Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Painting Treble Grill  (Read 1428 times)

0 Members and 1 Guest are viewing this topic.

Vallenato831

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 201
Painting Treble Grill
« on: December 18, 2020, 02:28:19 AM »

Anyone have experience painting a grill?   What kind of prep work is needed to get the metal surface ready to take on paint?   Mostly worried about the paint flaking off in the future. 
Logged
Corona III x8

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Painting Treble Grill
« Reply #1 on: December 18, 2020, 09:07:09 AM »

I’ve painted lots of old Hohner grills including some that were originally painted silver.  These are the steps I use;

Use paint stripper to remove all old paint
If there is a lot of old glue on the back soak in hot water to soften, or put it in the dishwasher.
Use abrasives to remove all traces of rust
Treat all surfaces with a rust preventive.
Spray with primer
Spray 2 or 3 coats of finish.

Paints are design for use on cars.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Little Eggy

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 843
Re: Painting Treble Grill
« Reply #2 on: December 18, 2020, 10:38:26 AM »

I’ve painted lots of old Hohner grills including some that were originally painted silver.  These are the steps I use;

Use paint stripper to remove all old paint
If there is a lot of old glue on the back soak in hot water to soften, or put it in the dishwasher.
Use abrasives to remove all traces of rust
Treat all surfaces with a rust preventive.
Spray with primer
Spray 2 or 3 coats of finish.

Paints are design for use on cars.


Interesting and helpful as always Theo - I have a Hohner with a grill which is now black.  Does your method work if you go back to silver?  Or does it only work going away from silver.  Personally I think the black looks naff!
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Painting Treble Grill
« Reply #3 on: December 18, 2020, 11:04:46 AM »

If you remove all the old finish down to bare metal and use a primer then you can have whatever colour you want.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Rob2Hook

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2278
  • Castagnaris, Hohners & Baffetti
Re: Painting Treble Grill
« Reply #4 on: December 18, 2020, 11:28:29 AM »

For a silver grille, I'd suggest using a white primer.  This will give the final finish a brighter, lighter hue - no paint is completely opaque.  In the days of cellulose car paints, white primer was used for the lightest colours and for some medium tints some top coat would be mixed in to start getting the even colour required in the finish coat.

Many DIY paint repair jobs never blnded in as in certain lights you could see the "taint" of red lead primer.

Rob.

P.S. Not so sure of my facts with modern acrylic car paints!
Logged

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: Painting Treble Grill
« Reply #5 on: December 18, 2020, 11:31:04 AM »

How about this for an option   (:)
https://www.youtube.com/watch?v=pKuXyeAGzEU

Vallenato831

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 201
Re: Painting Treble Grill
« Reply #6 on: December 18, 2020, 02:32:23 PM »

I’ve painted lots of old Hohner grills including some that were originally painted silver.  These are the steps I use;

Use paint stripper to remove all old paint
If there is a lot of old glue on the back soak in hot water to soften, or put it in the dishwasher.
Use abrasives to remove all traces of rust
Treat all surfaces with a rust preventive.
Spray with primer
Spray 2 or 3 coats of finish.

Paints are design for use on cars.

Would the same instructions apply to a nickel or stainless steel grill?
Logged
Corona III x8

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Painting Treble Grill
« Reply #7 on: December 18, 2020, 02:43:18 PM »

Stainless steel grill should only need to have old paint removed and then polish.
If by nickel do you mean nickel plated then yes the same instructions.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Vallenato831

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 201
Re: Painting Treble Grill
« Reply #8 on: December 18, 2020, 02:44:57 PM »

Stainless steel grill should only need to have old paint removed and then polish.
If by nickel do you mean nickel plated then yes the same instructions.

It hasnt been painted ever.  Still has that shiny stainless/nickel/chrome finish to it.  I'm almost certain it's stainless steel, newer grill from the last 10 years or so. 
Logged
Corona III x8

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Painting Treble Grill
« Reply #9 on: December 18, 2020, 03:05:03 PM »

I do t have any experience painting stainless steel
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Vallenato831

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 201
Re: Painting Treble Grill
« Reply #10 on: December 18, 2020, 03:26:47 PM »

I do t have any experience painting stainless steel

Thanks for all your help, everyone here.    I think I'm going to rough it up a bit with sandpaper, then self-etching primer, then coat color.   Wish me luck   :-\
Logged
Corona III x8

Broadland Boy

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1243
  • Awful noises from Pokerwork, HA114G, BbEb Liliputs
Re: Painting Treble Grill
« Reply #11 on: December 18, 2020, 07:42:40 PM »

I was recently restoring the rather rusted reflectors in my tractor headlights and looked about for the nearest to spray on chrome when I was pointed at a range made by Plastikote aimed at crafters in general, compared to the aerosol silver from Hammerite I had tried previously and been rather disappointed with it covered rapidly and formed a uniform silver coating over both treated rust patches and the remnants of the plastic silvering which I couldn't remove mechanically or chemically, I'm a convert and one or two others I told have been similarly delighted.

Of musical interest the collapsible steel tripod based music stands, one of which I've just had in for repair have a goldish painted finish, following the repair I found they have a shade in the range which matched perfectly (well this one anyway) and the finish is such that from a moderate distance patches of damage sprayed to an almost invisible join, how durable in this environment only time will tell but once dried it appeared at least equal to car rattlecan finishes for hardness.
Logged
Richard A
Venit ventus contrarius ventus egrediente,
Omnes prope quid ventum est circa

boxcall

  • You got to love it!!!
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1801
Re: Painting Treble Grill
« Reply #12 on: December 18, 2020, 08:08:48 PM »

Stainless steel grill should only need to have old paint removed and then polish.
If by nickel do you mean nickel plated then yes the same instructions.
  Still has that shiny stainless/nickel/chrome finish to it.  I'm almost certain it's stainless steel, newer grill from the last 10 years or so.
I doubt stainless, aren’t most Hohner grills plated? Assuming a Hohner?
The 1040 I been just doctoring up has a grill that could use something, polishing has helped but not solve it , as its rusted and pitted very lightly in spots. It’s a rat rod box (ugly but functional) so maybe I should just remove it altogether  (:)

If you can do a before ( so we can see what you have) and after ? , I’d be interested to see the results.
Logged
Hohner 1040 C, Beltuna one row four stop D, O'Byrne Dewitt/ Baldoni bros. D/C#, Paolo soprani "pepperpot" one row D

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Painting Treble Grill
« Reply #13 on: December 18, 2020, 08:24:38 PM »

Pokerwork grills and other bright work have been stainless steel since about the time to reduction moved to China.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Winston Smith

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4066
  • AKA Edward Jennings
    • "Our Luxor B&B" Luxor life, slice by slice.
Re: Painting Treble Grill
« Reply #14 on: December 18, 2020, 08:34:16 PM »

Was that a reduction in price or quality, Theo?
Logged
At last, broken and resigned to accept conformity.
Oh, how I LOVE Big Brother!

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Painting Treble Grill
« Reply #15 on: December 18, 2020, 09:04:51 PM »

No idea. 
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Kimric Smythe

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 712
    • Smythe's Accordion Center
Re: Painting Treble Grill
« Reply #16 on: December 21, 2020, 03:50:46 AM »

I redid a old rusty pokerwork grill with black "wrinkle finish" paint. The effect went well with the old worn body.
 I sanded the grill with fine sandpaper to get rid of the rust ,then just followed the instructions on the can. Really important!
Logged
Smythe's Accordion Center
Pinole, California
Sales and repairs since 1997
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal