Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Skewed bellows card cuts  (Read 734 times)

0 Members and 1 Guest are viewing this topic.

Gav Wood

  • Good talker
  • **
  • Offline Offline
  • Posts: 99
Skewed bellows card cuts
« on: November 21, 2020, 09:27:44 PM »

I have not seen this before, so am asking if sensible. For future reference and also to prevent present mistakes.
The first 10mm or so of the bellows card is at 45 degrees, then the rest is at 60 or so to let the leather have the movement.
I am cutting these down from a junker. Is a paolo soprani continental, but so big it is not usable.  Bought off ebay from france for the reeds. The inside of the bellows are also taped, and the folds are large, about 34mm.
So should the card be cut at 45 degrees then the extra cut, or all at the same angle?

Maybe it doesnt matter but not seen it before. Maybe will keep the same for this one, but be useful to know for future.
Also the gussets on this are a lot more pliant than other bellows and do not stretch to taut when at full extension. Not sure either if this means anything.

Opinions welcomed


Gavin
Logged

Nigel.H

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 586
Re: Skewed bellows card cuts
« Reply #1 on: November 21, 2020, 09:58:30 PM »

This at 7mins 30 secs has a new set being cut & chibbled.

https://www.youtube.com/watch?v=6nmUhz7ciwk&list=RDU--Vf99jyTA&index=12
Logged

Gav Wood

  • Good talker
  • **
  • Offline Offline
  • Posts: 99
Re: Skewed bellows card cuts
« Reply #2 on: November 21, 2020, 10:06:02 PM »

Ahh. So best way is to cut to final and nibble. I may need a new tool for that.

Brilliant video, thank you, had not seen it before.

Logged

tirpous

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1403
Re: Skewed bellows card cuts
« Reply #3 on: November 22, 2020, 12:57:59 AM »

Simple (and usual, I think) approach is a single angled cut all the way across.  Maybe not 60° but something more than 45°, to leave room for leather gusset folds.
Logged
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal