Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Superior accordion internals!  (Read 3713 times)

0 Members and 1 Guest are viewing this topic.

Ted

  • Good talker
  • **
  • Offline Offline
  • Posts: 62
Superior accordion internals!
« on: October 07, 2009, 03:10:25 PM »

I just posted pix of a Superior button accordion. It was one of Ma McNulty's boxes, this one in 'C'. The internal construction is shown for those interested in comparing it to a Baldoni or other older instruments. The receipt for this from Frank Umbriaco's shop is dated 1940 - see the Superior story so far, all on www.tedmcgraw.com under button accordions. As these instrumnets seem to be extreemly rare and claimed to have been made in NY, I'd love to hear comments from the experts out there who know so much more about these things than I do - many thanks!
Ted
Logged

pgroff

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1827
Re: Superior accordion internals!
« Reply #1 on: October 07, 2009, 09:06:07 PM »

Hi Ted,

Thanks for another great photo-essay on your website.

First reactions:

Interesting set-up, 6 voices, no switch.... from you I understand that the voices are LMMMMH. That is what you might often find in a 1940s Baldoni Bartoli, whereas the O'Byrne Dewitt Baldonis and Walters 6 voice boxes often (in my experience) seem to double up the bassoon (L) reed rather than add the piccolo. Exceptions occur of course. It must sound great in C (vs the higher D or C# rows I usually encounter in the one, one and a half, or two row Irish-American boxes).

I would predict it is pitched an average of A 445 - 447, based on similar 1940s boxes I have seen, unless it was retuned in later years.

Very unusual to have an all-wooden soundboard on one of these. Together with the C tonality, I would expect this to generate a much less "crashy" or "noisy" sound than typical for a Baldoni or Walters.... of course the degree of musette in the tuning ("wetness"), the design and materials of the grille, and the nature of the grillecloth also interact to influence that characteristic. It should be understood when I talk about a "crashy" sound (think "crash cymbal") in one of these, it is not a criticism. I like a good warm, purer sound from a melodeon also, that you can get from a wooden-soundboard box, but the complex tone quality from the aluminum-soundboard Irish American boxes, like a breathy, puffy, flute timbre, has its own power and beauty. So when this one is working really well, it will be interesting to listen to its voice. Maybe it was intended to be a little mellower than the average NY city 6 voice box!

I note that the holes in the soundboard of that Superior are not separate for the two banks of reeds mounted on one reedblock. In my experience this is not usually the case in Walters and Baldonis, but I have seen it in some great sounding accordions and it doubtless influences the way those paired banks of reeds on each block interact.

It would be very interesting to compare that Superior with the Walters made for the late Tommy Gallagher of Philadelphia. When I get a chance I will try to post pics of that 1-row box, which IIRC is from around 1948 or so and probably also NY-made. Like the Superior, the Gallagher box is also a no-switch one-row, but a 4-voice in D (LMMM) with aluminum soundboard. The soundboard, like many Walters, is "predrilled" so that an extra reedblock could be added.... like the slots in computers that give you an option to add another circuit board... So I could easily make it a 6-voice, but have never wanted to. It is plenty wet and pitched very high (tuning original) and gives another take on what Irish musicians wanted then. Like the McNulty Superior, the casework is big almost to seeming oversize, but that gives amazing air supply (along with the design of the airways, seemingly a Walters specialty) and the lightness of weight is surprising. When you get used to the dimensions, it seems to float and move pretty well.

PG




« Last Edit: October 07, 2009, 09:12:34 PM by pgroff »
Logged

Lars

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 797
Re: Superior accordion internals!
« Reply #2 on: October 11, 2009, 07:15:32 PM »

Paul,

I've seen the "one hole for two reeds" feature on both a Walters, and on two baldonis owned by members of this forum - all aluminium soundboard 30's melodeons.

That "fuffin-puffin-crashcymbal sound" is what I like to call the "30's sound". It's very lovely, and it's very caracteristic. I've seen and heard it off both wooden and alu soundboard boxes - the thing in common with all the boxes was the cabinet made of thin plywood covered in a thick single layer of hard celluloid.
Logged

pgroff

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1827
Re: Superior accordion internals!
« Reply #3 on: October 11, 2009, 08:21:18 PM »

Paul,

I've seen the "one hole for two reeds" feature on both a Walters, and on two baldonis owned by members of this forum - all aluminium soundboard 30's melodeons.



Lars,

Right you are, that does occur, my point being I haven't *usually* seen it..... based on my (very fallible!) memory, that is. Maybe I am wrong about it being unusual or even the minority condition. Unfortunately for this question, I recently traded away quite a number of Walters and Baldoni boxes, working and projects, so I don't have a good sample size here to check today.

But the two early black Baldonis below do have one hole drilled through the board per each reedblock, as you describe and as Ted shows for the McNulty C Superior. However the two early Walters shown below, plus the Gallagher Walters I showed above, have two holes drilled in the soundboard per each reedblock. So that's 3 to 2 in a sample of 5 relatively early aluminum board Irish-American boxes :-)

PG

Lars also wrote: "That "fuffin-puffin-crashcymbal sound" is what I like to call the "30's sound". It's very lovely, and it's very caracteristic. I've seen and heard it off both wooden and alu soundboard boxes - the thing in common with all the boxes was the cabinet made of thin plywood covered in a thick single layer of hard celluloid."

Lars,

Interesting, you must have made quite a study of this. I associate that sound with the aluminum soundboard and similar boxes I have had that lack the aluminum didn't seem to have it. Finally, there is a lot of variation from box to box and without doing scary experiments on pieces of history it might be hard to tease apart the source of certain sounds.  I do agree that a bright, hissy sound can come out of some of the early Italian-made instruments with wooden soundboards (pallet-boards) and here I have usually related that to the short-scale handmade reeds, aluminum grilles, etc. But I will keep an open mind and an open ear as I study more of these myself.

Thanks a million for your very interesting observations, I love to be corrected when I have understood something incorrectly!

PG

« Last Edit: October 11, 2009, 08:32:50 PM by pgroff »
Logged

Lars

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 797
Re: Superior accordion internals!
« Reply #4 on: October 11, 2009, 09:00:00 PM »

Paul:

I'm not talking much about "clear" sound (as in: ' a grey paolo sounds more clear than a red paolo' etc), but more the "huffin-puffin" crisp sound when discussing 30's sound. My experice with that sound comes from a celluloid covered Globe Gold Medal Proffessional 6 voice, 1930's paolo sopranis, and 1930's Baldonis/Walters. I recently restored this BIG 4 voice paolo:

http://www.flickr.com/photos/21478603@N06/3839783755/

I changed the reeds, and used new Binci long-scale reeds. I STILL had that 30's sound, but only when reaching the sweet-spot of about 10 cents where it started to open up. Thus, the reeds had no influence since the originals were replaced. It also did not affect that sound when removing the metal grille.

Now, when comparing to the paolo sopranis of the 20's, a lot of things are in common. Same wood, same dimention and material reedblocks, same mechanism, same pallets, and same type of new reeds retro-fittet. The only difference is the thick single layer of celluloid. Now, the 20's has a very clear sound (cuts more in a session), but regardless of the amount of tremolo, it does NOT have that puffin' sound...

Have you seen that big walters you posted a picture of in real life? I saw it on eBay and was quite impressed by the size. Must be a massive beast! It would be nice to know how many sets of reeds it's got.
Logged

pgroff

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1827
Re: Superior accordion internals!
« Reply #5 on: October 11, 2009, 09:51:46 PM »

Hi Lars,

The Walters with the gold celluloid grille is not so big, from its dimensions. The buttons are smaller than on the Madden box, and closer together. The whole box may be a little smaller than the very similar 15 key yellow-pearl Walters shown on Ted McGraw's site (cited above by him), as can be seen from the less-complete pattern of the stamping in the grille on the gold-grille box. I think the gold-grille box is probably very similar to the 4-bass one shown in 1940s photos of the late Johnny Caples from Boston. Sue Gedutis reproduced a pic of that box in "See you at the Hall." The gold grille box is LMMM, four holes for each pallet, direct-opening pallet levers. Internal pencilled number "2" in several places, but unlike some other early aluminum-board Walters, no number stamped on the soundboard.

PG
« Last Edit: October 18, 2009, 09:01:04 AM by pgroff »
Logged

Ted

  • Good talker
  • **
  • Offline Offline
  • Posts: 62
Re: Superior accordion internals!
« Reply #6 on: October 13, 2009, 02:45:25 AM »

Thanks to all for the comments! Here is the bottom of the reed block showing the elongated holes and the chamber separator, which does not come all the way to meet the bottom plate of the block.

Logged

Keithypete.

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 917
Re: Superior accordion internals!
« Reply #7 on: October 16, 2009, 01:48:23 PM »

Sorry if this is thread-drift, but I'm intrigued as to how the 'single layer of hard celluloid' was applied to the 'thin plywood cabinet'. was it sprayed on? Are the same techniques used today, how would you touch it up or repair chips?
Logged
Beltuna Sara II - B/C flavour.
Borsini - G,D,A.
Pokerwork B/C.
PRIMATONA IV, B/C.
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal