Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1] 2 3 4   Go Down

Author Topic: Tool Kit for melodeons  (Read 6067 times)

0 Members and 1 Guest are viewing this topic.

Tone Dumb Greg

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4955
    • Dartmoor Border Morris
Tool Kit for melodeons
« on: November 13, 2020, 06:05:33 PM »

What items would you include in a Tool Kit dedicated to melodeon repair?
Including modified standard tools...such as a notched pair of end cutters for removing bellows pins.
Logged
Greg Smith
DG/GC Pokerwork, DG 2.4 Saltarelle, pre-war CF Hohner, Hohner 1040 Vienna style, old  BbEb Hohner that needs a lot of work.

ACCORDION, n. An instrument in harmony with the sentiments of an assassin. Ambrose Bierce

ronald bullen

  • New Starter
  • Offline Offline
  • Posts: 2
Re: Tool Kit for melodeons
« Reply #1 on: November 13, 2020, 06:19:34 PM »

Telephone number of local fettler
Ron
Logged

Tone Dumb Greg

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4955
    • Dartmoor Border Morris
Re: Tool Kit for melodeons
« Reply #2 on: November 13, 2020, 06:20:49 PM »

Telephone number of local fettler
Ron

 :D
I have that already!
Logged
Greg Smith
DG/GC Pokerwork, DG 2.4 Saltarelle, pre-war CF Hohner, Hohner 1040 Vienna style, old  BbEb Hohner that needs a lot of work.

ACCORDION, n. An instrument in harmony with the sentiments of an assassin. Ambrose Bierce

Thrupenny Bit

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 7232
  • happily squeezing away in Devon
Re: Tool Kit for melodeons
« Reply #3 on: November 13, 2020, 06:39:02 PM »

I have a small piece of 2x1" batton, about 2" long.
I've drilled holes in it 'bellows pin size' and sketched the bellows onto it.
I remember several fettlers here saying that with Italian boxes ( my Castagnaris ) you should endevor to put the bellows pin back in the same hole it came out of.
My bit of wood helps me to do this!
Logged
Thrupenny Bit

I think I'm starting to get most of the notes in roughly the right order...... sometimes!

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: Tool Kit for melodeons
« Reply #4 on: November 13, 2020, 06:49:32 PM »

A reed pinger.
Small screwdrivers various
Scalpel
Small standard screwdriver with slot cut in blade to use as a spring tool

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: Tool Kit for melodeons
« Reply #5 on: November 13, 2020, 06:50:36 PM »

I have a small piece of 2x1" batton, about 2" long.
I've drilled holes in it 'bellows pin size' and sketched the bellows onto it.
I remember several fettlers here saying that with Italian boxes ( my Castagnaris ) you should endevor to put the bellows pin back in the same hole it came out of.
My bit of wood helps me to do this!
Very true. Italian bellows pins can vary fractionally in the diameter, even on the same instrument.
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

John MacKenzie (Cugiok)

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2360
  • Fettling... Learning to reed and right.
Re: Tool Kit for melodeons
« Reply #6 on: November 13, 2020, 07:07:31 PM »

Elastic bands, to jury rig broken springs

SJ
Logged
There is no beginning to my talent :)



: Hohner Club Modell 1. Bb/Eb, de-clubbed : Early Hohner Pressed Wood A/D : 1930's Varnished wood G/C:  Hohner Erika C/F: Bandoneon tuned D/G Pressed wood: Koch F/Bb; G/C Pre Corso

Rob2Hook

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2278
  • Castagnaris, Hohners & Baffetti
Re: Tool Kit for melodeons
« Reply #7 on: November 13, 2020, 07:13:27 PM »

A Small crotchet hook with a notch filed into the back of the head.  One side for pulling springs, the other t push them.

The length of any list will depend on how far you want to go into repairs.  Most field repairs can be done with little more than a Swiss Army knife, but on the bench the tool kit can be quite large and with many different tools for the same job, depending on personal preference.

Rob.
Logged

Pearse Rossa

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 723
Re: Tool Kit for melodeons
« Reply #8 on: November 13, 2020, 07:18:18 PM »

A toothbrush and a magnet.
Logged

Tone Dumb Greg

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4955
    • Dartmoor Border Morris
Re: Tool Kit for melodeons
« Reply #9 on: November 13, 2020, 08:28:45 PM »

A reed pinger.

What do you use

Quote
Small standard screwdriver with slot cut in blade to use as a spring tool

Is this better than a set of spring hooks?

Logged
Greg Smith
DG/GC Pokerwork, DG 2.4 Saltarelle, pre-war CF Hohner, Hohner 1040 Vienna style, old  BbEb Hohner that needs a lot of work.

ACCORDION, n. An instrument in harmony with the sentiments of an assassin. Ambrose Bierce

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: Tool Kit for melodeons
« Reply #10 on: November 13, 2020, 08:37:00 PM »


A reed pinger.


What do you use

Quote

Small standard screwdriver with slot cut in blade to use as a spring tool


Is this better than a set of spring hooks?



For reed pingers I buy brass sheet off ebay and cut them out, need to go to the shed to measure how thick it was


As to the spring tool you can see what I'm talking about here
https://youtu.be/5st25y_0wEY?t=431

boxcall

  • You got to love it!!!
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1801
Re: Tool Kit for melodeons
« Reply #11 on: November 13, 2020, 08:50:29 PM »

A reed pinger.

What do you use

Quote
Small standard screwdriver with slot cut in blade to use as a spring tool


Is this better than a set of spring hooks?
I was just doing this job and releasing was easy enough with a small screwdriver, this didn’t work as well putting them back on ( Lester’s blade would work much better and so would a small stick of wood with a notch), I ended up using my fingers and had no problem putting them back on a Hohner one row.
Probably a bit tighter on a two row to start so I wouldn’t be able to do this with my fingers?

Edit to add : you need patience  ;)
Logged
Hohner 1040 C, Beltuna one row four stop D, O'Byrne Dewitt/ Baldoni bros. D/C#, Paolo soprani "pepperpot" one row D

Tone Dumb Greg

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4955
    • Dartmoor Border Morris
Re: Tool Kit for melodeons
« Reply #12 on: November 13, 2020, 08:57:46 PM »


The length of any list will depend on how far you want to go into repairs.  Most field repairs can be done with little more than a Swiss Army knife, but on the bench the tool kit can be quite large and with many different tools for the same job, depending on personal preference.

Rob.

The essential standard tool kit is of interest but I am most interested in tools adapted for and tools specifically designed and made for doing work on melodeons. All part of, but not all of, what I would call knacks.

Actually, I'm also interested in the other aspect of knacks: Ways of doing things that make a hard job easy. For instance, I worked as a TV engineer for about eight years. They were notorious for being full of screws in hard to locate positions. While some fixings  were steel and all you had to was magnetise the screwdriver, others were non-ferrous. Special grips on screwdrivers were commercially available, but I always managed to lose these. They were useless anyway, half the time. One trick that helped was wrap a bit of solder around the end of the screwdriver and the screw,  holding it on the blade while it was located. Another favourite was to gather a bit of ear wax on the blade and press the screw into it, holding it for location. Gross, but it worked a treat.

It was Steve D's suggestion of sliding a bit of wire in as you withdraw a shaft, when replacing springs, to keep the assembly intact that put me in mind of this. Little things that make life easy.
Logged
Greg Smith
DG/GC Pokerwork, DG 2.4 Saltarelle, pre-war CF Hohner, Hohner 1040 Vienna style, old  BbEb Hohner that needs a lot of work.

ACCORDION, n. An instrument in harmony with the sentiments of an assassin. Ambrose Bierce

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Tool Kit for melodeons
« Reply #13 on: November 13, 2020, 09:04:31 PM »


 Another favourite was to gather a bit of ear wax on the blade and press the screw into it, holding it for location. Gross, but it worked a treat.


Gross indeed.

You will have some spare reed wax in your toolkit, scrape a bit of that onto the tip of the screwdriver and the screw will hold nicely.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Peadar

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2039
Re: Tool Kit for melodeons
« Reply #14 on: November 13, 2020, 09:13:52 PM »


 Another favourite was to gather a bit of ear wax on the blade and press the screw into it, holding it for location. Gross, but it worked a treat.


Gross indeed.

You will have some spare reed wax in your toolkit, scrape a bit of that onto the tip of the screwdriver and the screw will hold nicely.
No worse than spitting on a drill bit to stop it overheating.
Logged

Thrupenny Bit

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 7232
  • happily squeezing away in Devon
Re: Tool Kit for melodeons
« Reply #15 on: November 13, 2020, 09:19:20 PM »

Earwax .... and a bit if a pain if you don't produce it  ::)
Logged
Thrupenny Bit

I think I'm starting to get most of the notes in roughly the right order...... sometimes!

Pearse Rossa

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 723
Re: Tool Kit for melodeons
« Reply #16 on: November 13, 2020, 09:24:34 PM »

Quote
Another favourite was to gather a bit of ear wax on the blade and press the screw into it, holding it for location.

A small piece of blu tack works well for that job.
Logged

Tone Dumb Greg

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4955
    • Dartmoor Border Morris
Re: Tool Kit for melodeons
« Reply #17 on: November 13, 2020, 09:44:15 PM »

Quote
Another favourite was to gather a bit of ear wax on the blade and press the screw into it, holding it for location.

A small piece of blu tack works well for that job.

Enough ear wax  ;D
Just an example of what I mean by "knack". Like Q's bellow pin block.
Logged
Greg Smith
DG/GC Pokerwork, DG 2.4 Saltarelle, pre-war CF Hohner, Hohner 1040 Vienna style, old  BbEb Hohner that needs a lot of work.

ACCORDION, n. An instrument in harmony with the sentiments of an assassin. Ambrose Bierce

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: Tool Kit for melodeons
« Reply #18 on: November 14, 2020, 12:52:53 AM »

For reed pingers I buy brass sheet off ebay and cut them out, need to go to the shed to measure how thick it was

I use the soft steel from the flattened sides of baked bean tins to make reed steadies (as opposed to reed lifters/pingers). The small tins do not have the reinforcement corrugations, so are better for the job. I cut the steel to size, about 10 cm x 1.5 cm, using old scissors, then smooth the sharp edges with a file, also file the ends nearly to a sharp edge. 

I should say that for reed lifters, I nearly always use the Italian hook type of tool. I can get on with that. Some people can't, and they use the brass or phosphor bronze Hohner-type lifter such as Lester makes/uses. It's a matter of personal choice and what suits you best.

I have two Italian style reed lifter hooks, one large size from Charlie Marshal like the one in the top of this picture, which is good for the large bass reeds. For the smaller reeds (nearly all the others) I use a smaller version, home-made, from a long blue steel saxophone needle spring stuck into a piece of wood dowel as a handle. The needle spring is thin, but strong and springy (as you would expect) and it slides under the reed tongues easily.

Using either the Hohner or the Italian reed lifter takes a bit of practice, but once mastered, becomes very quick and easy.
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: Tool Kit for melodeons
« Reply #19 on: November 14, 2020, 01:07:41 AM »

Files and scratchers:

Charlie Marshall sells reed scratchers here. But I made my own years ago from an old round needle file with the teeth ground away and the end filed down to a cylindrical profile about 10 mm long and about 1 mm dia. The end is then squared off on a diamond plate so that it shows a tiny circle when viewed on end. You don't want a sharp point as this digs into the reed tongue. In use it needs a quick touch-up on the diamond plate to keep it the end flat with sharp perpendicular edges.

For reed files I use fine 400-grit diamond files. They cut very gently and evenly, and last a long time. I use the 400-grit version of these. Cheap as chips, but do the job well and last a long time.
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk
Pages: [1] 2 3 4   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal