Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Old Czechoslovakian melodion.  (Read 956 times)

0 Members and 1 Guest are viewing this topic.

RPr

  • Member
  • *
  • Offline Offline
  • Posts: 28
Old Czechoslovakian melodion.
« on: October 27, 2020, 07:58:52 PM »

I have an old Czechoslovakian melodeon that has sat on the shelf of over 25 years. I traded a banjo for it (no puns necessary) and have tinkered with it over the years.

It has,
A red stained wood finish with "Make in Czeckslovakia" stamped on it.
The grill is wooden with a cloth backing.
It has 10 buttons and 4 base button.

Now here is the strange part. My chromatic tuner shows,
* It is a G# scale with each note 35 to 45 cents sharp. (Or maybe A flat)
* The first octave has air leaks, so both the push and pull notes sound. The second octave notes sound fine.
* The reed bank is one solid piece like you would find in a harmonica. And the third octave G# approaches the ultrasonic. Unfortunately my tuner does not give the octave but it is a very frequency.
* The bass side buttons are #1 G# cord and D# cord, #2 is G# and D#, #3 is F cord, and an unknown minor cord, #4 F and B. (The F shows 0 cents of offset.)

My first idea is the replace the leather valves to see if it will play in tune to itself. But of possible, I would like to find a replacement reed set in. 
   
This is obviously a labor of love, because I hate to see an old instrument not working with out giving it a chance. That is why I have not thrown it out over the last quarter century. Besides it does not eat much. :)

Any information would be helpful.
Logged

Peadar

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2039
Re: Old Czechoslovakian melodion.
« Reply #1 on: October 27, 2020, 10:22:14 PM »

Your tuner will be set to modern concert pitch A=440, But some older boxes were tuned to "Old Philharmonic High Pitch" which I think is around A=455 and others to lower pitches - down to about A=430.
If your tuner is one that can have it's reference pitch adjusted try winding it up and down the way. I think that at somewhere in the pitch range A=430 to A=455 you will find a point at which your melodion shows itself to have been tuned to either G or A, rather than G#.
Long reed plates as you describe were very common in pre-1914 boxes and remained common in cheaper boxes through to the 1930's.

 
Logged

folkloristmark

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 582
    • street entertainers
Re: Old Czechoslovakian melodion.
« Reply #2 on: October 28, 2020, 10:00:05 AM »

Once found g or a from you description dont assume the old reeds are shot. They may be very nice if vintage. Are they on individual plates waxed or on leathers. Can the block be removed for access to the underside reeds.Given its age you need a full going over and 1. cleaning 2 revalving 3 rewaxing is far easier to in one job.

As to retuning that  is a mater fro you and is by far the hardest and riskiest. I at the moment  I have restored a couple of hohner attempting to keep the old tuning and valves as far as possible as they sound just great  as vintage I have a cupboard full of ones up to 440. Sometimes its a shame to change the character.I might be becoming a melodeon luvie. Anyway good luck.
Logged
Mark Taylor
Folkloristmark

Graham Spencer

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3548
  • MAD as a wet Hohner........
Re: Old Czechoslovakian melodion.
« Reply #3 on: October 28, 2020, 11:46:29 AM »

Always a difficult choice with nice old boxes. I have a gorgeous old Hlavaček heligonka which is a dream to play and sounds wonderful. The snag is it's in old tuning and sits somewhere between E and F. I've thought long and hard about bringing it into modern concert pitch, but in the end I decided to leave it where it is because it just sounds so right. OK, I can only play it solo or with string players who can easily retune to match the box, but I just can't bring myself to "modernise" it.

Graham
Logged
Among others, Saltarelle Pastourelle II D/G; Hohner 4-stop 1-rows in C & G; assorted Hohners; 3-voice German (?) G/C of uncertain parentage; lovely little Hlavacek 1-row Heligonka; Bâ™­/Eâ™­ Koch. Newly acquired G/C Hohner Viktoria. Also Fender Jazz bass, Telecaster, Stratocaster, Epiphone Sheraton, Charvel-Jackson 00-style acoustic guitar, Danelectro 12-string and other stuff..........

Squeezing in the Cyprus sunshine

RPr

  • Member
  • *
  • Offline Offline
  • Posts: 28
Re: Old Czechoslovakian melodion.
« Reply #4 on: October 28, 2020, 03:12:55 PM »

I have a soft spot for old, turn of the last century devices and my first thought is to repair not modify. In reality getting it to play "like new" or nearly so, will be easier then any modifications.

Changing the pitch may follow, i but I think it is better to walk before running. Plus there is a good feeling that comes from knowing you have restored the efforts of some long gone craftsmen.

Fortunately, a few years back I found a very nice, well cared for D/A box.

Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Old Czechoslovakian melodion.
« Reply #5 on: October 28, 2020, 04:53:27 PM »

Nice to hear that you are thinking of restoring it to as near original as you can.  I will add one word of caution.  Old valves are really not worth trying to re-use.  Just use new leather valves. 
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

folkloristmark

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 582
    • street entertainers
Re: Old Czechoslovakian melodion.
« Reply #6 on: October 28, 2020, 07:28:37 PM »

Good you can always retune latter.

"I will add one word of caution.  Old valves are really not worth trying to re-use.  Just use new leather valves."

I would agree with Theo whole hearledley. Occassionally it is worth keeping old valves if trying to keep an existing sound.However they are usually  most certainly knackared. With the box I referenced to I kept the most of valves as they were useable and I suspect not as old as the box as it was fettled at some point.It is good to learn how to restore valves , and understand how they effect both tuning and attack,I think a valid useful skill but it is not that expensive to make new valves and usually I wouldnt bother.Its good to try to run before you walk and good luck. If you were willing to get a new reed set then you cant go wrong by trying all the alternatves first.
Logged
Mark Taylor
Folkloristmark

Peadar

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2039
Re: Old Czechoslovakian melodion.
« Reply #7 on: October 28, 2020, 07:47:50 PM »

If you restore the box keeping original pitch you have an example of a historical instrument if you seriously re-tune it you don't.

Logged
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal