Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1] 2   Go Down

Author Topic: Reduce clack of bass buttons on Paolo Soprani  (Read 3176 times)

0 Members and 1 Guest are viewing this topic.

blunderbox

  • Good talker
  • **
  • Offline Offline
  • Posts: 74
Reduce clack of bass buttons on Paolo Soprani
« on: December 23, 2020, 07:39:14 PM »

Any suggestions on the ‘best’ way to reduce clack on the bass buttons for the attached?  I am not worried about the padding on the pallets, but rather the clack of the button against the hole in the shell through which the button protrudes.  I thought that a felt lining on the hole would be nice, but it seems that would require enlarging the hole, which makes me a little nervous. 
Logged

Tone Dumb Greg

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4955
    • Dartmoor Border Morris
Re: Reduce clack of bass buttons on Paolo Soprani
« Reply #1 on: December 23, 2020, 07:45:31 PM »

Lester shows you how to do this on a pokerwork

https://sites.google.com/view/hohnerhotrod
Logged
Greg Smith
DG/GC Pokerwork, DG 2.4 Saltarelle, pre-war CF Hohner, Hohner 1040 Vienna style, old  BbEb Hohner that needs a lot of work.

ACCORDION, n. An instrument in harmony with the sentiments of an assassin. Ambrose Bierce

Gonk

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 507
  • (Mudlark Music)
    • Mudlark Music
Re: Reduce clack of bass buttons on Paolo Soprani
« Reply #2 on: December 23, 2020, 08:06:38 PM »

Lester does have the advantage of going directly into wood with the tapered reamer.  I'm not sure what would happen with celluloid.  I would imagine that it would depend on how securely it is attached to the wood at that spot.  (?)

PS - I have done things like this by supergluing sandpaper around a dowel.  This is pretty celluloid-safe, as long as you rotate more than saw, and don't motorize it.
« Last Edit: December 23, 2020, 08:10:36 PM by Gonk »
Logged
Mudlark Music - restoration, repairs, lessons, and sales.  (USA)  http://mudlark-music.com

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: Reduce clack of bass buttons on Paolo Soprani
« Reply #3 on: December 23, 2020, 08:09:33 PM »

Lester does have the advantage of going directly into wood with the tapered reamer.  I'm not sure what would happen with celluloid.  I would imagine that it would depend on how securely it is attached to the wood at that spot.  (?)
Works just as well on Hohner Ericas, celluloid covered, the only extra thing I do is to put a strip of painters tape over the holes before I start the reaming.

JNM SY

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 227
Re: Reduce clack of bass buttons on Paolo Soprani
« Reply #4 on: December 23, 2020, 09:49:47 PM »

I've not tried it on bass buttons but some makers put pads of self-adhesive felt on each side of the hole, slightly overlapping the hole on each side. Ive done this on the inside of the treble key plate and it works well.       John.
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Reduce clack of bass buttons on Paolo Soprani
« Reply #5 on: December 24, 2020, 12:21:06 PM »

You may need to make some modifications to Lester's method for your Paolo Soprani.

The case is thicker on the Paolo, and the full diameter of the buttons extends all the way through the casing.  In the Hohner only a short length of button acts in the hole.  As a result you need to get the hole much closer to parallel sided than you can achieve with Lester's strongly tapered reamer.  It's also helpful to use a machine reamer rather than hand held to keep the reamer parallel to the hole and without rocking.  The reamer I use is this taper pin reamer though you will need a larger diameter for the Paolo buttons.   My reamer has a morse taper fitting so it goes into a pillar drill, or lathe headstock which makes the reaming operation much faster, and more accurate.

You only get one chance when enlarging holes, so plan carefully and don't skimp on tools.

If you don't want to invest in tools then you could try using smaller diameter buttons in the existing holes to allow space for bushing material.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Graham W

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 277
Re: Reduce clack of bass buttons on Paolo Soprani
« Reply #6 on: December 24, 2020, 01:48:45 PM »

There is something which intrigues me evey time bushing bass buttons come up . . . . .  tapered reamers!

I do appreciate that whatever you do to get some bushing in will improve the situation compared to not having any, but it seems clear to me that the bass buttons or pistons are a cylindrical shaft running in a cylindrical hole. If you use a steeply tapered reamer the hole will only be the correct diameter at one point, at the very bottom where it is furthest away from where your finger is putting any lateral movement on the button.
Surely if you make a parallel, cylindrical hole then the button can be perfectly supported along its entire length?

I start by measuring the diameter of the button, add the thickness of your bushing material plus any running clearance required  -  and make a test hole exactly that size. In practice you may have to fine tune the size slightly from the measurement to get a perfect feeling button movement.

It's important then that the cutting tool is held exactly square and perpendicular to the instrument,  and concentric to the hole, to get a perfect result. If there is any wobble or 'off square' with a hand held tool then the hole is likely to end up slightly irregular or oval.

I'm fortunate to have a milling machine so I use that, but a bench drill or anything that holds the cutter rigid, square and true could be used. 
A milling cutter can be used to open out a hole in wood with an excellent clean and smooth finish, but if I don't have one the exact size then 'expanding reamers' can be used to progressively open out the hole until it reaches the required size.  Don't run these under power unless your machine has an extremely slow bottom speed, otherwise simply turn the chuck by hand while the reamer is entering and leaving the hole, always forwards as backwards can quickly spoil the edges of the blades.

Celluloid is a little trickier as it can sometimes tend to lift, I would personally only attempt these with expanding reamers in very small increments, as any cutter with a conventional spiral risks lifting the finish.  'Reverse spiral' cutters are available which push the swarf downwards when you want no risk of surface breakout which could be ideal for this operation - but I don't have any the right size so have never tried for this purpose.

Theo's taper pin reamer would be an excellent compromise for celluloid as the taper is so small that it wouldn't be too significant a change in diameter over a shallowish hole, and it would put no upward pressure on the celluloid when exiting the hole - the downside is that one that big would cost a fortune so probably uneconomic unless you're doing it regularly.

There must be other methods, there are lots of ways to make holes, but it seems to me that squareness and accuracy are important.

Like many jobs on melodeons it's engineering in wood, with some adaptation to the tools and techniques as required.
Logged

playandteach

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3526
  • Currently a music teacher in a high school.
Re: Reduce clack of bass buttons on Paolo Soprani
« Reply #7 on: December 24, 2020, 03:34:26 PM »

I've only done this a couple of times, but used a reamer from both sides of the hole. I think that the top of the hole is the important bit, as the rods are 'free' inside the box any, and if held away from the wood towards the tops of the hole then they aren't an issue anywhere else in the hole. Obviously having the right machinery would be an advantage. I did try a hand drill, which exploded the raised strip for the inside row. That's not something I'll try again.
Logged
Serafini R2D2 GC, Serafini GC accs 18 bass

Anahata

  • This mind intentionally left blank
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 6767
  • Oakwood D/G, C/F Club, 1-rows in C,D,G
    • Treewind Music
Re: Reduce clack of bass buttons on Paolo Soprani
« Reply #8 on: December 24, 2020, 03:51:36 PM »

Has anyone tried making bass buttons and bushes to a precision running fit, so there's no room to rattling audibly, instead of using felt to absorb the slack? I guess it would require metal or hard plastic, not wood. It sounds like the sort of thing Briggs might do, but I haven't seem the Briggs bass button mechanism so I don't know if they do that.
Logged
Слава Україні !
Music recording and web hosting: www.treewind.co.uk
Mary Humphreys and Anahata: www.maryanahata.co.uk
Ceilidh band: www.barleycoteband.co.uk

Rob2Hook

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2278
  • Castagnaris, Hohners & Baffetti
Re: Reduce clack of bass buttons on Paolo Soprani
« Reply #9 on: December 24, 2020, 04:15:49 PM »

That sounds like a good, pragmatic solution, Anahata.  A top hat (flanged) bush turned from Delrin might be very effective, being self lubricating.  They would probably require close hand reaming once fitted as there is no give as offered by a felt bush.  Anyone fancy trying this on a Pokerwork?  Mind you, on a Pokerwork you'd need to improve on that bent nail connector - the clatter from that can cover the rattle of the buttons!

Rob.
Logged

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: Reduce clack of bass buttons on Paolo Soprani
« Reply #10 on: December 24, 2020, 04:17:56 PM »

I'm not sure a precisely engineered hole would work as the buttons do not go move in a straight line but describe a number of different, albeit, curve as they are depressed.

Rob2Hook

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2278
  • Castagnaris, Hohners & Baffetti
Re: Reduce clack of bass buttons on Paolo Soprani
« Reply #11 on: December 24, 2020, 04:28:42 PM »

That's true, Lester.  It might work well with only minimal clearance, though.  Perhaps one should introduce a second pivot close to the button so as to promote straight movement - though that gives you two bent nails per button!  ;D

OK - anyone like to try this on an old, knackered Pokerwork?

Rob.
Logged

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: Reduce clack of bass buttons on Paolo Soprani
« Reply #12 on: December 24, 2020, 04:32:44 PM »

That's true, Lester.  It might work well with only minimal clearance, though.  Perhaps one should introduce a second pivot close to the button so as to promote straight movement - though that gives you two bent nails per button!  ;D

OK - anyone like to try this on an old, knackered Pokerwork?

Rob.
8 x miniature Watt's Linkages should cure the problem  (:)

Graham W

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 277
Re: Reduce clack of bass buttons on Paolo Soprani
« Reply #13 on: December 24, 2020, 04:40:04 PM »

That sounds like a good, pragmatic solution, Anahata.  A top hat (flanged) bush turned from Delrin might be very effective, being self lubricating.  They would probably require close hand reaming once fitted as there is no give as offered by a felt bush.  Anyone fancy trying this on a Pokerwork?  Mind you, on a Pokerwork you'd need to improve on that bent nail connector - the clatter from that can cover the rattle of the buttons!

Rob.

The engineering would be easy, and the pistons used on things other than Hohners are made of acetal (of which Delrin is one type) anyway.
 As Lester points out, the buttons do move in a infinitesimal arc which a close fitting felt bush will readily absorb.  The running fit required to accommodate this movement with a 'hard' bush would I suspect be just about enough to give back the rattle that was otherwise carefully engineered out  ;D
Logged

Gonk

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 507
  • (Mudlark Music)
    • Mudlark Music
Re: Reduce clack of bass buttons on Paolo Soprani
« Reply #14 on: December 24, 2020, 05:21:43 PM »

A Watt's linkage would just introduce more infinitesimal arcs, wouldn't it?  A Peaucellier-Lipkin linkage would fix that.  :)
Logged
Mudlark Music - restoration, repairs, lessons, and sales.  (USA)  http://mudlark-music.com

Anahata

  • This mind intentionally left blank
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 6767
  • Oakwood D/G, C/F Club, 1-rows in C,D,G
    • Treewind Music
Re: Reduce clack of bass buttons on Paolo Soprani
« Reply #15 on: December 24, 2020, 05:28:52 PM »

That's true, Lester.  It might work well with only minimal clearance, though.  Perhaps one should introduce a second pivot close to the button so as to promote straight movement - though that gives you two bent nails per button!  ;D

Yes you would typically need an extra pivot to allow pure linear button motion.
Instead of bent nails, this would obviously need some more linkages engineered with Swiss watch precision.
Logged
Слава Україні !
Music recording and web hosting: www.treewind.co.uk
Mary Humphreys and Anahata: www.maryanahata.co.uk
Ceilidh band: www.barleycoteband.co.uk

blunderbox

  • Good talker
  • **
  • Offline Offline
  • Posts: 74
Re: Reduce clack of bass buttons on Paolo Soprani
« Reply #16 on: December 26, 2020, 07:04:57 PM »

Lots of great info here, thanks all.  Is there anybody out there who owns/plays a box that has done this, either ream or swap out the buttons for smaller ones? 
Logged

playandteach

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3526
  • Currently a music teacher in a high school.
Re: Reduce clack of bass buttons on Paolo Soprani
« Reply #17 on: December 26, 2020, 09:12:03 PM »

I've been looking at the new Serafini mech design, and am really intrigued. Does anyone know what they'd do if something broke though? I guess the 3d printed stuff could come with a couple of spares?
Have a look at the Tour de L'Atelier video.
https://www.diatoz.fr/accord%C3%A9ons-s%C3%A9rafini/caract%C3%A9ristiques/
Logged
Serafini R2D2 GC, Serafini GC accs 18 bass

hickory-wind

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 627
  • Lives in NY USA near the Erie Canal
    • Bellingers' Button Boxes
Re: Reduce clack of bass buttons on Paolo Soprani
« Reply #18 on: December 26, 2020, 09:26:11 PM »

That sounds like a good, pragmatic solution, Anahata.  A top hat (flanged) bush turned from Delrin might be very effective, being self lubricating.  They would probably require close hand reaming once fitted as there is no give as offered by a felt bush.  Anyone fancy trying this on a Pokerwork?  Mind you, on a Pokerwork you'd need to improve on that bent nail connector - the clatter from that can cover the rattle of the buttons!

Rob.

Like this?
Logged
too many boxes...please buy one, or two, or

hickory-wind

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 627
  • Lives in NY USA near the Erie Canal
    • Bellingers' Button Boxes
Re: Reduce clack of bass buttons on Paolo Soprani
« Reply #19 on: December 26, 2020, 09:37:06 PM »

These are CNC turned out of slippery delrin. I punch out and attach felt cushions on the top flange. There is so much clearance on Pokerworks I don't even need to ream the hole. These just press in to the existing holes. It is a very clean looking and fast solution. I've used them on a handful of my recent restorations. Here is one:

https://youtu.be/rCT5ZKF0KyE

Scott

« Last Edit: December 26, 2020, 09:40:53 PM by hickory-wind »
Logged
too many boxes...please buy one, or two, or
Pages: [1] 2   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal