Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: 1 [2] 3   Go Down

Author Topic: When do you use your low voice?  (Read 4254 times)

0 Members and 1 Guest are viewing this topic.

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: When do you use your low voice?
« Reply #20 on: October 29, 2020, 01:02:37 AM »

My workhorse box is a D/G Saltarelle Nuage (23 buttons, standard layout, low notes and accidentals, LLM)...

...The M(M) voicing is definitely better used on the chin-end. The L voice slows things down, and can sound a bit dull down there. 
Maybe your L reeds could benefit from having the set-up reed tip gap checked?
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: When do you use your low voice?
« Reply #21 on: October 29, 2020, 01:24:07 AM »

Apologies for all these consecutive posts, but just to point out that I make regular use of the stops/switches to engage or mute the L voice as desired, which gives me great flexibility in the type or timbre of sound. The grille switches on instruments such as the (new) Hascy, 1914 and Trilly make it easy to do this on the fly while playing; similarly with the switches behind the keyboard on instruments such as the Mory or Handry.

Saltarelle piston-type stops usually engage the L voice in the 'push down' position which usually enables a swift hand movement to bring in the L voice. Not quite so convenient to pull the stop back up again in mid-play though.  ::)

So if thinking of a prospective purchase of a LMM box, it's worth considering the ease or otherwise of changing the voicing while playing.   
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

smiley

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1021
  • Folk music: it's not as bad as it sounds
    • a few sound clips
Re: When do you use your low voice?
« Reply #22 on: October 29, 2020, 09:58:07 AM »

I have a three voice D/G with a stop on the low reed.  It’s a Tommy.  I mostly play it with the bass reed switched out.  I bring the bass reed in if there is a wild raucous bunch of dancers/spectators and I want the music to be heard over the hubbub. 

I don't understand what's going on with my Tommy , but when I engage the low voice in a session I feel like the box's sound becomes more mellow and it loses the the distinctive clear tone of the two voices. I quite like the LMM sound for slower tunes but the apparent loss of clarity doesn't suit quicker tunes. Maybe I should look at getting the low voice retuned.
Logged

Tufty

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 855
  • Dino Bincis etc
Re: When do you use your low voice?
« Reply #23 on: October 29, 2020, 10:57:07 AM »

You may be right. Here is my Tommy with all reeds going playing some Irish polkas, to my ear it sounds pretty clear. By comparison the two voice sound seems a bit thin.
https://soundcloud.com/tuftyabc/britches-full-of-stitches-breeches-buttoned-on-rakes-of-merlotwav
Logged

Thrupenny Bit

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 7232
  • happily squeezing away in Devon
Re: When do you use your low voice?
« Reply #24 on: October 29, 2020, 11:08:12 AM »

There is something different about a 3 voice box just using it's 2 voices and just a 2 voice one. Not better or worse one way or the other, just... different.
By that I mean a melodeon that only has 2 voices, and one that can bring in a 3rd low voice if required.
I have heard it described that a 2 voice box is more 'focused' in sound.

I wasn't sure what the term meant until I bought a 2 voice Castagnari Jilly from Pete at Acorn.
It sounds different than my Castaganari Hascy when just using the 2 voice option ( but can have the 3rd voice low reed brought in if required ).

Difficult to describe in words, but noticeable when playing.
Another thing to think about!
Q

« Last Edit: October 29, 2020, 11:16:48 AM by Thrupenny Bit »
Logged
Thrupenny Bit

I think I'm starting to get most of the notes in roughly the right order...... sometimes!

Julian S

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1628
  • D/G Pastourelle 2, Dony, Pokerwork, G/C Pariselle
Re: When do you use your low voice?
« Reply #25 on: October 29, 2020, 01:43:40 PM »

Surely mustn't it partly depend on how the two M voices are tuned ? And I'm sure the larger case and the extra reed bank on a three voice would influence the overall sound.

I used to use a Dino Baffetti Binci 3v for Morris playing - and I have to say that the low voice made all the difference when playing outdoors - the M voices did sound a bit thin - maybe needed more tremolo. When we did our pub session at lunchtime, 'entertaining' museum visitors, I often took out the low voice - some tunes just sounded better that way - possibly shoving in low voice on the second tune of a set, to add variety. And I did find that keeping up with the fiddler was easier without the extra voice !

Julian
Logged
Old Bones Dance Band

Thrupenny Bit

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 7232
  • happily squeezing away in Devon
Re: When do you use your low voice?
« Reply #26 on: October 29, 2020, 01:55:08 PM »

My two boxes, Hascy and Jilly share the same sized cases, and are tuned the same 'Castagnari' set up as far as I'm aware.
Though as I type I wonder, maybe there is a difference between MM tuned for itself in a 2v box as opposed to MM tuned to accommodate an LMM setting in a 3v box?
Perhaps someone who tunes can comment on setting up MM on a 2/3voice box.....
Logged
Thrupenny Bit

I think I'm starting to get most of the notes in roughly the right order...... sometimes!

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: When do you use your low voice?
« Reply #27 on: October 29, 2020, 03:40:02 PM »

My two boxes, Hascy and Jilly share the same sized cases, and are tuned the same 'Castagnari' set up as far as I'm aware.
Though as I type I wonder, maybe there is a difference between MM tuned for itself in a 2v box as opposed to MM tuned to accommodate an LMM setting in a 3v box?
Perhaps someone who tunes can comment on setting up MM on a 2/3voice box.....

Choosing MM on a 3-voice LMM box is always going to sound slightly 'different' from MM on a purely two-voice box of the same dimensions, simply because there are only two reed blocks in the latter as opposed to three reed blocks in the former. The internal sound absorption and reflection characteristics of the instruments will be different.

The MM sound is not better nor worse on the two instruments compared, just different. I think the differences will be more obvious to the player than to a listener a few feet away.
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

-Y-

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 896
  • Handry 18 (G/C), Mélodie (D), Club IIb (A/D)
    • a database of nearly 500 melodeons here
Re: When do you use your low voice?
« Reply #28 on: October 29, 2020, 04:03:42 PM »

The maker I'm working with for my next box is also saying that he prefers boxes with as little registers and register mechanisms as possible, he has the impression that too much mechnisms (register plates and so on) alter the sound diffusion. (that being said, I couldn't have a box where you cannot have the L voice alone, and don't really mind, or for that matter often hear the difference).

Thrupenny Bit

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 7232
  • happily squeezing away in Devon
Re: When do you use your low voice?
« Reply #29 on: October 29, 2020, 04:06:53 PM »

Yes, it makes sense that the more gubbins ( technical
term  (:) ) inside then more likely to have  frequencies absorbed and so alter the sound.
I noted on Bertrand Gaillard's website whilst absent minded browsing some days back, he likes to 'let his reeds breath...' and has slightly larger case sizes of some instruments.
I'm sure it partly accounts for the mellow sound of some things such as Mory, Handy etc. as Steve and I have chatted about.
Q

....looks like -Y- has replied along similar lines as I type.
Logged
Thrupenny Bit

I think I'm starting to get most of the notes in roughly the right order...... sometimes!

-Y-

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 896
  • Handry 18 (G/C), Mélodie (D), Club IIb (A/D)
    • a database of nearly 500 melodeons here
Re: When do you use your low voice?
« Reply #30 on: October 29, 2020, 04:13:11 PM »

Also, Bertrand has optimised his production: apart from the first model (that he mustn't sell that much) the others have the same case size, so that he's got roughly the same number of reed plates in all his models.

Thrupenny Bit

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 7232
  • happily squeezing away in Devon
Re: When do you use your low voice?
« Reply #31 on: October 29, 2020, 04:21:32 PM »

Ah yes. I didn't look at the first one but the others seemed a uniform size.
I'd had a conversation with Steve about this size aspect and wondered what Gaillard did, as I've heard one of his 3 row models up close and though not for me, I did like the sound.
Q

Logged
Thrupenny Bit

I think I'm starting to get most of the notes in roughly the right order...... sometimes!

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: When do you use your low voice?
« Reply #32 on: October 29, 2020, 05:23:39 PM »

Another possible factor about MM in a two-voice box and MM in a three-voice LMM box is that it might depend also on the overall pitch of the instrument. I have a feeling that a G/C box (being lower pitched) will have a different frequency absorbtion characteristics compared with (say) a D/G box. I've no evidence for this, except a gut feeling that it might be so. The MM setting on my three-voice 1914 G/C box sounds gorgeous!
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

playandteach

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3526
  • Currently a music teacher in a high school.
Re: When do you use your low voice?
« Reply #33 on: October 29, 2020, 09:55:44 PM »

Yes, it makes sense that the more gubbins ( technical
term  (:) ) inside then more likely to have  frequencies absorbed and so alter the sound.
I noted on Bertrand Gaillard's website whilst absent minded browsing some days back, he likes to 'let his reeds breath...' and has slightly larger case sizes of some instruments.
I'm sure it partly accounts for the mellow sound of some things such as Mory, Handy etc. as Steve and I have chatted about.
Q

....looks like -Y- has replied along similar lines as I type.
I'm sure that's also true of woodwind instruments (the wooden ones) the fewer 'extra' keys, the more free the wood is to move. Although I'm not comparing the two - as I know there's a lot of debate on the fact that the cases make no difference, where as the chamber size clearly does.
Logged
Serafini R2D2 GC, Serafini GC accs 18 bass

Howard Jones

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1203
Re: When do you use your low voice?
« Reply #34 on: October 30, 2020, 03:36:55 PM »

I mainly play a 3 stop Saltarelle Nuage.  My decision whether or not to bring in the low voice depends entirely on the tune.  Some tunes which spend a lot of time at the dusty end benefit from the additional depth the low voice brings, while others don't.  However it's not just the high notes, it can bring a lot to the lower notes as well.  I find it seems to particularly suit tunes in Bm.

I don't automatically reach for the low voice on high-pitchedtunes, but if I'm not happy with the sound then this the first thing to turn to.  The Nuage also has stops on the bass end to take out thirds and low notes from the chords, and I often end up experimenting with different combinations of right and left hand voicings to get the sound I want for that particular tune.

I also have a LMM G/C, which sounds absolutely gorgeous with the low voice switched on.

Rob2Hook

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2278
  • Castagnaris, Hohners & Baffetti
Re: When do you use your low voice?
« Reply #35 on: October 31, 2020, 02:57:58 PM »

Steve, you may be right that my 1914 would benefit from a little extra setting up.  But as I preferred the more open tone of my Trilly, I looked into getting another.  I was disappointed that the grille no longer has a graceful curve but a cheaper angled construction.  I suspect that the internal construction has also altered as the new models sound indistinguishable from the 1914 to my ears.  Indeed a friend tried out both with a sound meter and agreed with me that the volume and tone was no longer different as with my old (early) Trilly.

Meantime, the responsiveness of my 1914 is very even - no sign of the low reeds being reluctant to speak.  She'll do for me.

Rob.
Logged

george garside

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5401
Re: When do you use your low voice?
« Reply #36 on: October 31, 2020, 05:45:46 PM »

my main box for dance music (eg ceilidh, barn dance, old time etc) is a mml serenellini that has served me well for at least 20 years.  As others have said I sometimes bring in the low reeds if  a tune goes to the high end of the G row but I mailnly use it to thicken things up a bit when playing slower dance tunes eg old time waltzes  , canadian barn dance, gfay gordons etc etc as it helps to provide the dancers  with a steady rhythm and sounds great when shoving in right hand chords  and ornementations.

For fast jigs, reels etc I prefer  mm  as it reduces bellows movement  (and effort!) enabling  'crisper ' renditions if used with a light touch on the bass.

However  I sometimes do the opposite to what I have jsut quoted  if the fancy takes me  push depending on my mood and the purpost for which a tune is being played

I aften think that the  pull/knobs  on top of the treble end would be better replaced with piano accordion style bottom of grill couplers so that the low reed set  can be brought in or out on the hoof.
george



« Last Edit: October 31, 2020, 05:48:54 PM by george garside »
Logged
author of DG tutor book "DG Melodeon a Crash Course for Beginners".

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: When do you use your low voice?
« Reply #37 on: October 31, 2020, 07:03:59 PM »

Steve, you may be right that my 1914 would benefit from a little extra setting up.  But as I preferred the more open tone of my Trilly, I looked into getting another.  I was disappointed that the grille no longer has a graceful curve but a cheaper angled construction.  I suspect that the internal construction has also altered as the new models sound indistinguishable from the 1914 to my ears.  Indeed a friend tried out both with a sound meter and agreed with me that the volume and tone was no longer different as with my old (early) Trilly.

Meantime, the responsiveness of my 1914 is very even - no sign of the low reeds being reluctant to speak.  She'll do for me.

Rob.

When the Trillys first appeared (10 - 15 years ago?) there was definitely an issue with the middle few buttons of the inside row being slightly muted because of all the gubbins of the grille switches. However, the more recent Trillys do not have this drawback; something in the design has changed and the sound is now very even across the range and the rows, and they are very good boxes indeed.

But glad to hear that you llike your 1914 box! I think they are excellent; the 2-button half-row puts the accidentals just where you need them and frees up the chin end for low notes. I love mine!
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

Chris Ryall

  • "doc 3-row"
  • French Interpreter
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 11154
  • Wirral UK
    • Chris Ryall
Re: When do you use your low voice?
« Reply #38 on: November 01, 2020, 02:47:45 PM »

The maker I'm working with for my next box is also saying that he prefers boxes with as little registers and register mechanisms as possible, he has the impression that too much mechnisms (register plates and so on) alter the sound diffusion. (that being said, I couldn't have a box where you cannot have the L voice alone, and don't really mind, or for that matter often hear the difference).

Bertrand’s a lovely man, superb maker but he has his idées fixées. Leaned on me hard wrt my Saphir which goes down to Bb on right end, just over an octave below a DG’s B bass, and 2 below middle C. He really didn’t like the idea!

But it’s stable enough in LM mode, and played solo, I like having to coax the note out. Shakes the keyboard 😎

Don’t think Bertrand’s an improviser 😉 His daughter Celine (?) does though. The one in California

Very happy with his select switches. Complicated mechanisms can go wrong, and occasionally rattle.
Logged
  _       _    _      _ 

-Y-

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 896
  • Handry 18 (G/C), Mélodie (D), Club IIb (A/D)
    • a database of nearly 500 melodeons here
Re: When do you use your low voice?
« Reply #39 on: November 02, 2020, 09:25:28 AM »

I guess he didn't like it very much no, from what I gather he's very firm about his choices.
I think he put some kind of patent on his mechanisms actually. He has them made following his specs by a mechanics firm, whereas most of the makers just adapt what Carini supplies them.
Pages: 1 [2] 3   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal