Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1] 2 3   Go Down

Author Topic: USB-XLR interface  (Read 6965 times)

0 Members and 1 Guest are viewing this topic.

Hugh Taylor

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 437
    • Band web site: http://www.tumblingtom.co.uk
USB-XLR interface
« on: October 30, 2020, 03:38:12 PM »

I'd like to improve the quality of my playing sound when taking part in our Zoom session. I'm currently using a Logi camera with built in mic.
Which interface should I buy (without shelling out loads of money) to enable me to use a mic (not condenser) with a xlr connector.
Do I just need one input?
Should it have gain control?
Do I need a headphone socket?
Sorry, not very techie.
Logged
Castagnari Mory D/G, Castagnari Tommy D/G, Saltarelle C/F, Hohner Erika A/D
Tumbling Tom Band - http://www.tumblingtom.co.uk/

rees

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5055
  • Windjammer
    • Wesson Accordions
Re: USB-XLR interface
« Reply #1 on: October 30, 2020, 04:11:02 PM »

The Focusrite Scarlett range are very good for not too much money.
XLR in, switchable phantom power, gain control, stereo outs for amp and headphones.
.............. and they're red!
Logged
Rees Wesson (accordion builder and mechanic)
Gungrog, Welshpool, Wales, UK
www.melodeons.com

tirpous

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1403
Re: USB-XLR interface
« Reply #2 on: October 30, 2020, 04:19:47 PM »

Quote
.............. and they're red!

That sounds better, right ?  ;)
Logged

penn

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 574
Re: USB-XLR interface
« Reply #3 on: October 30, 2020, 05:03:03 PM »

I too like the Focusrite Scarletts - I have a oldish 2i2 which has two mic pres, and sounds and works well.
I also have a couple of MBox2 s which are pretty good value second hand - I paid about £30 for the last one. They do work on Windows 10. They have all the stuff you mention- 2 mic inputs, phantom, direct monitor mix control, headphone jack etc.
For zoom, 2 mics is maybe not important perhaps but having 2 will come in useful for recording.
Gren
Logged
Hohners, Dino Baffetti, Lilly, Benny + a lot of junk.

penn

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 574
Re: USB-XLR interface
« Reply #4 on: October 30, 2020, 05:04:19 PM »

Yes you’ll need a gain control for any mic. non-condensers are usually quiet and need a bit of boost.
Logged
Hohners, Dino Baffetti, Lilly, Benny + a lot of junk.

IanD

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1703
  • Too many melodeons...
Re: USB-XLR interface
« Reply #5 on: October 30, 2020, 05:05:37 PM »

The Focusrite Scarlett range are very good for not too much money.
XLR in, switchable phantom power, gain control, stereo outs for amp and headphones.
.............. and they're red!
The Behringer UMC20xHD are just as good according to reviews (I've got a 202HD) and half the price ;-)
.....and they're black, in case you hate red!
Logged
Oakwood Model 4 D/G, Castagnari Dony D/G/#, Castagnari Tommy G/C, Baffetti Binci D/G, Hohner Preciosa D/G, Melos Bb/Eb, Lightwave SL5 and Kala California fretless basses

Tone Dumb Greg

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4955
    • Dartmoor Border Morris
Re: USB-XLR interface
« Reply #6 on: October 30, 2020, 05:29:07 PM »

Just to give you an idea of what's available, anything on this page is likely to meet your needs. You'll note that two mic channels are fairly standard at entry levels, all though other options exist.All this stuff seems pretty capable.
The link is to Gear4Music. Other suppliers I have used selling the same sort of stuff are Dolphin Music, Digital Village. Anderton's and Thomann. All good to deal with.

https://www.gear4music.com/Soundcards/USB.html?page=1&sort=price,asc
Logged
Greg Smith
DG/GC Pokerwork, DG 2.4 Saltarelle, pre-war CF Hohner, Hohner 1040 Vienna style, old  BbEb Hohner that needs a lot of work.

ACCORDION, n. An instrument in harmony with the sentiments of an assassin. Ambrose Bierce

Andy Next Tune

  • aka Andy Wooles
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1127
  • Melodeon with Accidentals? Make a PI Claim!!!
    • www.shavethedonkey.co.uk
Re: USB-XLR interface
« Reply #7 on: October 30, 2020, 06:55:30 PM »

Another vote for Behringer. I've got a Xenyx Q802USB which combines mini mixer with USB audio interface. Inexpensive and a bit more versatile than a pure audio interface.
Logged
Andy, from the now ex-County Palatine of Cheshire

Caring for a European community of melodeons from France, Italy, Germany, Wales and Suffolk!

rileycat

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 429
Re: USB-XLR interface
« Reply #8 on: October 30, 2020, 07:26:11 PM »

May I piggy-back a 2nd non-techie question, please? Assuming I buy an interface, say a Behringer (as above), how can I hear how I'm sounding as I twiddle the knobs! I assume I must connect to my computer via USB to get the audio feed? Is it that straight-forward - please make replies as simple as possible, even if its 'Go away!'  :D Hangs head in shame!
Logged

Anahata

  • This mind intentionally left blank
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 6767
  • Oakwood D/G, C/F Club, 1-rows in C,D,G
    • Treewind Music
Re: USB-XLR interface
« Reply #9 on: October 30, 2020, 07:39:31 PM »

May I piggy-back a 2nd non-techie question, please? Assuming I buy an interface, say a Behringer (as above), how can I hear how I'm sounding as I twiddle the knobs! I assume I must connect to my computer via USB to get the audio feed? Is it that straight-forward - please make replies as simple as possible, even if its 'Go away!'  :D Hangs head in shame!

Try recording it with audacity.
First, you'll get a visual indication of level so you'll know if you're overloading it.
Second, you can play it back and listen without distraction.
Oh, and yes, just plug into USB socket. USB is supposed to be "Plug and Play" and there's a standard device protocol for audio so it doesn't need drivers (like when you plug a keyboard or mouse in, it just works) You might have to select the right input if plugging in it means you now have more than one sound input, but that's all there is to it.
Logged
Слава Україні !
Music recording and web hosting: www.treewind.co.uk
Mary Humphreys and Anahata: www.maryanahata.co.uk
Ceilidh band: www.barleycoteband.co.uk

Gena Crisman

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1108
  • 🇬🇧
Re: USB-XLR interface
« Reply #10 on: October 31, 2020, 07:37:53 AM »

I have a Behringer UMC404HD; When I was buying a year or so back, it seemed the Behringer devices of that generation which have 'Midas' preamps listed under every input were considered a good step better than the generation that came before them, but really that just meant they were competitive/as good a value proposition vs their similarly priced interfaces (eg Scarlet)

I chose this one because of that above information, and the features it could provide me (eg I might be recording 2 instruments + people at once so 4 inputs seemed like a must).

For monitoring, my audio interface has a 'headphone' port that allows me to monitor one pair or the other of inputs in real time via a pair of headphones or speakers. It can also function as a sound output device, and I actually use mine as my computer's main sound output full time. I believe you can monitor all the lines with additional gear, though. This means I can hear my computer's audio and monitor an input mic at the same time, if I want to. I've also occasionally plugged in some trash, old, unpowered PC speakers into it and that also works quite nicely.

It obviously supports proper XLR mics but note that the 48v Phantom Power is either all on, or, all off. It has 1/4" inputs that support instrument, line level, and an extra -20dB pad for especially loud inputs (typically drum kits, I understand). With my 4 XLR input version, you get extra features such as Midi in/out via DINs, and it can also function via an included 5v power supply so you can actually use it entirely without a PC present, if you're into that kind of thing. My PC keeps my USB ports powered all the time, even when turned off, but I now use the power supply with it all the time as I would often have to unplug/plug the device in every time I turned my PC on to get it to work properly.

In windows it can work as a bog standard 'I'm a microphone' sort of way but it can also work in the 'I'm a proper audio person' way, so it will jive happily with eg something relatively simple like Audacity as well as a DAW like eg Reaper.

I hope that experience is helpful in some capacity.
Logged

rileycat

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 429
Re: USB-XLR interface
« Reply #11 on: October 31, 2020, 10:32:35 AM »

Thanks, Anahata - I like 'it just works'.  That's a feature I find missing in most tech stuff I attempt!
Logged

Hugh Taylor

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 437
    • Band web site: http://www.tumblingtom.co.uk
Re: USB-XLR interface
« Reply #12 on: October 31, 2020, 10:41:46 AM »

Thanks to all the above for your valuable contributions.
I've gone for the Behringer UMC404HD. I would have liked the Focusrite Scarlett as they're red, but never mind, I'll cope.
Logged
Castagnari Mory D/G, Castagnari Tommy D/G, Saltarelle C/F, Hohner Erika A/D
Tumbling Tom Band - http://www.tumblingtom.co.uk/

penn

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 574
Re: USB-XLR interface
« Reply #13 on: October 31, 2020, 01:08:56 PM »

USB is supposed to be "Plug and Play" and there's a standard device protocol for audio so it doesn't need drivers (like when you plug a keyboard or mouse in, it just works)
That’s not entirely true. UAC and UAC2 are standard protocols but most devices - Focusrite, MBox, RME, etc.(I have no experience of Behringer)  have their own drivers which need to be installed. The interfaces that the company I work for make are UAC2 compliant but still require drivers because for many years Windows didn’t provide a UAC2 driver. It does now, but it’s not great.
You may also get an ASIO driver with the driver package for Windows, which in general, I would use if the software supported it.
Gren
Logged
Hohners, Dino Baffetti, Lilly, Benny + a lot of junk.

Tone Dumb Greg

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4955
    • Dartmoor Border Morris
Re: USB-XLR interface
« Reply #14 on: October 31, 2020, 06:31:09 PM »

USB is supposed to be "Plug and Play" and there's a standard device protocol for audio so it doesn't need drivers (like when you plug a keyboard or mouse in, it just works)
...most devices - Focusrite, MBox, RME, etc.(I have no experience of Behringer)  have their own drivers which need to be installed...

Behringer audio devices use  an "ASIO4 ALL" driver, a copy of which should come with your device and it is available on Behringer's website.

The reason for using ASIO drivers is, largely , to minimise latency. Latency is a processing delay which can make things awkward.
The ASIO drivers inluded in Windows 10 seem to work fine, though.
« Last Edit: October 31, 2020, 06:36:17 PM by Tone Dumb Greg »
Logged
Greg Smith
DG/GC Pokerwork, DG 2.4 Saltarelle, pre-war CF Hohner, Hohner 1040 Vienna style, old  BbEb Hohner that needs a lot of work.

ACCORDION, n. An instrument in harmony with the sentiments of an assassin. Ambrose Bierce

Anahata

  • This mind intentionally left blank
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 6767
  • Oakwood D/G, C/F Club, 1-rows in C,D,G
    • Treewind Music
Re: USB-XLR interface
« Reply #15 on: October 31, 2020, 08:54:22 PM »

Apologies for being misleading about drivers.
Even so, many devices are also USB2 class compliant, which means there is basic audio input and output functionality without needing drivers. They may still need special software to access features like internal routing or processing.

Latency is only an issue if you are going to be a making multi-track recordings.
Logged
Слава Україні !
Music recording and web hosting: www.treewind.co.uk
Mary Humphreys and Anahata: www.maryanahata.co.uk
Ceilidh band: www.barleycoteband.co.uk

Tone Dumb Greg

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4955
    • Dartmoor Border Morris
Re: USB-XLR interface
« Reply #16 on: October 31, 2020, 09:15:21 PM »

Latency is only an issue if you are going to be a making multi-track recordings.

Or, maybe, doing Zoom conferences. I have a number of USB audio devices and I have  used ASIO drivers, since I had a latency problem with the first one I used (a midi keyboard). Technology seems to move on faster than I do.
Logged
Greg Smith
DG/GC Pokerwork, DG 2.4 Saltarelle, pre-war CF Hohner, Hohner 1040 Vienna style, old  BbEb Hohner that needs a lot of work.

ACCORDION, n. An instrument in harmony with the sentiments of an assassin. Ambrose Bierce

Chris Brimley

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2038
Re: USB-XLR interface
« Reply #17 on: November 01, 2020, 11:37:06 AM »

Many people have responded with very useful advice about interfaces, re Hugh's original question, and I think I've been persuaded to go for a Behringer myself, following the discussion.

However, it struck me that Hugh's need was to improve his sound for Zoom meetings, and there may be other issues here than just the device microphone's quality, perhaps with other solutions.

The first thing is that you really need a decent broadband speed to participate in a Zoom music meeting, and Zoom's information about this is available if you delve into it, but it's not easy to find, and it's certainly not upfront when you set up Zoom, as it should be.  I'm not sure that it's practical to achieve a reasonable sound unless you have fibre-to-box or full fibre connections for your broadband, because I'm not sure you'll have enough upload bandwidth.  Zoom (at long last!) now recommend: For group video calling: 600kbps/1.2Mbps (up/down) for high quality video. For gallery view: 1.5Mbps/1.5Mbps (up/down).  But this doesn't cover the specific needs of musicians, and you may need even more.  The upload speed is the killer for many would-be participants.  If you don't have that sort of upload speed, it may be necessary to turn off your video, which rather spoils the experience for the group!  Again, Zoom are not upfront about this.  And worst of all, it's very difficult for a participant to hear just how bad their sound is, that everybody else is hearing.  So they are often blithely unaware.

The next thing that may help is to find out whether your computer/device has an input-output mini jack socket (or separate microphone input socket), so that you could use its own audio interface.  Many devices seem to have in/out sockets these days (not always true of phones, it seems, which is why I've only recently found out about this!).  If yours has one of these combined sockets, what you could do is to buy a y-splitter cable (£2-3?), and plug your sound input into the pink socket of that, and your headphones into the green.  In some cases, a microphone might work directly, but probably you'll be using the line-level output from an amp of some sort into which you've plugged your microphone. 

Or instead of all this, as we've discussed before here, you can use the internal microphones and input/output interface of a small recorder like the Zoom (no relation) H2, plugged into one of the computer/device's USB sockets.  When I just wanted one input, for me that was the simplest way of getting high quality sound into my computer.

But the next and possibly most important next thing about Zoom music meetings is that you need to disable the horrible and aggressive sound modifying software that comes as default on your device to try to make speech alone work audibly.  This means several things:  First, you need to set the Zoom audio to 'Original Sound', which I'm afraid isn't always available on many devices.  (On the latest updated version of Zoom, there's more advanced options available on this, too.)  Second, everyone else at the meeting needs to mute themselves when you're playing, including the organiser.  If they don't, it's more than likely that the system will set up audio feedback loops somehow, which the software will recognise, and probably try to neutralise, which ruins the sound for everybody, and you'll get the familiar underwater sound, and often lose your sound completely as your device tries to .  (I should say we've found that not everyone agrees with this, particularly those with devices which have no facility to deactivate the audio modifying software, and it may prove difficult to persuade them because they can't see the benefit!)

In fact, my experience is that Zoom music meetings are often just not working very well, because many participants don't have a suitable device, enough broadband bandwidth, or understand how to overcome the messy sound that Zoom gives musicians by default.  Frequently if you go to a meeting, you will hear guitars that sound like banjos because the software assumes it's a background noise and attenuates each note, singing that comes across OK because the software has recognised that it's a voice while the accompaniment is often cut out, and whistles or accordions that sound OK for a bit and then just cut out because it's been cut by the software for some unknown reason related to the type of sound it recognises.
Logged

Chris Brimley

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2038
Re: USB-XLR interface
« Reply #18 on: November 01, 2020, 11:49:02 AM »

Gena, with the Behringer, I was interested in your comment about being able to switch from monitor to computer output with the A/B button.  With my current system, I am monitoring my performance with the headphones out of my audio mixer as it goes into the computer's interface, so can't hear the meeting output from other meeting participants.  I have to physically insert and remove my headphones from mixer to computer at the beginning and end of my contribution, and it's a faff.  You're using the A/B button to do this, right?  I did also wonder about using one side of the headphones for input, the other for output, but like hearing both channels really. 

I should say that I have learnt never to have loudspeakers on when unmuted, it's just too risky in setting up unwanted sound feedback echos.
Logged

CAB

  • Mass Debater
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1147
    • Somerset Russets Village Band
Re: USB-XLR interface
« Reply #19 on: November 01, 2020, 02:23:59 PM »

But the next and possibly most important next thing about Zoom music meetings is that you need to disable the horrible and aggressive sound modifying software that comes as default on your device to try to make speech alone work audibly.  This means several things:  First, you need to set the Zoom audio to 'Original Sound', which I'm afraid isn't always available on many devices.  (On the latest updated version of Zoom, there's more advanced options available on this, too.)  Second, everyone else at the meeting needs to mute themselves when you're playing, including the organiser.  If they don't, it's more than likely that the system will set up audio feedback loops somehow, which the software will recognise, and probably try to neutralise, which ruins the sound for everybody, and you'll get the familiar underwater sound, and often lose your sound completely as your device tries to .  (I should say we've found that not everyone agrees with this, particularly those with devices which have no facility to deactivate the audio modifying software, and it may prove difficult to persuade them because they can't see the benefit!)
The muting thing can certainly be an issue.  At some of the Zoom singarounds I've been frequenting, the host mutes and unmutes everyone at the start and end of each contribution.  This always feels a bit officious but does ensure that no one is left on, with the resulting problems you describe.  (I just wish they wouldn't unmute me at the precise moment I'm saying something uncomplimentary about the last singer.  :-[)
On several occasions I've talked someone through turning on original sound and manual volume control in the course of a meeting.  It only takes a few seconds.  The problem seems to be Macs, where I get the impression this has to be done before the meeting.

Logged
Pas de lieu Rhone que nous
Pages: [1] 2 3   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal