Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: question about re-tuning hohner reeds  (Read 867 times)

0 Members and 1 Guest are viewing this topic.

Robin Parson

  • Good talker
  • **
  • Offline Offline
  • Posts: 53
  • Slowly going MAD...
question about re-tuning hohner reeds
« on: October 30, 2020, 08:43:08 AM »

Hello! I have a question about re-tuning the reeds on a hohner of mine. It's a 3 voice clubbed C/F- no idea how old it is, but definitely far from new!
I like the sound of lower boxes, so I'm planning to get it tuned down to G/C, or maybe even F/Bb.
My question is, can (old hohner) reeds be tuned down that far, or would I have to buy new reeds that are pitched lower? I don't know anything about tuning, so I have no idea of the extend to which the reeds can be altered. Thanks!
Logged

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: question about re-tuning hohner reeds
« Reply #1 on: October 30, 2020, 09:17:04 AM »

C/F to G/C is a long way to retune. It would be possible to do a certain amount of it by shuffling the reed plates into different positions and doing a bit of retuning, but (a) the receiving reed chambers might well be the wrong size and would need considerable modification, and (b) you would still need to source extra reeds to replace those which cannot be retuned because it would require too much alteration to the reed tongues.

As a general rule of thumb, it is usually possible to safely sharpen a reed by a semitone by filing. Flattening reeds can also be done by about a semitone by filing, but to go more than that would normally require adding a brasss or solder weight to the tip of the reed, which may affect how quickly the reed responds. Old, vintage, Hohner reeds are often very good quality and it would be a shame to compromise good reeds by trying to retune them too far.

A far better option is to look around for a G/C or Bb/Eb instrument already in that pitch.

Try contacting Mike Rowbotham or Martyn White, who tend to specialise in vintage Hohners.
http://www.michaelrowbotham.com/
https://www.melodeonrepairs.co.uk/
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

Microbot

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 345
Re: question about re-tuning hohner reeds
« Reply #2 on: October 30, 2020, 10:28:06 AM »

Hi Robin,

The best way to do any retuning of boxes is to move the reeds around for 'best fit'.

Well, you've got a C-row already! Shift those to the inner row!

Then, You can fiddle around with the F set, which can contribute towards the upper parts of a G-row, but the best thing is to source a set of G reeds complete. You can then use the original F row, plus the existing accidentals, to make up the AccidentLs you want by modest tuning.

It's best to get compatible reeds ... Probably zinc ones in an old club. I might have some.

By the way, say hi to your Dad, whom I knew many years ago when he used to visit Norwich and played box with the Irish musicians there ...I played Anglo concertina at the time.

Cheers

Mike R
Logged

MikeK

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 354
Re: question about re-tuning hohner reeds
« Reply #3 on: October 30, 2020, 12:56:04 PM »


 Robin, A while back, I sent Mike R a small 3row 8b Hohner that was tuned c/f. I asked if was possible to change it to b/c/c#. No problem.
 He did the conversion and afterwards it sounded fantastic.
 
 
Logged
I always respect my elders but they are getting fewer in numbers.

Robin Parson

  • Good talker
  • **
  • Offline Offline
  • Posts: 53
  • Slowly going MAD...
Re: question about re-tuning hohner reeds
« Reply #4 on: October 31, 2020, 01:57:52 AM »

Thanks for the info!

I had a feeling that the reeds couldn't be tuned so far, but I don't really know anything about the mechanical side of things, interesting to learn!

I think that in the new year I'll search for someone who's interested in a project, and leave the technical stuff up to them, haha. The box itself needs a fair bit of servicing as well. I think it should have a lovely big sound with three voices and the low reeds.

Mike- I will! He's still playing plenty and is based over in the west of Ireland. I seem to have inherited his interest in converting old hohners, haha
Logged
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal