Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1] 2   Go Down

Author Topic: Hohner built-in button travel limit?  (Read 4229 times)

0 Members and 1 Guest are viewing this topic.

Jesse Smith

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 761
  • Buffalo, NY, USA
Hohner built-in button travel limit?
« on: January 11, 2021, 05:58:39 PM »

Did Hohner ever limit the button travel of Pokerwork-style boxes, right from the factory? My post-war presswood has a metal bar installed across the pallets, cushioned with plastic tubing, that blocks the pallets from rising farther than the bar. Could this have been original to the box, or was it an "aftermarket" improvement? The reason I wonder if it might be a factory option is because the bar is secured with the same types of washers and roundhead screws that secure the bass panel, etc.

What are the advantages and disadvantages to limiting button travel by blocking the pallet clearance, as opposed to the more typical wood block under the buttons to limit the distance the buttons can descend?

(ETA: Maybe this should have gone in the Instrument Design forum. Mods, please move it if you feel that's appropriate!)
« Last Edit: January 11, 2021, 06:26:51 PM by Jesse Smith »
Logged
Hohner Pokerwork D/G (x2!), Hohner one row four stops in D and C, Hohner Presswood C/F.

george garside

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5401
Re: Hohner built-in button travel limit?
« Reply #1 on: January 11, 2021, 06:23:30 PM »

Mally came up with a similar ideasome years ago and i think his version was simply a wooden bar  going the full width of the inside of the box.

I have 2 hohners in which the buttons could go down the holes  but don't for the simple reason I don't waste energy pressing them down
 the holes
george
Logged
author of DG tutor book "DG Melodeon a Crash Course for Beginners".

chris hall

  • Regular debater
  • ***
  • Online Online
  • Posts: 246
Re: Hohner built-in button travel limit?
« Reply #2 on: January 11, 2021, 06:24:34 PM »

neat job. pretty sure its got be an aftermarket fix as not seen on any hohners ive some across. looks like pallets have been fixed up so maybe done at same time. On some (like the HA114) such a method could be a solution where its not possible to limit button travel using other methods. Im currently exploring making a fingerboard for a single row with removable back to address this particular issue.
Logged

Kon

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 165
Re: Hohner built-in button travel limit?
« Reply #3 on: January 11, 2021, 06:41:43 PM »

I would guess this is after-market, doesn't look "period". But I wouldn't trust me, if you know what I mean.

Some thoughts about the restriction at pallet level rather than button level:

Pros:
- Independent of button height - bending levers to raise or lower buttons will not affect the button travel
- Arguably simpler to install than other methods
- Consistently achieves same height of pallet opening along the row (excluding the possibility of flex in the bar, and not consistent across rows, see below)

Cons:
- Not consistent across rows
- May put more strain on mechanism - the force to open the pallet is applied at one end of the leaver, the stop at the other end, putting the whole mechanism under strain - not sure whether this is powerful enough to e.g. bend the levers over time
- Possible flex in bar could lead to middle pallets opening further than high- / low-end ones

The few times I've seen this method used (most often with a strip of wood) I was always surprised that people didn't install a second bar at the height of the outside row pallets - the penalties in terms of weight, cost and labour would seem to be extremely low, but you would get consistent restriction across the rows.
Logged
GC Erica

Tufty

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 855
  • Dino Bincis etc
Re: Hohner built-in button travel limit?
« Reply #4 on: January 11, 2021, 07:16:22 PM »

I did the same thing using strips of cork tile fixed inside the grill of an Erica (the black 1980s model). It was still working ok 20 years later. I thought of putting it under the buttons but that was harder and I was too lazy! Certainly improved the playing experience.
Logged

Anahata

  • This mind intentionally left blank
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 6767
  • Oakwood D/G, C/F Club, 1-rows in C,D,G
    • Treewind Music
Re: Hohner built-in button travel limit?
« Reply #5 on: January 11, 2021, 07:22:29 PM »

I'm sure it's an owner mod.
I did something like this with my first Pokerwork. It's the easiest way to do it if you're scared of taking the box further apart.
Logged
Слава Україні !
Music recording and web hosting: www.treewind.co.uk
Mary Humphreys and Anahata: www.maryanahata.co.uk
Ceilidh band: www.barleycoteband.co.uk

Jesse Smith

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 761
  • Buffalo, NY, USA
Re: Hohner built-in button travel limit?
« Reply #6 on: January 11, 2021, 07:46:19 PM »

I suppose it is simpler in some sense than removing the keyboard to install a limiting block. I wonder what the piece of metal was originally intended for. It does seem quite purpose built and is the perfect size for this.

Kon, I was having similar thoughts about the potential to bend the button levers since this makes the effective lever arm much longer than when the button levers are blocked only an inch or so from the buttons. But I suppose if it hasn't caused problems yet it should be OK.

At what point does the pallet travel start to affect the sound? My understanding is that the pallets basically have an open/closed binary state, but as the pallet movement shrinks does the sound change? This box is rather sweet and mellow, and I don't know whether that's attributable to the H reeds on zinc plates, this unusual pallet restriction, or the asthmatic bellows with holes in the gussets.
Logged
Hohner Pokerwork D/G (x2!), Hohner one row four stops in D and C, Hohner Presswood C/F.

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: Hohner built-in button travel limit?
« Reply #7 on: January 11, 2021, 11:55:32 PM »

...At what point does the pallet travel start to affect the sound? My understanding is that the pallets basically have an open/closed binary state, but as the pallet movement shrinks does the sound change? This box is rather sweet and mellow, and I don't know whether that's attributable to the H reeds on zinc plates, this unusual pallet restriction, or the asthmatic bellows with holes in the gussets.

It is surprising how little the pallets need to open in order to give a good sound and not affect the tuning. For M reeds, anything more than a minimum of around 0.5 cm will probably be OK; 1 cm will be ample. You could test this for yourself on this instrument by just gently depressing the buttons a little way and listening to the sound quality, volume and pitch. There will be a minimum distance below which the sound will be weak and the pitch will be flat.

Vintage H reeds on zinc plates usually have a sweet, mellow sound, which is why they are worth preserving and treating them with respect when tuning/fettling.
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

Kon

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 165
Re: Hohner built-in button travel limit?
« Reply #8 on: January 12, 2021, 01:19:30 AM »

Kon, I was having similar thoughts about the potential to bend the button levers since this makes the effective lever arm much longer than when the button levers are blocked only an inch or so from the buttons. But I suppose if it hasn't caused problems yet it should be OK.

Yes, if it hasn't done any harm so far then presumably it's not a problem! I suppose you'd have to give the buttons a fair walloping to bend the levers.

At what point does the pallet travel start to affect the sound? My understanding is that the pallets basically have an open/closed binary state, but as the pallet movement shrinks does the sound change? This box is rather sweet and mellow, and I don't know whether that's attributable to the H reeds on zinc plates, this unusual pallet restriction, or the asthmatic bellows with holes in the gussets.

I experimented with this the other day, as I was fixing the travel on my Erica, and came to a very similar conclusion to Steve. 5mm seemed to be sufficient for the reeds to sound fully and reliably. Below that there is some modulation of the sound - I can't remember exactly how, but I wouldn't say in a desirable way.

Surprisingly, though, I do think my Erica sounds sweeter now the button travel is restricted, but I couldn't possibly say why. It might just be that I'm enjoying the more responsive feel and finding it easier to play more expressively - that seems the most likely explanation to me.

I suspect the sound characteristics of your box are far more likely to be determined (at least mostly) by the reeds, and maybe reedblock construction.
Logged
GC Erica

Winston Smith

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4066
  • AKA Edward Jennings
    • "Our Luxor B&B" Luxor life, slice by slice.
Re: Hohner built-in button travel limit?
« Reply #9 on: January 12, 2021, 08:50:43 AM »

"Surprisingly, though, I do think my Erica sounds sweeter now the button travel is restricted, but I couldn't possibly say why. It might just be that I'm enjoying the more responsive feel and finding it easier to play more expressively - that seems the most likely explanation to me."

It seems rather incongruous that you would think that having buttons which are bordering on being an on/off switch can be played more expressively; I just cannot see it. But I have to admit that I'm with George Garside on the "just don't press the buttons so far" frame of mind. Anyway, can pallet opening gap really add to playing expressively? I would have imagined that that would be more a function of controlling bellows movement and/or note/silence timings. (Not that I have a clue about it!)
Logged
At last, broken and resigned to accept conformity.
Oh, how I LOVE Big Brother!

-Y-

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 896
  • Handry 18 (G/C), Mélodie (D), Club IIb (A/D)
    • a database of nearly 500 melodeons here
Re: Hohner built-in button travel limit?
« Reply #10 on: January 12, 2021, 09:03:41 AM »

I did a similar operation on an Erica, it changed the feeling dramatically (in a good way). It's also a single bar and I'm not really satisfied that the travel is not limited equally on both rows, but as it's a C#/D I'm not using the C# row that often so that it's not a big deal in the end. But I may have a streak of motivation one day and see if I can't have a "battlement-shaped" bar to replace it and have equal travel.

It seems rather incongruous that you would think that having buttons which are bordering on being an on/off switch can be played more expressively

Well, if the sound doesn't change beyond a certain amount of button travel, as Steve rightly said earlier, then it makes no difference in terms of sound if you push the button a little or if you make them touch the bottom of the keyboard, so it's not really incongruous I think.

playandteach

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3526
  • Currently a music teacher in a high school.
Re: Hohner built-in button travel limit?
« Reply #11 on: January 12, 2021, 01:56:22 PM »

I agree that resolving a mechanical issue can cause musical playing to be more likely. Obviously if button travel doesn't bother you, then there's no need to change it. If on the other hand you rather like a definite stop to the button, then you may gain from losing that extra layer of irritation. Giving you more head space to focus on the important bits.
Naturally people have different styles, but also different finger shapes, sizes and approaches.
I suspect it may also depend on where you've come from to the melodeon. Every instrument I play has a definite closed finger position, clarinet, recorder, piano (even though the finger is never in contact with anything that is in contact with the string.
Perhaps if you are a singer, trombonist or theramin player, you are happier with finding your own arrival points.
Logged
Serafini R2D2 GC, Serafini GC accs 18 bass

george garside

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5401
Re: Hohner built-in button travel limit?
« Reply #12 on: January 12, 2021, 04:35:32 PM »

'expression'  comes from fine movement of the bellows  . once a pallet is clear of its hole the reed will sound  and how far the lift of the pallet is doesnt make any real difference.   some boxes have clattery pallets (free percussion!)  but that has nothing to do with distance off the hole but is inflenced by the construction of the pallets and the  brake lining material

george
Logged
author of DG tutor book "DG Melodeon a Crash Course for Beginners".

Dick Rees

  • Neo-Luddite
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1640
Re: Hohner built-in button travel limit?
« Reply #13 on: January 12, 2021, 04:46:51 PM »

'expression'  comes from fine movement of the bellows  . once a pallet is clear of its hole the reed will sound  and how far the lift of the pallet is doesnt make any real difference.   some boxes have clattery pallets (free percussion!)  but that has nothing to do with distance off the hole but is inflenced by the construction of the pallets and the  brake lining material

george

George...

You and I both chime in regarding silence and the spaces BETWEEN the notes.  While it may be true that pallet clearance has little effect on tone, when considering articulation and phrasing, the closing of the pallets does indeed come into play.  If you add to that the percussion inherent in closing, I feel the overall statement of the music benefits from having the ability to regulate pallet-slap, a feature which is to a great degree eliminated by limiting the action.

So I don't...
Logged
"You're making the wrong mistakes."
...Thelonius Monk

"I never made one of my discoveries through the process of rational thinking."
...Albert Einstein

"If Art Tatum took up classical music seriously, I'd quit my job the next day."
...Vladimir Horowitz

-Y-

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 896
  • Handry 18 (G/C), Mélodie (D), Club IIb (A/D)
    • a database of nearly 500 melodeons here
Re: Hohner built-in button travel limit?
« Reply #14 on: January 12, 2021, 05:10:51 PM »

If I agree that instrument noises are part of the music, I don't think it extends to the usual giganormous clatter you have on old (Hohner or not) boxes. I don't feel that limiting the racket makes for a less expressive instrument.

Andy Cleveland

  • Member
  • *
  • Offline Offline
  • Posts: 17
Re: Hohner built-in button travel limit?
« Reply #15 on: January 12, 2021, 05:23:55 PM »

In my post about The Meinel and Herold box I was worried about lateral movement and I had considered doing something like this as a guide for the wires to the pallets. Cool.
Logged

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: Hohner built-in button travel limit?
« Reply #16 on: January 12, 2021, 05:29:09 PM »

'expression'  comes from fine movement of the bellows  . once a pallet is clear of its hole the reed will sound  and how far the lift of the pallet is doesnt make any real difference.   some boxes have clattery pallets (free percussion!)  but that has nothing to do with distance off the hole but is inflenced by the construction of the pallets and the  brake lining material

george

George...

You and I both chime in regarding silence and the spaces BETWEEN the notes.  While it may be true that pallet clearance has little effect on tone, when considering articulation and phrasing, the closing of the pallets does indeed come into play.  If you add to that the percussion inherent in closing, I feel the overall statement of the music benefits from having the ability to regulate pallet-slap, a feature which is to a great degree eliminated by limiting the action.

So I don't...

<gentle rant alert>

I hope I have understood the previous remarks correctly...
Respectfully, I can't help feeling that there is something akin to inverse snobbery going on here. Perhaps that's too strong a term but it will have to do for now.

Reducing the typical Hohner noise and clatter by refacing the pallets and limiting the action travel does not render the instrument incapable of musical playing. It is entirely up to the player to bring music to life by phrasing, silences and gaps between notes, etc. To suggest that this is only possible on a rattly Hohner is, frankly, ridiculous. By extension, it also suggests that players of instruments e.g. Castagnari, Saltarelle, Dino Baffetti, etc. with more (shall we say) finely finished mechanics and action can never play musically, with sensitive phrasing, gaps and silences, etc., which of course is not the case (cue Andy Cutting, Saul Rose, Brian Peters, Simon Care... )

I play both Castagnaris and Hohners depending on the music and sound I want to achieve. But I also don't want extraneous rattles and clunks to get in the way of the music. That is why my Hohners have been de-rattled and do not have the buttons disappearing down mine shafts. It actually helps me play better and I am more satisfied with the music I am producing.

I want and expect my instruments to be in optimum mechanical condition. A pianist would not stand for noisy, rattly action or uneven key travel; a clarinettist would not tolerate sluggish keywork or sticky pads; a fiddle player would be hampered by a poorly set up bridge and fingerboard height - and so on. Why should a melodeon player's needs be any different?

</gentle rant alert>
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

Dick Rees

  • Neo-Luddite
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1640
Re: Hohner built-in button travel limit?
« Reply #17 on: January 12, 2021, 06:32:03 PM »

Steve...

I wasn't talking about rattly actions or noise.  Rather, the shape and definition of the space between the notes and any associated acceptable percussive articulation...whether more or less audible. 
« Last Edit: January 12, 2021, 06:37:06 PM by Dick Rees »
Logged
"You're making the wrong mistakes."
...Thelonius Monk

"I never made one of my discoveries through the process of rational thinking."
...Albert Einstein

"If Art Tatum took up classical music seriously, I'd quit my job the next day."
...Vladimir Horowitz

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: Hohner built-in button travel limit?
« Reply #18 on: January 12, 2021, 06:57:30 PM »

Steve...

I wasn't talking about rattly actions or noise.  Rather, the shape and definition of the space between the notes and any associated acceptable percussive articulation...whether more or less audible.

OK Dick, thanks. It was the "So I don't ..." bit that puzzled me.
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

Dick Rees

  • Neo-Luddite
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1640
Re: Hohner built-in button travel limit?
« Reply #19 on: January 12, 2021, 07:39:00 PM »

Steve...

No problem.
Logged
"You're making the wrong mistakes."
...Thelonius Monk

"I never made one of my discoveries through the process of rational thinking."
...Albert Einstein

"If Art Tatum took up classical music seriously, I'd quit my job the next day."
...Vladimir Horowitz
Pages: [1] 2   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal