Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1] 2 3   Go Down

Author Topic: Yes, but what are the stops doing on the treble side?  (Read 4301 times)

0 Members and 1 Guest are viewing this topic.

Little Eggy

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 843
Yes, but what are the stops doing on the treble side?
« on: November 09, 2020, 03:27:04 PM »

I'm showing my musical ignorance here, but I've tried a few searches and can't find what I'm looking for.

On my Maestro (a Serenellini) I have three stops on the treble side. 

I can obviously hear the difference between the numerous options for each one in combination with the others.

I've read stuff about 'removing the thirds' which I partly understand.

I'm attaching a link to a little video of me playing a note with the stops in and out.

https://youtu.be/jZgho0_J7d0

First question is 'Is my box actually working correctly because some of the options sound very similar?"

Second question is "What is actually happening under each of the options?"

When I play I normally play it with Stop number 1 out and the other two, in.  OR I play with none of them out to get a fuller sound.

All comments welcome....
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Yes, but what are the stops doing on the treble side?
« Reply #1 on: November 09, 2020, 03:35:14 PM »

3 stops 3 banks of reeds.  One stop controls each bank of reeds.

When the stops are up the reeds for that stop are switched off.

No 1 stop is an octave below the other two. 

2 and 3 both play at the same pitch except there will be a slight difference between them to give a tremolo.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

rees

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5055
  • Windjammer
    • Wesson Accordions
Re: Yes, but what are the stops doing on the treble side?
« Reply #2 on: November 09, 2020, 04:04:24 PM »

A stop to remove the thirds will be on the left hand side of the instrument. It removes the thirds from the chords.
Logged
Rees Wesson (accordion builder and mechanic)
Gungrog, Welshpool, Wales, UK
www.melodeons.com

BobM

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 310
Re: Yes, but what are the stops doing on the treble side?
« Reply #3 on: November 09, 2020, 04:10:44 PM »

1 is the low reed in tune set, 2 the detuned high set, and 3 the in tune high set. Apart from the fact that you could use any of them on their own, 2 and 3 is a high light tremolo, 1 and 3 is an octave unison in tune, and 1 and 2 an octave unison detuned.

Corrected..
« Last Edit: November 09, 2020, 10:22:01 PM by BobM »
Logged

Little Eggy

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 843
Re: Yes, but what are the stops doing on the treble side?
« Reply #4 on: November 09, 2020, 07:25:14 PM »

3 stops 3 banks of reeds.  One stop controls each bank of reeds.

When the stops are up the reeds for that stop are switched off.

No 1 stop is an octave below the other two. 

2 and 3 both play at the same pitch except there will be a slight difference between them to give a tremolo.

Thanks for a perfect, concise answer.
Logged

Little Eggy

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 843
Re: Yes, but what are the stops doing on the treble side?
« Reply #5 on: November 09, 2020, 07:27:40 PM »

A stop to remove the thirds will be on the left hand side of the instrument. It removes the thirds from the chords.

Thank you.  I have one of those too!  I think the issue of when to play with/without thirds
is probably beyond me!  Thanks again.
Logged

Little Eggy

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 843
Re: Yes, but what are the stops doing on the treble side?
« Reply #6 on: November 09, 2020, 07:29:42 PM »

1 is the low reed in tune set, 2 the detuned high set, and 3 the in tune high set. Apart from the fact that you could use any of them on their own, 2 and 3 is a high light tremolo, 1 and 3 is an octave unison in tune, and 1 and 3 an octave unison detuned.

That’s very helpful.  High light tremolo sounds like an option I should use more frequently.
Logged

rees

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5055
  • Windjammer
    • Wesson Accordions
Re: Yes, but what are the stops doing on the treble side?
« Reply #7 on: November 09, 2020, 08:45:39 PM »

A stop to remove the thirds will be on the left hand side of the instrument. It removes the thirds from the chords.

Thank you.  I have one of those too!  I think the issue of when to play with/without thirds
is probably beyond me!  Thanks again.

Use whichever you think sounds best at the time, there are no rules.
Logged
Rees Wesson (accordion builder and mechanic)
Gungrog, Welshpool, Wales, UK
www.melodeons.com

Thrupenny Bit

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 7232
  • happily squeezing away in Devon
Re: Yes, but what are the stops doing on the treble side?
« Reply #8 on: November 09, 2020, 08:50:09 PM »

The left hand chord is usually made up of a root, 3rd interval and 5th interval.
G major chord notes = G - B - D
The 'thirds stop' takes out the third note, the 'B' note therefore leaving/playing an 'open' G chord of G - - D.

You can replicate this by playing on the treble side the notes G-B-D.
The 'G' being the start of your scale on the DG box, top row, 3rd or 4th button in depending on 3rd or 4th button start!
Place your finger on the start button G row, and then touch the next two buttons long that row
Hold those buttons down, push steadily, that's a G chord.
Then add/take off the finger holding the B button down. That is what your stop is doing by adding/removing the third note of the chord.
That is then true of the other chords you have on the left hand.

In some instances when playing, the third can clash a bit and so people will use the stop to remove the third in the chord.
Some others prefer the open lighter sound of the thirdless chord.

As a general rule, I keep my thirds in as I prefer the fuller sound.
My very good friend locally *always* uses the stop to remove his thirds.
That's a general thing coming down to taste really, our preferences with no musical reason behind it.
Hope that helps!
Q

...as Rees says, preference, no rules!

Logged
Thrupenny Bit

I think I'm starting to get most of the notes in roughly the right order...... sometimes!

Anahata

  • This mind intentionally left blank
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 6767
  • Oakwood D/G, C/F Club, 1-rows in C,D,G
    • Treewind Music
Re: Yes, but what are the stops doing on the treble side?
« Reply #9 on: November 09, 2020, 11:19:14 PM »

I mostly take the thirds out to make the LH end quieter,  so I can play sustained chords (actually only fifths with the thirds out) without drowning the treble side, usually accompanying a slow tune.

Less frequently I need to take out the thirds to avoid a clash because I'm playing in B minor and the melodeon's complete B chord is B major.

Thirds in for bouncy dance music where the LH style is more percussive.
Logged
Слава Україні !
Music recording and web hosting: www.treewind.co.uk
Mary Humphreys and Anahata: www.maryanahata.co.uk
Ceilidh band: www.barleycoteband.co.uk

Stotty

  • Stotty
  • Regular debater
  • ***
  • Offline Offline
  • Posts: 191
Re: Yes, but what are the stops doing on the treble side?
« Reply #10 on: November 09, 2020, 11:44:33 PM »

The 3 stop arrangement on the 3 voice Serenellinid is, as far as I know, the same as on the Saltarelle Nuage, and I particularly like the "richness" of the lower L single voice on the RH side for some slow airs.

Perhaps it is not surprising, given the Saltarelle apparent "quality" inconsistencies, that on some Nuages the low voice stop is the one nearest the player, and on others it is the stop furthest from the player!
« Last Edit: November 10, 2020, 04:35:50 AM by Stotty »
Logged

BobM

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 310
Re: Yes, but what are the stops doing on the treble side?
« Reply #11 on: November 10, 2020, 09:37:46 AM »

On a three row, typically are there three register controls?
Logged

Anahata

  • This mind intentionally left blank
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 6767
  • Oakwood D/G, C/F Club, 1-rows in C,D,G
    • Treewind Music
Re: Yes, but what are the stops doing on the treble side?
« Reply #12 on: November 10, 2020, 10:24:11 AM »

It has nothing to do with the number of rows, only the number of voices (reeds) per note.

On a three voice box, you can have a full control of each voice as on the one described above.
Alternatively you can sometimes have just one stop, which turns on and off the low reed, leaving the higher pair of reeds in tremolo tuning permanently on.
Logged
Слава Україні !
Music recording and web hosting: www.treewind.co.uk
Mary Humphreys and Anahata: www.maryanahata.co.uk
Ceilidh band: www.barleycoteband.co.uk

Rob2Hook

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2278
  • Castagnaris, Hohners & Baffetti
Re: Yes, but what are the stops doing on the treble side?
« Reply #13 on: November 10, 2020, 11:10:12 AM »

Not wishing to confuse things, but there are other options fitted to different models.  For example, my Castagnari 1914 is a three voice, tuned LMM+.  There are two "toggle switches" set into the grille one cuts the L (low voice) and the other cuts the M+ (tremolo voice).  On the bass end, there are "automatic couplers", a set of four push buttons, which offer all combinations of the options from full sound or with the fundamental bass cut or thirds cut.

Rob.
Logged

Anahata

  • This mind intentionally left blank
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 6767
  • Oakwood D/G, C/F Club, 1-rows in C,D,G
    • Treewind Music
Re: Yes, but what are the stops doing on the treble side?
« Reply #14 on: November 10, 2020, 01:15:36 PM »

Aha - I wondered if any were made with stops on L and M+ but not M. I've not knowingly seen one.
I've certainly see the 4 button bass coupler system.
Logged
Слава Україні !
Music recording and web hosting: www.treewind.co.uk
Mary Humphreys and Anahata: www.maryanahata.co.uk
Ceilidh band: www.barleycoteband.co.uk

Thrupenny Bit

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 7232
  • happily squeezing away in Devon
Re: Yes, but what are the stops doing on the treble side?
« Reply #15 on: November 10, 2020, 01:28:32 PM »

The grill switches Rob describes are also on the Hascy too.
They work well.
It gives the right hand treble voice options of M, MM, LMM or LM.

Logged
Thrupenny Bit

I think I'm starting to get most of the notes in roughly the right order...... sometimes!

Chris Marriott

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1048
Re: Yes, but what are the stops doing on the treble side?
« Reply #16 on: November 10, 2020, 02:31:34 PM »

Aha - I wondered if any were made with stops on L and M+ but not M. I've not knowingly seen one.
I've certainly see the 4 button bass coupler system.

Seems to be quite common for melodeons to have switches to turn each reed bank on and off individually, so three switches for three voices. On accordions it's far more common to have "couplers" which select various combinations of reed banks. Eg I have a three voice (LMM) accordion and have five couplers to select various combinations (L, LM, LMM, MM, and M).
« Last Edit: November 10, 2020, 02:33:21 PM by Chris Marriott »
Logged
Chris

Castagnari Mory, English Concertina and Piano Accordion.

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: Yes, but what are the stops doing on the treble side?
« Reply #17 on: November 10, 2020, 02:49:41 PM »

I'm showing my musical ignorance here, but I've tried a few searches and can't find what I'm looking for.

On my Maestro (a Serenellini) I have three stops on the treble side. 

I can obviously hear the difference between the numerous options for each one in combination with the others.

I've read stuff about 'removing the thirds' which I partly understand.

I'm attaching a link to a little video of me playing a note with the stops in and out.

https://youtu.be/jZgho0_J7d0

First question is 'Is my box actually working correctly because some of the options sound very similar?"

Second question is "What is actually happening under each of the options?"

When I play I normally play it with Stop number 1 out and the other two, in.  OR I play with none of them out to get a fuller sound.

All comments welcome....

OK - I've been lisening to your youtube video with my Peterson tuner turned on. Here's my verdict.

Inside the RH side of your instrument you will have three reed blocks.
One is for the low octave voice reeds, designated L, which play an octave lower than the other two sets of reeds.
The second and third reed blocks will be for the medium pitch reeds, designated M and M+. The M reeds will (should) be tuned 'at pitch' and the M+ reeds will normally be tuned slightly sharp to give you the tremolo effect when M and M+ are sounded together.

Regarding the stops: Firstly, all the stops are activated when they are in the down position. Pulling them up mutes the set of reeds controlled by that stop.

Numbering the stops according to your system:
Stop 1 is nearest your body; Stop 2 in the middle; Stop 3 is furthest from your body.

Stop 1 controls the L reeds: down to engage those reeds, up to mute them.
Stop 2 controls the tremolo, sharp-tuned, M+ reeds: down = engaged, up = muted.
Stop 3 controls the 'at pitch' M reeds: down = engaged, up = muted.

Stops 2 and 3 engaged together gives you the M M+ tremolo sound. Very commonly used.

Stops 1, 2 and 3 engaged togther, gives you the rich full Monty: L M M+ sound; again very commonly used.

Stops 1 and 3 engaged together should give you L and M sounding together. If the instrument is in tune (I suspect it isn't, at least on the buttons you were playing), these reds should be sounding an exact octave apart. This is often known as the 'bandoneon' sound and can be very effective in quieter slow music.

Stop 1 engaged on its own gives you the L sound, sometimes known as the 'bassoon' setting.

Stop 3 engaged on its own gives you the M sound, sometimes known as the 'flute' or 'concertina' setting. Again, useful in quieter slow airs.

Stops 1 and 2 engaged together gives you the L and M+ sound. Not quite an octave unison and often with an unpleasant tremolo. Not often used, if at all, but I guess it's a matter of personal taste.

As for the tuning of your particular instrument, you are playing the notes G push and A pull. The A pull, particularly on the Stop 3 M voice, is sounding very flat and it needs tuning. If the rest of your instrument needs tuning too, it could be one reason why you are finding it hard to notice the difference between the various stops. I would recommend that you get the tuning of your box checked by one of the fettlers on this forum and retuned as necessary.

 

Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

Little Eggy

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 843
Re: Yes, but what are the stops doing on the treble side?
« Reply #18 on: November 10, 2020, 03:04:24 PM »


Thirds in for bouncy dance music where the LH style is more percussive.

When you say 'thirds in' do you mean stop in/down therefore thirds turned on? I presume so.

It's odd because when you say 'pull out all the stops' in normal conversation it implies turning everything on, doesn't it?
If you pull out all the stops on the treble side of a melodeon the result is silence.

If a stop is In or Down it's turning something ON
If a stop is Out or Up it's turning something OFF

I think I need to go in a darkened room ..............
Logged

Gonk

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 507
  • (Mudlark Music)
    • Mudlark Music
Re: Yes, but what are the stops doing on the treble side?
« Reply #19 on: November 10, 2020, 03:06:07 PM »

If a stop is In or Down it's turning something ON
If a stop is Out or Up it's turning something OFF

Just a quick note to say I have boxes with the stops that work in the reverse: up is open, down is closed.
Logged
Mudlark Music - restoration, repairs, lessons, and sales.  (USA)  http://mudlark-music.com
Pages: [1] 2 3   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal