw), and the triads  (chords)  B major/ F# major,  Emajor / Bmajor, A major/A major, and D# major / G# minor.

Here are the notes that make up those triads:

B major:  B, D#, F#
E major: E, G#, B
A major: A, C#, E
D# major: D#, G, A#
G# minor: G#, B, D#


As tirpous wrote above, there are many layouts in use for BC boxes.

PG
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Chord Reed Plate Order
« Reply #4 on: October 27, 2020, 10:00:55 AM »

Here is a list of bass layouts for semitone boxes including all the common BC bass systems.
http://squeezehead.com/keyboard-layouts/basses/LAYOUTS.html

Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Pearse Rossa

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 723
Re: Chord Reed Plate Order
« Reply #5 on: October 27, 2020, 02:40:21 PM »

I mostly want to know what combination of keys will make what chords so that I can even see if I have all the right reed sets

OK, this is one example of several options;
Joe Burke's B/C
(top of instrument)
   outside   inside
chord    D/D    E/A
bass    D/D    E/A
chord    G/G    C/F
bass    G/G    C/F

Then the notes you need to make up the major chords will be as follows;
D: D, F#, A
G: G, B, D
E: E, G#, B
A: A, C#, E
C: C, E, G
F: F, A, C

So, for your E/A chord you will need these reeds; E/A, G#/C#, B/E.
And so on..
You might have to raid a PA for the D/D and G/G chords.
If you want a neutral (3rd less) chord, leave out the middle note.
You have other options you can experiment with, such as double fifths.
If you have a keyboard available, you can play these and other combinations to see how you like the sound of them. I find that useful.
Personally, I prefer the traditional Paolo Soprani bass layout. We can go through that if you want.
Logged

tirpous

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1403
Re: Chord Reed Plate Order
« Reply #6 on: October 27, 2020, 03:04:40 PM »

Quote
Here is a list of bass layouts for semitone boxes including all the common BC bass systems.
http://squeezehead.com/keyboard-layouts/basses/LAYOUTS.html

Ah sorry, I had failed to clarify what the link ( https://hspeek.home.xs4all.nl/irishbox/basses.html) in my earlier reply was for.  Turns out it's the very same information.

Quote
So, for your E/A chord you will need these reeds; E/A, G#/C#, B/E.
And so on..

Note that in practice the reeds are often paired with the nearest note from the 'other' chord: E/E, G#/A, B/C#.  The exact pairing does not really matter as long as you have the right notes.  And it's not too difficult to retune a reed up or down a semi-tone if you have a close-but-not-quite-right reed plate. 
Logged

Pat McInnis

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 390
Re: Chord Reed Plate Order
« Reply #7 on: October 27, 2020, 03:06:04 PM »

I mostly want to know what combination of keys will make what chords so that I can even see if I have all the right reed sets

OK, this is one example of several options;
Joe Burke's B/C
(top of instrument)
   outside   inside
chord    D/D    E/A
bass    D/D    E/A
chord    G/G    C/F
bass    G/G    C/F

Then the notes you need to make up the major chords will be as follows;
D: D, F#, A
G: G, B, D
E: E, G#, B
A: A, C#, E
C: C, E, G
F: F, A, C

So, for your E/A chord you will need these reeds; E/A, G#/C#, B/E.
And so on..
You might have to raid a PA for the D/D and G/G chords.
If you want a neutral (3rd less) chord, leave out the middle note.
You have other options you can experiment with, such as double fifths.
If you have a keyboard available, you can play these and other combinations to see how you like the sound of them. I find that useful.
Personally, I prefer the traditional Paolo Soprani bass layout. We can go through that if you want.


Yes!! You and Mr Groff hit it. I felt like I was doing a poor job of describing what I want to do, so I'm glad you guys deciphered my code. I'll make a decision on the BC layout that will be used but I want to start the process of laying out the materials that I have and had no idea what three notes would make what chords. This should keep me busy for a while. I also just got a free PA that I can pilfer parts from if need be.

Thanks
Logged

Pearse Rossa

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 723
Re: Chord Reed Plate Order
« Reply #8 on: October 27, 2020, 03:15:31 PM »

...no idea what three notes would make what chords.

I find this site very useful.
Logged

Pearse Rossa

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 723
Re: Chord Reed Plate Order
« Reply #9 on: October 27, 2020, 04:07:44 PM »

Note that in practice the reeds are often paired with the nearest note from the 'other' chord: E/E, G#/A, B/C#.  The exact pairing does not really matter as long as you have the right notes.  And it's not too difficult to retune a reed up or down a semi-tone if you have a close-but-not-quite-right reed plate.

True. And worth pointing out.
Logged

Pat McInnis

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 390
Re: Chord Reed Plate Order
« Reply #10 on: October 29, 2020, 11:11:08 PM »

IMG_0827 by Pat McInnis, on Flickr

Alright, I think I may be in over my head. Keep in mind that none of these reed plates are labeled or in any sort of order and most are missing valves. Trying to hold them in place on the block without wax and trying to decipher what notes are pushing and pulling seems really inaccurate for obvious reasons.
The chord side of things is slowly taking shape and given what I have to choose from I should be able to flip a few plates and tune the remaining ones up or down.
I hadn't even thought about the bass side until today. Only two reeds to work with on this one. Are they meant to be tuned to each other? Sorry if these are dumb questions. Just trying to make sense of it all.
Logged

Pearse Rossa

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 723
Re: Chord Reed Plate Order
« Reply #11 on: October 29, 2020, 11:20:42 PM »

Trying to hold them in place on the block without wax and trying to decipher what notes are pushing and pulling seems really inaccurate for obvious reasons.

Hold the reed in your hand and ping the tongue. Find the note it makes, on a box or keyboard or whistle or whatever.
Logged

Pat McInnis

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 390
Re: Chord Reed Plate Order
« Reply #12 on: October 29, 2020, 11:49:40 PM »

Trying to hold them in place on the block without wax and trying to decipher what notes are pushing and pulling seems really inaccurate for obvious reasons.

Hold the reed in your hand and ping the tongue. Find the note it makes, on a box or keyboard or whistle or whatever.

Funny, I hadn't thought of pinging the tongue like a tuning fork. I guess I could just ping it to my tuner.
Logged

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: Chord Reed Plate Order
« Reply #13 on: October 30, 2020, 12:06:21 AM »

Trying to hold them in place on the block without wax and trying to decipher what notes are pushing and pulling seems really inaccurate for obvious reasons.

Hold the reed in your hand and ping the tongue. Find the note it makes, on a box or keyboard or whistle or whatever.

Funny, I hadn't thought of pinging the tongue like a tuning fork. I guess I could just ping it to my tuner.
Press the reed plate down on a hard surface, e.g. a table top, with the reed tongue slightly overhanging the edge. The 'ping' will sound louder and for longer, allowing you or your tuner a better chance of hearing the note.
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

Pearse Rossa

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 723
Re: Chord Reed Plate Order
« Reply #14 on: October 30, 2020, 12:30:04 AM »

I guess I could just ping it to my tuner.

You could, but it doesn't always work all that well. It's difficult to get a good loud sustained note.
I would sooner trust my ears. Works for me in any event.
Logged

Winston Smith

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4066
  • AKA Edward Jennings
    • "Our Luxor B&B" Luxor life, slice by slice.
Re: Chord Reed Plate Order
« Reply #15 on: October 30, 2020, 08:31:39 AM »

"IMG_0827 by Pat McInnis, on Flickr"

Nice to see a tidy work space there, Pat.

"Press the reed plate down on a hard surface, e.g. a table top, with the reed tongue slightly overhanging the edge. The 'ping' will sound louder and for longer, allowing you or your tuner a better chance of hearing the note."

Why hadn't I thought of that in all this time? Thanks Steve, that's a great tip.
Logged
At last, broken and resigned to accept conformity.
Oh, how I LOVE Big Brother!

Pat McInnis

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 390
Re: Chord Reed Plate Order
« Reply #16 on: October 30, 2020, 03:33:07 PM »

"IMG_0827 by Pat McInnis, on Flickr"

Nice to see a tidy work space there, Pat.

"Press the reed plate down on a hard surface, e.g. a table top, with the reed tongue slightly overhanging the edge. The 'ping' will sound louder and for longer, allowing you or your tuner a better chance of hearing the note."

Why hadn't I thought of that in all this time? Thanks Steve, that's a great tip.

This mess was a result of three frustrating hours. Thanks for salting my wound.haha

Yes, the pinging trick seems like a good one.

Still no takers on which two bass reeds go together. D with D? A with A?
Logged

Gonk

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 507
  • (Mudlark Music)
    • Mudlark Music
Re: Chord Reed Plate Order
« Reply #17 on: October 30, 2020, 04:03:11 PM »

Still no takers on which two bass reeds go together. D with D? A with A?

If you mean bass as opposed to chord, yes, octaves.  If you mean chords on the bass side, fifths and thirds.
Logged
Mudlark Music - restoration, repairs, lessons, and sales.  (USA)  http://mudlark-music.com

Pat McInnis

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 390
Re: Chord Reed Plate Order
« Reply #18 on: October 30, 2020, 04:12:03 PM »

Still no takers on which two bass reeds go together. D with D? A with A?

If you mean bass as opposed to chord, yes, octaves.  If you mean chords on the bass side, fifths and thirds.

Ah, interesting. Music theory isn't in my wheelhouse. The chord combinations are coming together thanks to the above comments but this is the first that I've heard it described as fifths and thirds. Not that that term helps my feeble mind. Octaves of the same note for the two basses. Now I can get to work I think.
Logged

Gonk

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 507
  • (Mudlark Music)
    • Mudlark Music
Re: Chord Reed Plate Order
« Reply #19 on: October 30, 2020, 04:48:01 PM »

Ok!  If it helps, here's a quick illustration.  I understand that you have the chords sorted, but perhaps this will be of interest anyway.

|   1   |   2   |   3   |   4   |   5   |   6   |   7   |   8   |   9   |  10   |  11   |  12   |
|   A   | A#/Bb |   B   |   C   | C#/Db |   D   | D#/Eb |   E   |   F   | F#/Gb |   G   | G#/Ab |

12 tones, each a semitone apart.  If you take two notes and find the difference of their numerical values, you can find the interval:

1 - semitone or half-step
2 - full step or second
3 - minor third
4 - major third
5 - fourth
6 - tritone
7 - fifth

Chord triads are a root, followed by a third, and a fifth (in relation to that root).  If the third is a minor third, then the chord is minor, and if it's major, the chord is major.  So if you are starting with a bass with a root of A, and you want an A major chord to go with it, start at 1 (A).  add 4 to to arrive at 5 (C#/Db), and add 7 to arrive at 8 (E).  The A major chord is A-C#-E.

To handle numbers below 1 or above 12, imagine a clock.  (A wheel would be a much better layout for this chart.)
Logged
Mudlark Music - restoration, repairs, lessons, and sales.  (USA)  http://mudlark-music.com
Pages: [1] 2   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal