Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1] 2   Go Down

Author Topic: Replacing the grille cloth  (Read 2884 times)

0 Members and 1 Guest are viewing this topic.

Chris Marriott

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1048
Replacing the grille cloth
« on: November 14, 2020, 05:13:47 PM »

Following Lester's recommendation in his video I've bought some "Evenweave" embroidery material to replace the grille cloth on my Pokerwork. It's very tough and quite stiff, and looks as if it'll be perfect for the job.

A couple of questions:

1. Should ordinary PVA glue (Copydex) work OK for glueing the cloth to the metal grille on the top of the Pokerwork? I've got some clamps to hold the cloth tight while the glue dries.

2. To take off the base in order to replace the bottom cloth, do I just unscrew the four screws next to the feet (by the bass strap)?

Thanks,

Chris
Logged
Chris

Castagnari Mory, English Concertina and Piano Accordion.

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: Replacing the grille cloth
« Reply #1 on: November 14, 2020, 05:23:42 PM »

I use evostick rather than PVA


Yes just the four screws, sometimes easier to release one end of the bass strap if it is tight

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Replacing the grille cloth
« Reply #2 on: November 14, 2020, 05:24:00 PM »

Copydex is not pva.  Copydex is a latex (rubber emulsion) and is not a good choice.  It deteriorated after a few years exposure to air.  Pva is a much better choice.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Chris Marriott

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1048
Re: Replacing the grille cloth
« Reply #3 on: November 14, 2020, 05:26:54 PM »

Copydex is not pva.  Copydex is a latex (rubber emulsion) and is not a good choice.  It deteriorated after a few years exposure to air.  Pva is a much better choice.

Thanks, Theo. My mistake. I've got some "Gorilla" PVA wood glue. I'll use that instead.

Chris
Logged
Chris

Castagnari Mory, English Concertina and Piano Accordion.

Chris Marriott

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1048
Re: Replacing the grille cloth
« Reply #4 on: November 14, 2020, 05:29:29 PM »

I use evostick rather than PVA


Yes just the four screws, sometimes easier to release one end of the bass strap if it is tight

Thanks, Lester!

Chris
Logged
Chris

Castagnari Mory, English Concertina and Piano Accordion.

Chris Marriott

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1048
Re: Replacing the grille cloth
« Reply #5 on: November 14, 2020, 06:45:36 PM »

I thought I'd clean the grille with some mild chrome polish before I started replacing the cloth. It was pretty shiny anyway, so I didn't think the polish would do very much, but the amount of dirt that came off was unbelievable. 20+ years accumulated grime, I guess. This was a clean cloth when I started 😁. The grille is an absolute mirror shine now! The chrome edge strips on the casework were just as filthy.

Chris
« Last Edit: November 14, 2020, 07:00:48 PM by Chris Marriott »
Logged
Chris

Castagnari Mory, English Concertina and Piano Accordion.

Tone Dumb Greg

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4955
    • Dartmoor Border Morris
Re: Replacing the grille cloth
« Reply #6 on: November 14, 2020, 07:54:36 PM »

Just wondering, will using chrome cleaner increase the surface energy of the material, making it more difficult to get a good bond?
Logged
Greg Smith
DG/GC Pokerwork, DG 2.4 Saltarelle, pre-war CF Hohner, Hohner 1040 Vienna style, old  BbEb Hohner that needs a lot of work.

ACCORDION, n. An instrument in harmony with the sentiments of an assassin. Ambrose Bierce

Chris Marriott

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1048
Re: Replacing the grille cloth
« Reply #7 on: November 14, 2020, 08:15:12 PM »

Just wondering, will using chrome cleaner increase the surface energy of the material, making it more difficult to get a good bond?

I only cleaned the outside of the grille for that very reason. I think the polish leaves a layer of wax, which is the last thing you want to apply glue to.

Chris
Logged
Chris

Castagnari Mory, English Concertina and Piano Accordion.

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Replacing the grille cloth
« Reply #8 on: November 14, 2020, 08:20:04 PM »

I usually give the whole grill a good clean in hot soapy water, or in the dishwasher.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Chris Marriott

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1048
Re: Replacing the grille cloth
« Reply #9 on: November 14, 2020, 09:44:58 PM »

I think that's worked pretty well. I'll leave it clamped until the morning.

Chris
Logged
Chris

Castagnari Mory, English Concertina and Piano Accordion.

Rog

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2525
  • Repair and tuning in Hants
Re: Replacing the grille cloth
« Reply #10 on: November 15, 2020, 04:09:17 AM »

I use UHU or equivalent (Wilco sell similar in a blue tube but much cheaper). It sets faster than pva.

Chris Marriott

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1048
Re: Replacing the grille cloth
« Reply #11 on: November 15, 2020, 10:38:50 AM »

Job done. I'm very happy with the result, because I really am hopeless at anything practical! Gives me confidence to tackle other jobs now.
« Last Edit: November 15, 2020, 10:41:36 AM by Chris Marriott »
Logged
Chris

Castagnari Mory, English Concertina and Piano Accordion.

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: Replacing the grille cloth
« Reply #12 on: November 15, 2020, 10:50:42 AM »

Looks great! Proper job!  (:)
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

Chris Marriott

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1048
Re: Replacing the grille cloth
« Reply #13 on: November 15, 2020, 11:00:21 AM »

Lester’s suggestion (in his video) of using “Evenweave” fabric, which is really intended for doing embroidery on, was great. It’s ideal for the job, and I’ve only used about 10% of the piece that I bought from Amazon, so lots left over for future grilles (or embroidery 😁). It’s a fraction of the price of the stuff that Charlie Marshall sells.


Logged
Chris

Castagnari Mory, English Concertina and Piano Accordion.

Chris Marriott

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1048
Re: Replacing the grille cloth
« Reply #14 on: November 15, 2020, 12:08:35 PM »

Bass end now, and I'm interested to see that it has a previous owner's name in it 😁. Does anyone know the lady?

Chris
Logged
Chris

Castagnari Mory, English Concertina and Piano Accordion.

Chris Marriott

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1048
Re: Replacing the grille cloth
« Reply #15 on: November 15, 2020, 12:48:16 PM »

Job done - another good result.

I found that two of the four screws holding on the base plate had completely stripped the thread in the wooden blocks they screw into, which I guess is a common issue since it's such soft wood. I put a small amount of PVA on the thread of the screw before I put the screws back in. Does that sound like a reasonable solution?

Chris


Logged
Chris

Castagnari Mory, English Concertina and Piano Accordion.

Chris Marriott

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1048
Re: Replacing the grille cloth
« Reply #16 on: November 15, 2020, 12:50:30 PM »

The inside of the base:
Logged
Chris

Castagnari Mory, English Concertina and Piano Accordion.

Squeaky Pete

  • Squeaky Pete
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1327
  • Re-hohn a Hohner
Re: Replacing the grille cloth
« Reply #17 on: November 15, 2020, 12:53:19 PM »

Looks very good 👍
I wouldn't bother putting the PVA on the screw threads, though it will work. I prefer putting a dob in the holes in the block, more or less filling to the top. As it dries it shrinks back and you can either drive the screw straight in again or pilot it. It will either grab on the set glue, or on the wood fibres that will be strengthened by the PVA.
Logged
Poker work DG.
Pariselle 2.6 DG, Ex-Club IIIBS CF,
Matching Liliputs in CF and DG,
Lots of sickly Hohners needing TLC,
Bassoon, Various Bagpipes........

Chris Marriott

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1048
Re: Replacing the grille cloth
« Reply #18 on: November 15, 2020, 01:03:26 PM »

Looks very good 👍
I wouldn't bother putting the PVA on the screw threads, though it will work. I prefer putting a dob in the holes in the block, more or less filling to the top. As it dries it shrinks back and you can either drive the screw straight in again or pilot it. It will either grab on the set glue, or on the wood fibres that will be strengthened by the PVA.

Thanks, Pete. If it happens again I'll follow your advice.  I've never done any sort of work with wood previously, so it's all a learning experience.

Chris
« Last Edit: November 15, 2020, 01:05:28 PM by Chris Marriott »
Logged
Chris

Castagnari Mory, English Concertina and Piano Accordion.

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: Replacing the grille cloth
« Reply #19 on: November 15, 2020, 02:50:27 PM »

Job done - another good result.

I found that two of the four screws holding on the base plate had completely stripped the thread in the wooden blocks they screw into, which I guess is a common issue since it's such soft wood. I put a small amount of PVA on the thread of the screw before I put the screws back in. Does that sound like a reasonable solution?

Chris


The problem is the screws enter the end grain of the blocks and it's only some softwood or other so they invariably work loose. I usually glue a bit of cocktail stick/match stick in the hole and then screw into that when the glue is dry.
Pages: [1] 2   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal