Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Older Castagnari fingerboard fixing/s  (Read 1476 times)

0 Members and 1 Guest are viewing this topic.

Nigel.H

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 586
Older Castagnari fingerboard fixing/s
« on: November 04, 2020, 08:00:32 PM »

Before I take on the slides job I have on the cards, I am doing a little cosmetic tidy up on the older Dony I recently bought via the Forum.

One of the jobs I want to do is a 'fix' on the corner of the finger board where it has had a bang and is missing a small chunk.  Ideally I would remove it from the fondo/case......I have undone the x2 "obvious" mounting screws on the reed-block side, which I had expected would release it and removed the levers but it doesn't seem to want to "give".

Is it likely it has been glued in the Factory? or is it possibly the "finish" acting as a bond.  It seems pretty solidly connected if it is just the varnish holding it.  I can probably manage to effect the fix with it in situe if needs be.  If it is glued, I would rather leave it as it is. 

The Law of S-D say's it will come apart just when I don't want it to if I take it for granted.
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Older Castagnari fingerboard fixing/s
« Reply #1 on: November 04, 2020, 08:29:02 PM »

I can’t think that I’ve ever seen a Castagnari where the keyboard is not glued in. 
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Nigel.H

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 586
Re: Older Castagnari fingerboard fixing/s
« Reply #2 on: November 04, 2020, 08:41:32 PM »

Thank's Theo, glued in then, it shall stay.
Logged

pete /acorn

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 930
  • .Cast Trilly
    • Acorn Instruments
Re: Older Castagnari fingerboard fixing/s
« Reply #3 on: November 05, 2020, 09:03:27 AM »

I have one identical to yours in stock,I will have a look at mine however,as Theo says they are normally well glued.

What wood is yours in,if it is Maple,send me your address and I will send you a piece FOC

Pete

Logged
Acorn Instruments are specialist retailers of Castagnari Instruments,and have an extensive stock of new instruments on the shelf for prompt delivery in standard layouts however these can easily be changed to customers special requirements,we have over 600 reeds in stock
 We also have the largest stock in the UK of  pre loved melodons all fully serviced,and with 12 months warranty
UK and international customers catered for
www.acorninstruments.co.uk

Nigel.H

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 586
Re: Older Castagnari fingerboard fixing/s
« Reply #4 on: November 05, 2020, 02:59:24 PM »

Hi Pete, that is a kind offer....but....I don't think it is Maple ? although it may have aged to the 'honeyed' colour it is showing?  More likely Cherry'ish ??

As it is the window pane model with the Mahogany reinforced rim to the case for the pins I have refinished the chipped/'eroded' front edge of the case in mahogany too and the front edge of the fingerboard with a similar full length inset of wood to sort out the broken section at the 'horn' and some smaller dinks and grinds.

The original wood has a very open grain pattern and any replacement would be obvious either way, so picking it out with the dark wood, as a contrast, is 'in keeping' with the original build and functional as it has a nice clean, more knock resistant edge.

PS....let me know about the Gig bag options when you have had a chance to look....
   
Logged

rees

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5055
  • Windjammer
    • Wesson Accordions
Re: Older Castagnari fingerboard fixing/s
« Reply #5 on: November 05, 2020, 04:00:26 PM »

Casting my mind back to 1984, I believe these were made from Sycamore.
Logged
Rees Wesson (accordion builder and mechanic)
Gungrog, Welshpool, Wales, UK
www.melodeons.com

Nigel.H

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 586
Re: Older Castagnari fingerboard fixing/s
« Reply #6 on: November 05, 2020, 04:06:53 PM »

Casting my mind back to 1984, I believe these were made from Sycamore.

A Rose ( or Acer ) by any other name, so to speak.... :D
Logged

Squeaky Pete

  • Squeaky Pete
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1327
  • Re-hohn a Hohner
Re: Older Castagnari fingerboard fixing/s
« Reply #7 on: November 05, 2020, 05:03:08 PM »

That looks like ash.
Logged
Poker work DG.
Pariselle 2.6 DG, Ex-Club IIIBS CF,
Matching Liliputs in CF and DG,
Lots of sickly Hohners needing TLC,
Bassoon, Various Bagpipes........

CAB

  • Mass Debater
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1147
    • Somerset Russets Village Band
Re: Older Castagnari fingerboard fixing/s
« Reply #8 on: November 05, 2020, 05:21:38 PM »

I still have the photocopied catalogue from when I bought mine from Marcus (ultimately, through Rees, I believe) in 1986.  It states that the wood was  castagno/chataigne, ie chestnut.  Haven't seen mine for a long time - it was pinched eventually - but the photo looks familiar so maybe it is the same timber on yours.

Edited to add photo.
« Last Edit: November 05, 2020, 05:50:39 PM by CAB »
Logged
Pas de lieu Rhone que nous

melodeon

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1732
Re: Older Castagnari fingerboard fixing/s
« Reply #9 on: November 05, 2020, 06:22:23 PM »

I was advised by Castagnari some years back that  they extensively used ELM.
Logged

Squeaky Pete

  • Squeaky Pete
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1327
  • Re-hohn a Hohner
Re: Older Castagnari fingerboard fixing/s
« Reply #10 on: November 05, 2020, 07:55:39 PM »

Ok if chestnut is being thrown into the ring, I'll change my mind and vote chestnut instead of ash.
I used to use it a lot in the 80s and I'd forgotten how nice it can look. Nice smell when to cut it too.
Logged
Poker work DG.
Pariselle 2.6 DG, Ex-Club IIIBS CF,
Matching Liliputs in CF and DG,
Lots of sickly Hohners needing TLC,
Bassoon, Various Bagpipes........

playandteach

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3526
  • Currently a music teacher in a high school.
Re: Older Castagnari fingerboard fixing/s
« Reply #11 on: November 05, 2020, 10:50:23 PM »

Nice looking box whatever it is.
Logged
Serafini R2D2 GC, Serafini GC accs 18 bass

Nigel.H

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 586
Re: Older Castagnari fingerboard fixing/s
« Reply #12 on: November 06, 2020, 02:52:42 PM »

The woodwork is done.....I am waiting on some material to replace the grille 'gauze/mull'.  I hope to "culture" something spectacular from the ale/soup/tea stains on the old one  :o ;)
Logged

Nigel.H

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 586
Re: Older Castagnari fingerboard fixing/s
« Reply #13 on: November 11, 2020, 10:40:08 PM »

I have finished the re-fresh and repair's, thanks as always for the advice.   

Logged

rees

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5055
  • Windjammer
    • Wesson Accordions
Re: Older Castagnari fingerboard fixing/s
« Reply #14 on: November 12, 2020, 09:49:32 AM »

Nice work.
Logged
Rees Wesson (accordion builder and mechanic)
Gungrog, Welshpool, Wales, UK
www.melodeons.com

Stotty

  • Stotty
  • Regular debater
  • ***
  • Offline Offline
  • Posts: 191
Re: Older Castagnari fingerboard fixing/s
« Reply #15 on: November 12, 2020, 10:26:06 AM »

I agree, an extremely neat job! How did you cut the rebate/groove so neatly?
Logged

Tone Dumb Greg

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4955
    • Dartmoor Border Morris
Re: Older Castagnari fingerboard fixing/s
« Reply #16 on: November 12, 2020, 01:14:42 PM »

I have finished the re-fresh and repair's, thanks as always for the advice.

That's a very good job. Impressive.

What timber did you go for, in the end?
Logged
Greg Smith
DG/GC Pokerwork, DG 2.4 Saltarelle, pre-war CF Hohner, Hohner 1040 Vienna style, old  BbEb Hohner that needs a lot of work.

ACCORDION, n. An instrument in harmony with the sentiments of an assassin. Ambrose Bierce

Nigel.H

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 586
Re: Older Castagnari fingerboard fixing/s
« Reply #17 on: November 12, 2020, 01:18:12 PM »

How did you cut the rebate/groove so neatly?
The top edge of the case was done with a hand-router, to just short of the corner and finished with a chisel so as to keep the side edges intact.  The front / upper edge of the finger-board with a table-router.  Very fine passes until the damaged areas were 'lost'.

The inset is a 'modern' marketed Mahogany I had from another job, which is almost certainly a variant of Sapele, but it "works" well and is hard without being too hard.
Logged
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal