Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: 1 [2] 3   Go Down

Author Topic: USB-XLR interface  (Read 6981 times)

0 Members and 1 Guest are viewing this topic.

Chris Brimley

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2038
Re: USB-XLR interface
« Reply #20 on: November 01, 2020, 02:32:25 PM »

Quote
At some of the Zoom singarounds I've been frequenting, the host mutes and unmutes everyone at the start and end of each contribution.

Including him/herself? 

Also, are you sure the host unmutes everyone at the end of a contribution? - I didn't know that was possible.
Logged

IanD

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1703
  • Too many melodeons...
Re: USB-XLR interface
« Reply #21 on: November 01, 2020, 02:55:43 PM »

With Zoom don't just turn original sound on, also disable background noise suppression and automatic level control and set the mic level manually.
Logged
Oakwood Model 4 D/G, Castagnari Dony D/G/#, Castagnari Tommy G/C, Baffetti Binci D/G, Hohner Preciosa D/G, Melos Bb/Eb, Lightwave SL5 and Kala California fretless basses

Chris Brimley

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2038
Re: USB-XLR interface
« Reply #22 on: November 01, 2020, 03:14:34 PM »

Yes, although it's not at all clear from the help which of these functions predominates.  There's of course also the hifi options, but again I wish Zoom would actually set out the bandwidth minimum requirements for all these options and sub-options.
Logged

IanD

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1703
  • Too many melodeons...
Re: USB-XLR interface
« Reply #23 on: November 01, 2020, 03:18:13 PM »

Yes, although it's not at all clear from the help which of these functions predominates.  There's of course also the hifi options, but again I wish Zoom would actually set out the bandwidth minimum requirements for all these options and sub-options.
Background noise suppression turns the gain down when it thinks there's no signal e.g. so you can't hear quiet bits in a song.
Auto level control turns the gain down if there's one loud bit, so everything afterwards is too quiet.
Both are bad for either song or music.
Logged
Oakwood Model 4 D/G, Castagnari Dony D/G/#, Castagnari Tommy G/C, Baffetti Binci D/G, Hohner Preciosa D/G, Melos Bb/Eb, Lightwave SL5 and Kala California fretless basses

Steve C.

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2075
  • Erica, Morse Anglo
Re: USB-XLR interface
« Reply #24 on: November 01, 2020, 03:27:24 PM »

Another +1 for Behringer Xenyx, even the cheap models like the Q502.  Also work well as a Streb interface.
Logged
Located in Central North Carolina, USA; credit for picture: livingplanet.ca

Chris Brimley

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2038
Re: USB-XLR interface
« Reply #25 on: November 01, 2020, 04:07:55 PM »

Sure Ian, my query was whether 'Original Sound' deactivates both of these effects, and maybe other things too.
Logged

Gena Crisman

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1108
  • 🇬🇧
Re: USB-XLR interface
« Reply #26 on: November 01, 2020, 04:20:31 PM »

Gena, with the Behringer, I was interested in your comment about being able to switch from monitor to computer output with the A/B button.  With my current system, I am monitoring my performance with the headphones out of my audio mixer as it goes into the computer's interface, so can't hear the meeting output from other meeting participants.  I have to physically insert and remove my headphones from mixer to computer at the beginning and end of my contribution, and it's a faff.  You're using the A/B button to do this, right?  I did also wonder about using one side of the headphones for input, the other for output, but like hearing both channels really. 

So, with the live monitoring on the device, the UMC404HD I have presents itself to windows as a pair of stereo inputs (chan 1/2 and 3/4), and a pair of stereo outputs, again, 1/2 and 3/4. That is, unless you're talking to it like DAWs do which is I guess via ASIO? Then it's a full 4 in and I assume 4 out? So to general standard windows PC software, it's almost like you have 2 separate things connected? I guess? It's because the device connects via USB and presents itself to the computer as both inputs and outputs that I'd be be able to use it in this fashion.

The A/B button on the front of the device sends either channels 1/2 (ie, A) or 3/4 (ie, B) to the device's headphone jack. These are a mix of the live signals from your mic inputs, either 1/2 or 3/4 on the device, plus any stereo output from the computer on the matching device. (edit, this was a bit wrong, see my post here) The balance of these signals is determined by the 'Mix' knob, and then there's the adjacent volume control for general loudness on the headphones. The knob below relates to main out, which is I think an unamped output on the back, but, I don't use it for anything atm and don't know if it's paired channels or all 4 or what. Despite hinting at it, it seems to me that the mono/stereo button only applies to the current 1/2 or 3/4 pair selected: so effectively, with just the device alone, I have no way to live monitor my mic in input 1 when on the B monitor channel. (edit: You can indeed live monitor all 4 inputs - in fact you can only monitor all 4 at once.)

So, if you want to hear yourself play via the front headphone jack, you'd probably have to use only 2 inputs? If you want to hear your computer at the same time, you'd have to have to select the appropriate output channel as a sound device, and dial the Mix knob in correctly.
« Last Edit: December 04, 2020, 04:52:08 PM by Gena Crisman »
Logged

CAB

  • Mass Debater
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1147
    • Somerset Russets Village Band
Re: USB-XLR interface
« Reply #27 on: November 01, 2020, 04:48:38 PM »

Quote
At some of the Zoom singarounds I've been frequenting, the host mutes and unmutes everyone at the start and end of each contribution.

Including him/herself? 

Also, are you sure the host unmutes everyone at the end of a contribution? - I didn't know that was possible.

Oh yes, positive.  I've become very used to zooming several times a week recently.  In fact I've done it when running zoom meetings myself.  If it's someone else's meeting and I've muted myself before he had a chance to mute me, then when he unmutes everyone I get a message saying he wants me to unmute myself.  So the host can unmute people s/he has muted.
Logged
Pas de lieu Rhone que nous

Chris Brimley

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2038
Re: USB-XLR interface
« Reply #28 on: November 01, 2020, 04:56:55 PM »

CAB, using a message appears to imply the control by the host is not direct, it requires the participant to unmute when they've received that message, if I've understood it right?  I've not been a host, and haven't subscribed to the big version of Zoom, so don't know how this works for the host.
Logged

Chris Brimley

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2038
Re: USB-XLR interface
« Reply #29 on: November 01, 2020, 05:02:39 PM »

Gena, I think your conclusion is that a performer can hear themselves playing directly, plus the (latency-delayed) meeting sound output, using the Behringer's monitor function.  Using the A/B button won't work, but isn't necessary.  I think that's good enough for me (we had a similar conversation when I was trying to use my Zoom H2 recorder for in and out, I think?)
Logged

Anahata

  • This mind intentionally left blank
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 6767
  • Oakwood D/G, C/F Club, 1-rows in C,D,G
    • Treewind Music
Re: USB-XLR interface
« Reply #30 on: November 01, 2020, 05:07:02 PM »

Also, are you sure the host unmutes everyone at the end of a contribution? - I didn't know that was possible.

It depends which version of Zoom you are running (and possibly which versions the participants are running too.)

Zoom used to allow host to unmute everyone, then they disabled that function, then they re-enabled it. (or was that when they replaced it with the "unmute request" message? I'm not sure now...)

And on the subject of audio settings, the Linux Zoom client doesn't seem to have any advanced audio settings - no button in the usual place to access them. It's there on Windows, and on my Android tablet. I've never found any documentation confirming this. Any other Linux Zoom users here who could comment?
Logged
Слава Україні !
Music recording and web hosting: www.treewind.co.uk
Mary Humphreys and Anahata: www.maryanahata.co.uk
Ceilidh band: www.barleycoteband.co.uk

Gena Crisman

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1108
  • 🇬🇧
Re: USB-XLR interface
« Reply #31 on: November 01, 2020, 05:24:19 PM »

Gena, I think your conclusion is that a performer can hear themselves playing directly, plus the (latency-delayed) meeting sound output, using the Behringer's monitor function.  Using the A/B button won't work, but isn't necessary.  I think that's good enough for me (we had a similar conversation when I was trying to use my Zoom H2 recorder for in and out, I think?)

I'm operating on not quite enough sleep right now, and I don't really follow. I can say that if you want to use the A/B button to swap, that's actually how I use it right now - I only have my mic on the first couple of input channels (A) and my computer audio is set to use (B) to output so I can push the button to swap if I wanted to, or if I want both I can set my PC output to A, I guess. You can achieve the same thing by putting them both on A and moving the mix knob to either extreme, too.

Sorry if I'm not getting it.
Logged

Chris Brimley

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2038
Re: USB-XLR interface
« Reply #32 on: November 01, 2020, 05:29:16 PM »

Yes, Anahata, what you say seems right. I'm running the latest version of Zoom, but they've only recently introduced these so-called 'advanced options' in their software.  I would have thought that allowing a host to unmute another participant directly might conflict with privacy principles.

Sorry, can't comment on Linux.  I believe that many earlier ipad users may be in the same boat. I have no idea how Zoom deals with people with different equipment meeting up.
Logged

Chris Brimley

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2038
Re: USB-XLR interface
« Reply #33 on: November 01, 2020, 05:31:37 PM »

Sorry, Gena, it's me that didn't understand your earlier reply.  That sounds good - allows the option of switching from own sound to meeting sound, or a mix of both together.
Logged

CAB

  • Mass Debater
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1147
    • Somerset Russets Village Band
Re: USB-XLR interface
« Reply #34 on: November 01, 2020, 08:22:08 PM »

CAB, using a message appears to imply the control by the host is not direct, it requires the participant to unmute when they've received that message, if I've understood it right?  I've not been a host, and haven't subscribed to the big version of Zoom, so don't know how this works for the host.

My experience:  If the host has muted participants, they can also unmute them.
If a participant has self-muted, the host cannot unmute them.  Not sure about how the request to unmute is generated - possibly automatic when host unmutes everyone else?
Logged
Pas de lieu Rhone que nous

Chris Brimley

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2038
Re: USB-XLR interface
« Reply #35 on: November 01, 2020, 09:47:58 PM »

Ah, just found this on Zoom support, which hopefully clarifies the Zoom muting point:

Overview
As the host or co-host in a meeting, you can manage your participants, including muting and unmuting participants to manage background noise and distractions. All participants can also mute or unmute themselves, unless the host has prevented them from unmuting.

Due to privacy and security reasons, the host cannot unmute other participants without their consent. The host can either use the Ask All to Unmute option, which will prompt every user to unmute themselves, or can schedule the meeting with Request permission to unmute participants enabled, which will prompt the participants for pre-approval to be unmuted by the host.

Logged

IanD

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1703
  • Too many melodeons...
Re: USB-XLR interface
« Reply #36 on: November 03, 2020, 10:40:51 AM »

Sure Ian, my query was whether 'Original Sound' deactivates both of these effects, and maybe other things too.
AFAIK "Original Sound" just deactivates the encoding which is used (and works) on voices to reduce the audio bitrate, but completely mangles instruments either played alone or used to accompany singing. It definitely leaves auto level control and background noise cancellation on. Best thing is to turn all these off and then manually set the mic level control using the slider and the level meter so it peaks near maximum but doesn't clip.
Logged
Oakwood Model 4 D/G, Castagnari Dony D/G/#, Castagnari Tommy G/C, Baffetti Binci D/G, Hohner Preciosa D/G, Melos Bb/Eb, Lightwave SL5 and Kala California fretless basses

Gena Crisman

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1108
  • 🇬🇧
Re: USB-XLR interface
« Reply #37 on: November 03, 2020, 01:39:55 PM »

I'll just leave this (attachment) here.

It seems there's some extra options there that I would want to check that weren't there before, so, I guess I do suggest a trip to the advanced audio options.
« Last Edit: November 03, 2020, 01:42:57 PM by Gena Crisman »
Logged

Chris Brimley

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2038
Re: USB-XLR interface
« Reply #38 on: November 03, 2020, 02:52:38 PM »

Yes, this version of Zoom does improve things on the situation a couple of months ago, but there's a few snags to take account of:  First, for hifi sound you may need more upload bandwidth than you've got.  I have only 1MBps, and that's from a 'fibre to box' connection, rather than just a copper wired connection which many of us use - and unfortunately Zoom doesn't set out the bandwidth requirement consequences of these advanced settings.  Second, note that this is only for Windows and Mac computers - many participants in my experience are using ipads or smartphones.

One point to note is that the stereo option doesn't seem worth selecting for many people - there's no point in doubling your data upload requirement if you're close to the limit, and for live performances of a single participant heard through a variety of devices, how many would really notice whether it's in stereo?

And also, I don't think Zoom are highlighting enough the problem for many musician users of lack of bandwidth in their internet connections - one thing we should surely be able to do is to cut down our video signal when performing, such as by using a lower resolution camera, or fewer frames per second.  It would be great to be able to specify that you wanted to prioritise sound data over video, when you're short of bandwidth.  But again they don't set these issues out at all clearly, and often it's just not possible to do what ought to be available.

Logged

Chris Brimley

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2038
Re: USB-XLR interface
« Reply #39 on: November 03, 2020, 03:04:00 PM »

Ian, yes, my preference has been to opt for Original Sound, and also turn off Auto Level Control and Background Noise Suppression, just in case 'Original Sound' didn't do those things too.  But again, why on earth don't they explain it better!  There must be thousands, if not millions, of people across the world trying to understand the Zoom system at the moment, and I feel we deserve better!
Logged
Pages: 1 [2] 3   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal