Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Making boosters / contropelli / dot-and-spine  (Read 2070 times)

0 Members and 1 Guest are viewing this topic.

Gonk

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 507
  • (Mudlark Music)
    • Mudlark Music
Making boosters / contropelli / dot-and-spine
« on: November 02, 2020, 03:03:00 PM »

Hello all. I'm looking for a good method to make valve boosters from scratch. I have plenty of trimmed valve leather to use for dots. I am looking for some kind of flat wire, preferably in a few gauges, to use for the spines. I'm not sure where to look - perhaps it doesn't exist, and I need to be looking for thin sheet metal instead. Any suggestions? Thanks!
« Last Edit: November 26, 2020, 03:40:06 PM by Gonk »
Logged
Mudlark Music - restoration, repairs, lessons, and sales.  (USA)  http://mudlark-music.com

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Making boosters / contrapelli / dot-and-spine
« Reply #1 on: November 02, 2020, 03:08:57 PM »

The material they are made of is more like shim stock than flat wire.  Just measured some - .001” thickness. 

Valves are such a critical component that I question the wisdom of making them from scratch. Purpose made ones aren’t even expensive. 
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Gonk

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 507
  • (Mudlark Music)
    • Mudlark Music
Re: Making boosters / contrapelli / dot-and-spine
« Reply #2 on: November 02, 2020, 03:41:59 PM »

Theo, thanks, that looks like the right stuff.

It's true that they're relatively inexpensive in the scheme of things - about 25c each here - but I am curious to see if I can make ones that perform just as well.  The answer may indeed be no.
Logged
Mudlark Music - restoration, repairs, lessons, and sales.  (USA)  http://mudlark-music.com

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Making boosters / contrapelli / dot-and-spine
« Reply #3 on: November 02, 2020, 03:54:09 PM »

€0.008 each from Carini but you have to buy 2000 of one size.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Gonk

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 507
  • (Mudlark Music)
    • Mudlark Music
Re: Making boosters / contrapelli / dot-and-spine
« Reply #4 on: November 02, 2020, 04:40:36 PM »

I am guessing it's €0.08 rather than .008?  Otherwise the 2000 would be €16 -- but €160 isn't bad either.  That will likely turn out to be the way to go, in the end.  I just put in an order for $6 worth of shim stock - 6x8" - which, if it turns out I can cut it precisely enough and without much waste, could make around 1000-1500 spines.

Thanks for the replies.
Logged
Mudlark Music - restoration, repairs, lessons, and sales.  (USA)  http://mudlark-music.com

Winston Smith

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4066
  • AKA Edward Jennings
    • "Our Luxor B&B" Luxor life, slice by slice.
Re: Making boosters / contrapelli / dot-and-spine
« Reply #5 on: November 02, 2020, 04:55:16 PM »

160 Euros!!??
Logged
At last, broken and resigned to accept conformity.
Oh, how I LOVE Big Brother!

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Making boosters / contrapelli / dot-and-spine
« Reply #6 on: November 02, 2020, 05:16:00 PM »

€0.008 is correct, €16 for 2000,  +22%tax, plus delivery ...
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Gonk

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 507
  • (Mudlark Music)
    • Mudlark Music
Re: Making boosters / contrapelli / dot-and-spine
« Reply #7 on: November 02, 2020, 05:20:09 PM »

Oh, wow.  I'm paying too much.  2000 contrapelli here would be 500 USD.

I'm seeing why you are surprised that I want to make my own.  I'll write to Carini.
Logged
Mudlark Music - restoration, repairs, lessons, and sales.  (USA)  http://mudlark-music.com

tirpous

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1403
Re: Making boosters / contrapelli / dot-and-spine
« Reply #8 on: November 02, 2020, 07:29:45 PM »

I do not have his latest price list but a few years ago Frank Romano (FRM Enterprises) prices were $7.50 for 100 of a specific size and $15 for 200 assorted size.  He used to be in Montreal (Canada) but moved to the Boston area around 2016.
Logged

Peadar

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2039
Re: Making boosters / contrapelli / dot-and-spine
« Reply #9 on: November 02, 2020, 07:51:14 PM »

Guys:  it's the difference between domestic retail prices and wholesale/feedstock prices.

If you are only buying a very small number of small items, most of the cost to the seller is in the time it takes to get the thing out of the stores and into your paws. If you are buying in bulk what drives the price is the cost of raw materials plus the costed running time of the machinery that stamps it into little discs or whatever you are looking for.

From the purchaser side - how many do you want to do now and where are you going to store the others till you need them...OK for the sad cases of MAD there's plenty of storage space inside the as yet unrestored boxes in your collection....but for us amateurs.....
Logged

mselic

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1683
Re: Making boosters / contrapelli / dot-and-spine
« Reply #10 on: November 02, 2020, 09:17:34 PM »

I do not have his latest price list but a few years ago Frank Romano (FRM Enterprises) prices were $7.50 for 100 of a specific size and $15 for 200 assorted size.  He used to be in Montreal (Canada) but moved to the Boston area around 2016.

Frank Romano (FRM Enterprises) has been my wholesale supplier for the last two years. I like him (and his extremely well-organized catalogue), but I have to admit the Carini is considerably less expensive, particularly for things like valves, and I’ll likely switch over to him for future purchases...
Logged
C#/D player

Gonk

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 507
  • (Mudlark Music)
    • Mudlark Music
Re: Making boosters / contropelli / dot-and-spine
« Reply #11 on: November 26, 2020, 03:44:28 PM »

The order with tax+post to US from Carini came to 57 USD / 43 GBP.  2000 spines -- I think I should be all set for my next 100 repairs or so!

And for anyone considering the shim stock option, I can say: brass is too soft, I'm guessing I should have tried .001" steel.
Logged
Mudlark Music - restoration, repairs, lessons, and sales.  (USA)  http://mudlark-music.com

Rog

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2525
  • Repair and tuning in Hants
Re: Making boosters / contropelli / dot-and-spine
« Reply #12 on: November 27, 2020, 08:34:02 AM »

*if* I was making booster springs (I wouldn’t but if I needed to) I’d used piano wire. I keep a selection of a few gauges for spring making, reed hook making and other things.

Gonk

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 507
  • (Mudlark Music)
    • Mudlark Music
Re: Making boosters / contropelli / dot-and-spine
« Reply #13 on: November 27, 2020, 01:09:20 PM »

RogerT, I had high hopes for instrument wire...I experimented with the highest and thinnest metal strings I have lying around (guitar, mandolin) and found them too stiff at short lengths.  I'm guessing they'd be about right for a bass reed, but for valves that are only 2 or 3cm, they don't allow enough flex.
Logged
Mudlark Music - restoration, repairs, lessons, and sales.  (USA)  http://mudlark-music.com

Rog

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2525
  • Repair and tuning in Hants
Re: Making boosters / contropelli / dot-and-spine
« Reply #14 on: November 27, 2020, 06:21:57 PM »

Sounds like piano wire might not be suitable then. I do also have guitar/mando strings around the place, though it’s not occurred to me to use it in place of piano wire. Assume as it’s spring wire the characteristics are the same. And one probably spikes one's thumb in a similar way

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Making boosters / contropelli / dot-and-spine
« Reply #15 on: November 27, 2020, 07:12:42 PM »

RogerT, I had high hopes for instrument wire...I experimented with the highest and thinnest metal strings I have lying around (guitar, mandolin) and found them too stiff at short lengths.  I'm guessing they'd be about right for a bass reed, but for valves that are only 2 or 3cm, they don't allow enough flex.

Shouldn’t be needed on valves that short. Are you using the right leather?
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

chris hall

  • Regular debater
  • ***
  • Online Online
  • Posts: 246
Re: Making boosters / contropelli / dot-and-spine
« Reply #16 on: November 27, 2020, 08:06:39 PM »

cgm music also do booster springs very cheap and dots to go with them (which are self adhesive but need extra glue)...his dots come in assorted colours but i like the red ones as they look smart. he supplies then in various gauages/widths.
Logged

Gonk

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 507
  • (Mudlark Music)
    • Mudlark Music
Re: Making boosters / contropelli / dot-and-spine
« Reply #17 on: November 27, 2020, 08:39:32 PM »

Theo, only time I'd do it is when the valves are mounted flush on the fondo, together with feet on the bottom.  Sort of like the cassotto in a piano accordion.  I guess I could also move the feet to the side, but it seems a bit awkward -- this way is a little more foolproof.  As long as it doesn't affect the response.
Logged
Mudlark Music - restoration, repairs, lessons, and sales.  (USA)  http://mudlark-music.com
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal