Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: P.Fisecco F#/B  (Read 645 times)

0 Members and 1 Guest are viewing this topic.

DCB

  • Member
  • *
  • Offline Offline
  • Posts: 18
  • Morris: Castagnari Tommy D/G, Giordy D/G
P.Fisecco F#/B
« on: December 17, 2020, 11:05:51 PM »

A friend has just got hold of a P.Fisecco button accordion tuned F#/B
The previous owner (whose father had bought it in Italy) got it years ago.
Said it was a bit clonky - turned out to be because the small row of the bass reeds had fallen out!
Anyway, she's glued some obvious ones back in and we're just sorting out quite how it goes.
There are just 6 bass buttons in one line.
Numbering from the chin end the bass notes of these are:
   Push Pull
2 F#    B
4 F#    C#
6 B      F#
the chords on 1 3 5 all seem to be the major chords to go with the even number buttons (although the reeds that have fallen out might make some of them minors??). But puzzled why there's no E to play in the key of B?
Anyone else come across any of these?
And any idea why F#/B?
Logged
Castagnari Tommy D/G, Castagnari Giordy D/G, Dino Baffetti Black Pearl D/G, and a number of other elderly boxes

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: P.Fisecco F#/B
« Reply #1 on: December 18, 2020, 01:45:24 PM »

Said it was a bit clonky - turned out to be because the small row of the bass reeds had fallen out!
Anyway, she's glued some obvious ones back in and we're just sorting out quite how it goes.

Ohhh... I do hope she didn't use glue.  :(
Reed wax, or else screws/nails on gaskets, depending on which method had previously been used, is the proper way to do this. The reed plates need to be removeable to access the underneath side (for maintenance, valve replacement, etc). Glue makes this difficult or (if superglue or epoxy has been used) impossible.
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

DCB

  • Member
  • *
  • Offline Offline
  • Posts: 18
  • Morris: Castagnari Tommy D/G, Giordy D/G
Re: P.Fisecco F#/B
« Reply #2 on: December 18, 2020, 05:39:50 PM »

Said it was a bit clonky - turned out to be because the small row of the bass reeds had fallen out!
Anyway, she's glued some obvious ones back in and we're just sorting out quite how it goes.

Ohhh... I do hope she didn't use glue.  :(
Reed wax, or else screws/nails on gaskets, depending on which method had previously been used, is the proper way to do this. The reed plates need to be removeable to access the underneath side (for maintenance, valve replacement, etc). Glue makes this difficult or (if superglue or epoxy has been used) impossible.

Hi, sorry I should have been clearer - she made up a wax for it after researching how to do that.
Logged
Castagnari Tommy D/G, Castagnari Giordy D/G, Dino Baffetti Black Pearl D/G, and a number of other elderly boxes
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal