Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Meinel and Herold Hohner, questions about repairing  (Read 1735 times)

0 Members and 1 Guest are viewing this topic.

Andy Cleveland

  • Member
  • *
  • Offline Offline
  • Posts: 17
Meinel and Herold Hohner, questions about repairing
« on: January 09, 2021, 01:39:50 PM »

Hi everyone,

I bought a Meinel and Herold Hohner on eBay a couple of weeks ago basically because it looked cool and in not terribly bad shape. (I didn't spend a lot on it) Now I've had a good look at it here are some observations. Please take a look at the pictures and see if it is worth restoring. If anyone knows something of the age or history of this please let me know also.
 
Pictures https://drive.google.com/drive/folders/1waGAX6xCqIm1uIVCG3w4AOpw6lyEce9h?usp=sharing

a:) The keyboard mechanism seems really terribly designed, the pallets interfere with each other and there are shims that have been inserted to remedy this. Is it possible to make this keyboard useful?

b:) It was serviced in 1974, despite this it was suprisingly nicely in tune and to my untrained eyes the reeds and valves look ok but needs re-waxing at least.

c:)It has clasps instead of bellows pins and this seems like a point of failure can bellows pins be used at keep these for ornamental
purposes?
 
Thanks in advance for any insights y'all may have
Logged

Peadar

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2039
Re: Meinel and Herold Hohner, questions about repairing
« Reply #1 on: January 09, 2021, 03:17:48 PM »

Sidehooks are an indication of the era of the box and there is nothing wrong with them in principle.
The bellows corner plates suggests the original bellows have been replaced with a set from an early Hohner.
You might be able to turn some of the sidehooks  so that all drop down to lock- it avoids them opening while you are playing - otherwise a drop of polystyrene cement behind the hook does the same and can be easily lifted away with the point of a pin or jeweller's screwdriver any time you do need to look inside.
Logged

Andy Cleveland

  • Member
  • *
  • Offline Offline
  • Posts: 17
Re: Meinel and Herold Hohner, questions about repairing
« Reply #2 on: January 09, 2021, 03:47:43 PM »

Thanks those seem like some good ideas. I'm going to replace the bellows gaskets hopefully that will tighten up the clamps too.
Logged

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: Meinel and Herold Hohner, questions about repairing
« Reply #3 on: January 09, 2021, 04:49:36 PM »

b:) It was serviced in 1974, despite this it was suprisingly nicely in tune and to my untrained eyes the reeds and valves look ok but needs re-waxing at least.

Many of the valves are now curling, and at that age, 46 years, the leather will be going stiff and not working efficiently. The wax definitely needs renewing in several places, so you really should do everything: take off all the reed plates and scrap the valves (don't try to salvage any of them). Clean off all the old wax from the reed plates (acetone is good for this), and gently scrape the old wax of the reed blocks and chamber walls. replace the valves with new ones, rewax the reed plates and retune. It should be quite a nice box after all that, so definitely worth doing.
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

Peadar

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2039
Re: Meinel and Herold Hohner, questions about repairing
« Reply #4 on: January 09, 2021, 05:06:29 PM »

Thanks those seem like some good ideas. I'm going to replace the bellows gaskets hopefully that will tighten up the clamps too.
If they are leather bellows gaskets in the first instance you can  wake up the rise on the leather with a toothbrush. which improves the seal.
Logged

Andy Cleveland

  • Member
  • *
  • Offline Offline
  • Posts: 17
Re: Meinel and Herold Hohner, questions about repairing
« Reply #5 on: January 09, 2021, 06:33:20 PM »

Thank you for the advice Steve and especially saying it would be worth doing (I see you are from Sheffield so you can be trusted ;) I'm from Scunthorpe originally) I guess i'm going to be learning how to put valves on then. Well, I wanted a project to do!

b:) It was serviced in 1974, despite this it was suprisingly nicely in tune and to my untrained eyes the reeds and valves look ok but needs re-waxing at least.

Many of the valves are now curling, and at that age, 46 years, the leather will be going stiff and not working efficiently. The wax definitely needs renewing in several places, so you really should do everything: take off all the reed plates and scrap the valves (don't try to salvage any of them). Clean off all the old wax from the reed plates (acetone is good for this), and gently scrape the old wax of the reed blocks and chamber walls. replace the valves with new ones, rewax the reed plates and retune. It should be quite a nice box after all that, so definitely worth doing.
Logged

Andy Cleveland

  • Member
  • *
  • Offline Offline
  • Posts: 17
Re: Meinel and Herold Hohner, questions about repairing
« Reply #6 on: January 09, 2021, 06:36:40 PM »

Thanks Peadar, the gasket had been replaced with the same stuff that's available today but it was so compressed it is no good. If the stuff I ordered doesn't quite fill the gap I may put a thin wood veneer on the casing.

Thanks those seem like some good ideas. I'm going to replace the bellows gaskets hopefully that will tighten up the clamps too.
If they are leather bellows gaskets in the first instance you can  wake up the rise on the leather with a toothbrush. which improves the seal.
Logged

folkloristmark

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 582
    • street entertainers
Re: Meinel and Herold Hohner, questions about repairing
« Reply #7 on: January 09, 2021, 07:40:48 PM »

IMHO Nothing wrong with reusing valves , some people swear by it,I do a lot,and its very interesting if thats what you want , but Steve is right when you rewax then you should at least re-glue them and you might as well fit new ones. Also if you dont remove them you will find that the heat of waxing will often make them curl even if they looked fine and they dont fall off.You will find that the handling during tuning often leads to their demise so you have to redo them anyway. I am interested at the moment as to experimenting with reused valves on  boxes to see how close you retain the old used sound etc and am getting better at it, but in the real world you might as well replace if you are doing a full rewax unless its your thing.Quite a few times I dont like the result so have to revalve and hence tune again and if you dont rewax thats a chore.I would say learn about new valves before you start learning about old valves, old valves are not a short cut and you wont be able to save all the valves so you need a supply of replacements anyway.

That box will be fine if it restores. I can see the wax cracking so if you overplay it now they will start to fall out. I think if you keep handling to a minimal then the should retain most of their tunefulnes. I personally would not use any fluids or cleaners if you can avoid it, old wax will gently scrap off. I bet it was not played much since the seventies.As long as the wood is good no warps or splits its worth doing

PS with those type of pallets check the wood itself isnt warped they are easy to fabricate but pointless trying to refelt if warped
use a keen eye. Try to avoid taking the mech off at both the keyboard and wire to wood point if you can unless it sticks on the axles this is not necessary. Those wires will bend and are quite soft its coat hanger wire if needed but its the pallet to wire end that needs to be set right.

good luck go slowley and dont over restore
« Last Edit: January 09, 2021, 07:58:02 PM by folkloristmark »
Logged
Mark Taylor
Folkloristmark

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: Meinel and Herold Hohner, questions about repairing
« Reply #8 on: January 10, 2021, 12:36:24 AM »

IMHO Nothing wrong with reusing valves , some people swear by it,I do a lot,and its very interesting if thats what you want , but Steve is right when you rewax then you should at least re-glue them and you might as well fit new ones. Also if you dont remove them you will find that the heat of waxing will often make them curl even if they looked fine and they dont fall off.You will find that the handling during tuning often leads to their demise so you have to redo them anyway. I am interested at the moment as to experimenting with reused valves on  boxes to see how close you retain the old used sound etc and am getting better at it, but in the real world you might as well replace if you are doing a full rewax unless its your thing.Quite a few times I dont like the result so have to revalve and hence tune again and if you dont rewax thats a chore.I would say learn about new valves before you start learning about old valves, old valves are not a short cut and you wont be able to save all the valves so you need a supply of replacements anyway.

I think you have just convinced yourself that new valves is the way to go!  ::)

Honestly, it really isn't a good idea to re-use old valves. The idea of re-using old valves simply to retain the 'old sound' is false. Originally these leather valves would have been soft and pliable, so replacing them with new leather valves would give you the original sound far more faithfully. Even using plastic vinyl valves for the smaller ones has a negligible impact on the sound, and they are far less prone to curling.

Quote
...I personally would not use any fluids or cleaners if you can avoid it, old wax will gently scrap off.

Yes, the old wax will scrape off, and I do this to remove the bulk of the old wax. But to thoroughly clean off the residue, a few minutes soak in a shallow bath of acetone does the job properly and leaves the reed plates free both old wax and also removes any residual glue from where the valves have been attached. Acetone is good not only because it is cheap and relatively non-toxic, but also because it does not react with, or disturb, the riveted join of the reed tongue with the reed plate.

In the UK, industrial grade acetone is readily available from boat-building and fibreglass dealers. I get mine from here:
https://www.mbfg.co.uk/acetone.html
A litre for £6 goes a long way and lasts a long time.

I don't use solvents on the wood reed blocks. It will dissolve any varnish and will probably affect the glue too.
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

Anne Croucher

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 203
Re: Meinel and Herold Hohner, questions about repairing
« Reply #9 on: January 10, 2021, 04:30:03 AM »

Oh - I was just going to try to be useful, but my Meinel and Herold is totally different.
Having been lucky in buying boxes I have not needed to do all that much, but find that a little careful cleaning and small improvements seem to be well worth the effort.
Logged
Barcarole D/G
Hohner Ericas D/G and C/F
Hohner el Rey del Vallenato A/D/G aka 'Elvis'
Hohner Liliput Bb/Eb club layout
Meinel & Herold G C F 3 voice 3 row 16 bass

Andy Cleveland

  • Member
  • *
  • Offline Offline
  • Posts: 17
Re: Meinel and Herold Hohner, questions about repairing
« Reply #10 on: January 10, 2021, 02:49:22 PM »

Thank you all for the good suggestions and advice. When ordering new valves do I just measure the old ones and get enough that are slightly larger so they can be trimmed to size? Is there a particular glue to use? I'm still not sure what to do with the keyboard, there is a bit of side to side motion with the wires and it looks like it was shimmed to alleviate that. Has somebody dealt with this particular keyboard arrangement before? I've replaced the pads on my Erica and restricted the buttons so I'm o.k with that procedure.

Thanks
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Meinel and Herold Hohner, questions about repairing
« Reply #11 on: January 10, 2021, 03:21:57 PM »

I have worked on keyboards like that before several times. If the axle rod comes out in one piece then the rest is all possible with care.  If the axle rod is too tight to move then you just have to live with it as it is.  I have heard of people using an electric current through a tight axle rod to loosen it with heat, but I’ve not tried that myself.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: Meinel and Herold Hohner, questions about repairing
« Reply #12 on: January 10, 2021, 05:05:14 PM »

Thank you all for the good suggestions and advice. When ordering new valves do I just measure the old ones and get enough that are slightly larger so they can be trimmed to size?

You will normally expect to trim most of the new valves to length. A sharp craft knife is OK, but I prefer to use sharp scissors. The lengths of underneath valves are especially critical. You need to have them just long enough to cover the slot, but any longer and you risk them fouling the end of the reed chamber, which will affect the sound, pitch and performance. Similarly with getting them mounted not so close to the edge of the reed plate that they foul the sides of the reed chamber, with equally woeful results!

Charlie Marshall has a good selection of valves in different sizes and materials. For quietest valve action, it's worth using leather or vileda valves on the lowest 3 or 4 reed plates, but for the higher and smaller reed plates, vinyl is fine.
http://www.cgmmusical.co.uk/CGM_Musical_Services/Reed_Valves.html

Quote
Is there a particular glue to use?

This has been covered more than once on the forum, with in-depth responses, so a forum google search is a good idea. See blue menu strip at the top of every page.
But you can either use the proprietary glue like this:
http://www.cgmmusical.co.uk/CGM_Musical_Services/Reed_Valves.html#21
or use a low-solvent or solvent-free contact adhesive such as Bostik. Just put a thin smear on the end of the valve (last 5 mm to 10 mm, depending on the valve size; be guided by the previous glued length) and then press into place immediately. No need to apply glue to both surfaces, nor to wait for a few minutes for the glue to go tacky.

You might find this section of Lester's video helpful:
https://youtu.be/frzbE8P0t_o?t=537

Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Meinel and Herold Hohner, questions about repairing
« Reply #13 on: January 10, 2021, 06:29:52 PM »

Ordinary contact adhesive with solvent works fine too.  Occasionally it may react with some types of plastic valves, so test it first.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

folkloristmark

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 582
    • street entertainers
Re: Meinel and Herold Hohner, questions about repairing
« Reply #14 on: January 10, 2021, 06:33:44 PM »

"I think you have just convinced yourself that new valves is the way to go! "

correct

Most of my instruments are tuned by others and I would never entertain them using old valves what would be the point. But once at home with endless ebay instruments then go ahead save money experiment if you want. Its certainly harder to use old valves and I agree they wont be as good as exact material replacements but some like the fact that hohners do noy always have to sound sound like  when they were new, its the difference between modern instrument and vintage ones. same with cars Modern cars and vintage ones.Thats the point I as making and exploring.Niche I expect . If theres nowt wrong with trying to make an 80 year old reed sound again why stop at the valve if it can be done. Then take it to a pro tuner if you are unhappy, you wont beat the likes of Theo. Mike Steve Paul .......... :|glug
Logged
Mark Taylor
Folkloristmark

Andy Cleveland

  • Member
  • *
  • Offline Offline
  • Posts: 17
Re: Meinel and Herold Hohner, questions about repairing
« Reply #15 on: January 11, 2021, 01:25:43 PM »

Steve_freereader,

Thanks for pointing out the Lester video. I think that's the only one I didn't watch as I wasn't sure why i needed a 4th button start.

Logged
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal