Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: 1 [2]   Go Down

Author Topic: Reduce clack of bass buttons on Paolo Soprani  (Read 3167 times)

0 Members and 1 Guest are viewing this topic.

Anahata

  • This mind intentionally left blank
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 6767
  • Oakwood D/G, C/F Club, 1-rows in C,D,G
    • Treewind Music
Re: Reduce clack of bass buttons on Paolo Soprani
« Reply #20 on: December 26, 2020, 09:46:20 PM »

These are CNC turned out of slippery delrin. I punch out and attach felt cushions on the top flange. There is so much clearance on Pokerworks I don't even need to ream the hole. These just press in to the existing holes. It is a very clean looking and fast solution. I've used them on a handful of my recent restorations. Here is one:

https://youtu.be/rCT5ZKF0KyE

Scott

There's some noise from the bass end, but as far as I can make out, it's only pallet noise when you release the button, nothing when you push the button, so that seems to be a success!
Logged
Слава Україні !
Music recording and web hosting: www.treewind.co.uk
Mary Humphreys and Anahata: www.maryanahata.co.uk
Ceilidh band: www.barleycoteband.co.uk

Rob2Hook

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2278
  • Castagnaris, Hohners & Baffetti
Re: Reduce clack of bass buttons on Paolo Soprani
« Reply #21 on: December 27, 2020, 12:48:08 PM »

Like this?

Exactly like that!  I particularly like the felt being attached to the bush to replace the one mormally fitted under the head of the bass button.  We expect to see a felt and by being repositioned it disguises the additional bush.

Do you offer these for sale as a spare part?  Export to UK could be a bit tricky at present...

Rob.
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Reduce clack of bass buttons on Paolo Soprani
« Reply #22 on: December 27, 2020, 07:55:18 PM »

Export from USA to UK should not be any different than before Brexit.  There could be delays due to the heavy traffic couriers are moving because of covid,  otherwise customs and vat rules are unchanged.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

blunderbox

  • Good talker
  • **
  • Offline Offline
  • Posts: 74
Re: Reduce clack of bass buttons on Paolo Soprani
« Reply #23 on: December 29, 2020, 06:31:53 PM »

Is there anyone who plays a 50s/60s Paolo that has tried any of these interesting methods to reduce the clack on the bass side? 
Logged

hickory-wind

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 627
  • Lives in NY USA near the Erie Canal
    • Bellingers' Button Boxes
Re: Reduce clack of bass buttons on Paolo Soprani
« Reply #24 on: December 29, 2020, 09:26:16 PM »

Like this?

Do you offer these for sale as a spare part?  Export to UK could be a bit tricky at present...

Rob.

Rob-
I did a 'proof of concept' prototype run and made enough for myself for a few years. I don't plan on selling these as parts at this time. If I determined there was enough interest I could look into doing another small production run but it would depend on what folks would be willing to pay to see if it would be worthwhile. My gut feel is that including design, CNC programming, machine setup, material acquisition, and per part material and machine time for a 1000 part run would end up with a $5 to $10 cost per bushing. Would folks pay that much? Could I sell 1000? What do you think? I'm doubtful.

3D printing may be a cheaper way to go for small productions but I'm not aware if delrin is one of the materials you can use in a 3D printer. There may be a material with low friction characteristics that could work. As an engineering faculty member I have access to machine shops at my university. They encourage faculty to do research but not production runs on the equipment.

That being said, if someone buys an instrument from me or has me do a restoration project I would be willing to give them an extra set of eight bushings to get some feedback on the experience of installing and using them on their own instrument. It is important though that the buttons are very straight and square by tweaking the internal metal rods. Once done it will then prevent future bending of the rods since the slop that allows bending via external force has been removed.

Scott
« Last Edit: December 29, 2020, 09:31:01 PM by hickory-wind »
Logged
too many boxes...please buy one, or two, or

MikeK

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 354
Re: Reduce clack of bass buttons on Paolo Soprani
« Reply #25 on: December 29, 2020, 09:57:21 PM »

Is there anyone who plays a 50s/60s Paolo that has tried any of these interesting methods to reduce the clack on the bass side?

I have a black badge Paolo with script writing but not sure whether from the 60's or 70's. I don't play bass any more due to hand problems.
Mine clacks a bit on a few buttons but on opening it up, I found that it's not the buttons that clack but the rods that lift a set of pallets making
 that noise when released. as they come down on the rods from the other row. In my case, I think it could be sorted by replacing the felt on the row with
 8 pallets. Hope that makes sense.
« Last Edit: December 30, 2020, 11:46:08 AM by MikeK »
Logged
I always respect my elders but they are getting fewer in numbers.

Rob2Hook

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2278
  • Castagnaris, Hohners & Baffetti
Re: Reduce clack of bass buttons on Paolo Soprani
« Reply #26 on: December 30, 2020, 01:34:43 PM »

Scott,

Thanks for your candid and detailed reply.  I suspect your doubts are justified, it's unlikely that even such a "simple" improvement would generate sufficient sales to fund a production run.  That is both the joy and sorrow of such things.  A fettler can often devise and develop an improved components which could have been incorporated from the manufacturer at little cost, yet as an aftermarket, stand-alone part it becomes rather costly. In your instance, sluggish sales should mean adding an additional cost to cover your investment in slow moving stock.

Back in the day, working in the aerospace industry, this would have been the kind of job that would be made during a few lunch hours.  Now retired, I have no contact with craftsman turners and millers - a very frustrating state of affairs!

Rob.
Logged

Winston Smith

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4066
  • AKA Edward Jennings
    • "Our Luxor B&B" Luxor life, slice by slice.
Re: Reduce clack of bass buttons on Paolo Soprani
« Reply #27 on: December 30, 2020, 03:07:48 PM »

Yes, Scott. Your explanation of small parts production in the real world certainly puts people like me in my place! I'm more used to finding something which "nearly" does the job and then modifying it to my satisfaction (or thereabouts!) as long as it works.
Perhaps, if I save hard and eventually buy a box from you, I can then claim my "extras", lol.
Logged
At last, broken and resigned to accept conformity.
Oh, how I LOVE Big Brother!

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Reduce clack of bass buttons on Paolo Soprani
« Reply #28 on: December 30, 2020, 03:14:11 PM »

Is there anyone who plays a 50s/60s Paolo that has tried any of these interesting methods to reduce the clack on the bass side?

I've not bushed the bass buttons on a Paolo, but before embarking on significant and non-reversible modification I would want to be sure of where the noise was originating from.  It's more common in my experience for clacks and rattles to come from pallets closing and from loose joints between pushrod and lever and where the lever pivots in it's metal mounting bracket.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

hickory-wind

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 627
  • Lives in NY USA near the Erie Canal
    • Bellingers' Button Boxes
Re: Reduce clack of bass buttons on Paolo Soprani
« Reply #29 on: December 30, 2020, 03:21:47 PM »

The best way to make the flanged bushings would be a plastic injection molding machine. It is a very simple shape so a mold would be relatively cheap (compared to the normal $8000 to $25000 for a high production complicated mold) and is small enough to allow a benchtop or small vertical press for limited production. Mold cycle would be between 20 and 100 seconds per shot. If I can ever find one of these small molding machines cheap I may be tempted to get it for prototype and small production runs. New they cost $10k and up although I'm starting to see some benchtop micro presses that may be cheaper.

The OP goal is probably best addressed by the shallow angle tapered reamer and felt lined hole as suggested by earlier posters.

Scott
Logged
too many boxes...please buy one, or two, or

MikeK

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 354
Re: Reduce clack of bass buttons on Paolo Soprani
« Reply #30 on: December 30, 2020, 04:41:02 PM »

Is there anyone who plays a 50s/60s Paolo that has tried any of these interesting methods to reduce the clack on the bass side?


I would like to see if the bass mechanism is the same as in my box. A photo would be helpful.
« Last Edit: January 12, 2021, 02:52:18 PM by MikeK »
Logged
I always respect my elders but they are getting fewer in numbers.

blunderbox

  • Good talker
  • **
  • Offline Offline
  • Posts: 74
Re: Reduce clack of bass buttons on Paolo Soprani
« Reply #31 on: January 06, 2021, 09:35:27 PM »

Given that it appears that no one out there has ever added felt around the button openings on a Paolo, I'll take that as good evidence that it is not a good idea.  I've attached a few photos of the bass side with the cover removed.  I'll investigate other means of reducing noise, as has been suggested by Theo and others. 
Logged

MikeK

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 354
Re: Reduce clack of bass buttons on Paolo Soprani
« Reply #32 on: January 06, 2021, 10:05:01 PM »

 The mechanism is the same as on mine, apart  from the air button. Mine is wedge shaped.
Check that the elongated rods that  lift the 8 pallets are not making the clacking noise when they are lifted and then released,
coming into contact with the rods on the other row.
Logged
I always respect my elders but they are getting fewer in numbers.

blunderbox

  • Good talker
  • **
  • Offline Offline
  • Posts: 74
Re: Reduce clack of bass buttons on Paolo Soprani
« Reply #33 on: January 07, 2021, 01:45:33 AM »

Thanks Mike!
Logged
Pages: 1 [2]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal