Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: 1 [2]   Go Down

Author Topic: Columbia Acc. Co. NY repair work  (Read 4690 times)

0 Members and 2 Guests are viewing this topic.

boxcall

  • You got to love it!!!
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1801
Re: Columbia Acc. Co. NY repair work
« Reply #20 on: January 17, 2021, 10:16:01 PM »

Assorted bellows corners from Charlie Marshall
http://www.cgmmusical.co.uk/CGM_Musical_Services/Bellow_Corners.html#0
Thank you Theo, That would be a good option if I knew there is a 44AP there?
This ebay dealer has them I just didn’t see them first time around.
https://www.ebay.com/itm/Accordion-Metal-CORNERS-FOR-BELLOWS-SET-of-25-Type-44-AP-Balgecken/331445125944?hash=item4d2bab4338:g:e9AAAOSwYGFUsrYv

It’s the only size that is 28mm, actually measured either way works apparently. Math is a wonderful thing  (:) my leg to leg is 28mmx28mm ( so is the corner to corner)  and this is the only one I see this size. So radius is not important unless someone can show me an option?, it’s definitely a round radius
Logged
Hohner 1040 C, Beltuna one row four stop D, O'Byrne Dewitt/ Baldoni bros. D/C#, Paolo soprani "pepperpot" one row D

Winston Smith

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4066
  • AKA Edward Jennings
    • "Our Luxor B&B" Luxor life, slice by slice.
Re: Columbia Acc. Co. NY repair work
« Reply #21 on: January 18, 2021, 12:29:39 AM »

I'm rather puzzled by this problem identifying your corners. I have boxes with about 4 or 5 different radius corners on them. But by looking at the pictures depicting the different styles, I'm sure I can pick the ones out which I'd need without any trouble; they're so obviously different!

And, it's the radius which is important, not the length of the leg. If the radius is wrong on one corner, it'll not fit properly as well as look ridiculous.
 
As Theo suggested, just compare one of yours with those in the pictures.

Mind it's a smashing looking box, and 6 voices too, lucky man!
Logged
At last, broken and resigned to accept conformity.
Oh, how I LOVE Big Brother!

boxcall

  • You got to love it!!!
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1801
Re: Columbia Acc. Co. NY repair work
« Reply #22 on: January 18, 2021, 12:42:26 AM »

I'm rather puzzled by this problem identifying your corners. I have boxes with about 4 or 5 different radius corners on them. But by looking at the pictures depicting the different styles, I'm sure I can pick the ones out which I'd need without any trouble; they're so obviously different!

And, it's the radius which is important, not the length of the leg. If the radius is wrong on one corner, it'll not fit properly as well as look ridiculous.
 
As Theo suggested, just compare one of yours with those in the pictures.

Mind it's a smashing looking box, and 6 voices too, lucky man!
Winston, I just don’t want to buy the wrong one ;)
The lenght of leg does matter by the way as much as the radius if you want the tape to metal corner line to look right. Or to say all the corners are equal and the amount of tape overlap is the same.

And thanks I love it:)
Logged
Hohner 1040 C, Beltuna one row four stop D, O'Byrne Dewitt/ Baldoni bros. D/C#, Paolo soprani "pepperpot" one row D

Winston Smith

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4066
  • AKA Edward Jennings
    • "Our Luxor B&B" Luxor life, slice by slice.
Re: Columbia Acc. Co. NY repair work
« Reply #23 on: January 18, 2021, 09:32:17 AM »

Good morning! I expect that once you've sorted out which radius you need, the length of the legs will be right anyway. Remember that the bellows tape goes over the ends of those legs and the actual ends are, consequently, not seen.
Logged
At last, broken and resigned to accept conformity.
Oh, how I LOVE Big Brother!

mselic

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1683
Re: Columbia Acc. Co. NY repair work
« Reply #24 on: January 18, 2021, 12:33:03 PM »

Good morning! I expect that once you've sorted out which radius you need, the length of the legs will be right anyway. Remember that the bellows tape goes over the ends of those legs and the actual ends are, consequently, not seen.

Except that the edge of the legs *are* generally noticeable under the tape, so it’s much tidier-looking to have them all be the same length and line up.
Logged
C#/D player

boxcall

  • You got to love it!!!
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1801
Re: Columbia Acc. Co. NY repair work
« Reply #25 on: January 19, 2021, 09:01:27 PM »

Couple of breakdown photos, all reeds cleaned up well except for the one that broke.
The top reeds ( without leathers) had some rust but one must have been pretty rusted, all I did was to try to ping it and it broke.

It’s the F#/C# top M reed on D row any one got one of equal quality?
Happy to pay for it.

Couple reeds on the H row may have been replaced? Similar quality reed/ rivet but different plates.

I also broke down the keyboard to clean and figure out the springs (two need replacement) along with the missing lever bars.
The axle came out pretty well,  it will benefit from a good cleaning.

I’m debating if I should do the pallets facing but they seal well so maybe not.

@ Winston I believe I got the corners figured out now but one never knows ;)

« Last Edit: January 19, 2021, 09:07:05 PM by boxcall »
Logged
Hohner 1040 C, Beltuna one row four stop D, O'Byrne Dewitt/ Baldoni bros. D/C#, Paolo soprani "pepperpot" one row D

boxcall

  • You got to love it!!!
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1801
Re: Columbia Acc. Co. NY repair work
« Reply #26 on: January 24, 2021, 02:27:41 PM »

I took a photo of the bellows with tape removed, one showing the cloth coming loose and the other showing that the cloth has been cut to the bellow metal corners so that the metal is not on top of the cloth  (Metal corner went on first in this case). Lucky for me I guess because I want to remove and redo the cloth, although it’s going to be a pain to put it back on. I do know what I’m up against having just done this, really wasn’t that bad it just takes time.

A bit of a dampening and the tape came right off and I believe the cloth will as well.

The tape on the back side looked more blue so I imagine it was this color?
I attached a photo for comment.

These bellows are beefy in Card construction it has a cloth backing on the inside or appears to have.
« Last Edit: January 24, 2021, 02:32:24 PM by boxcall »
Logged
Hohner 1040 C, Beltuna one row four stop D, O'Byrne Dewitt/ Baldoni bros. D/C#, Paolo soprani "pepperpot" one row D

boxcall

  • You got to love it!!!
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1801
Re: Columbia Acc. Co. NY repair work
« Reply #27 on: January 24, 2021, 02:30:14 PM »

Another of the tape front and back which looks bluish.

And a photo of the spring I need to make.
Logged
Hohner 1040 C, Beltuna one row four stop D, O'Byrne Dewitt/ Baldoni bros. D/C#, Paolo soprani "pepperpot" one row D

boxcall

  • You got to love it!!!
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1801
Re: Columbia Acc. Co. NY repair work
« Reply #28 on: January 24, 2021, 04:08:00 PM »

Cloth done took about 30 minutes to remove, now to fix the corners and to put it straight .

I said earlier the card was backed with fabric , I meant the corners.
Logged
Hohner 1040 C, Beltuna one row four stop D, O'Byrne Dewitt/ Baldoni bros. D/C#, Paolo soprani "pepperpot" one row D

boxcall

  • You got to love it!!!
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1801
Re: Columbia Acc. Co. NY repair work
« Reply #29 on: February 27, 2021, 03:10:36 PM »

Well the bellows came apart easy enough, not going back together so easy this time.
I might have to drop ten and punt, in the meantime I can use them for testing as they hold air :o

I did get the reeds valved and back in the blocks ( bugger trying to wax the reeds that are even with the top of the reed block) and tested the buttons that are working, it sounded pretty good so I’ll continue on. Wasn’t that far off pitch.

I did make a couple of springs up out of spring tempered steel music wire .032 they work but not the same feel (to light). Not sure why same size wire.

So today I’m working on the pallets (some had come loose) and since I have to remove them I figured do the felt / leather on them ( I have some and it is the same thickness), no problem.
The metal arms that sit in the slot on the top of the pallet were waxed in , but the piece of (cloth?) on the top seemed to be glued. See pictures attached earlier.
So what are my options for reattaching them? Any suggestions?
1. The same method, I guess I’d wax carefully and then attach a cloth piece with glue.
2. All glue, I would have to clean the wax out of the slot and from the arm, maybe a solvent could work.
3. hot glue, not sure if this will stick to the waxed area.
Logged
Hohner 1040 C, Beltuna one row four stop D, O'Byrne Dewitt/ Baldoni bros. D/C#, Paolo soprani "pepperpot" one row D

mselic

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1683
Re: Columbia Acc. Co. NY repair work
« Reply #30 on: February 27, 2021, 03:37:52 PM »

The little piece of cloth on top of the pallets isn’t necessary, so I wouldn’t bother putting them back. Waxing (or hot gluing) the pallet arms back onto the pallets is more than sufficient.

Logged
C#/D player

Steve C.

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2075
  • Erica, Morse Anglo
Re: Columbia Acc. Co. NY repair work
« Reply #31 on: February 28, 2021, 12:57:09 PM »

Liberty Bellows may have box corners.  They don't always list all the parts they have.  Give them a call or send email.  Can be expensive.  Often I have gotten exact OEM parts from CGM even with postage to States at about the same price. (usually something they did not have anyway.)

Another place often has miscellaneous parts is Bossetto in Houston.
Logged
Located in Central North Carolina, USA; credit for picture: livingplanet.ca

boxcall

  • You got to love it!!!
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1801
Re: Columbia Acc. Co. NY repair work
« Reply #32 on: March 27, 2024, 07:08:52 PM »

Looking for advice on the bellows and or the attachment clasps.
So I ordered a set of bellows from Carini they are very close to the outside dimension of the box and should work fine, but I messed up and ordered 25mm folds when I should have ordered 30mm fold depth. I didn’t catch it until I received them.
My original bellows has 14 folds 30mm deep.
I could only get 15 folds, so I have 15 folds 25mm deep.
Trouble is the corners are thicker anyway so even if I got the right size fold (30mm) and cut off one fold, I would still be too big to allow for the bellow clasp to close in its current position or I would have to move the clasp.
I guess if I sent them out they could be duplicated.
I on the fence, I think I could make what I have work but would have to relocate clasp or maybe get a larger one?
« Last Edit: March 27, 2024, 11:35:35 PM by boxcall »
Logged
Hohner 1040 C, Beltuna one row four stop D, O'Byrne Dewitt/ Baldoni bros. D/C#, Paolo soprani "pepperpot" one row D

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Columbia Acc. Co. NY repair work
« Reply #33 on: March 28, 2024, 07:47:45 AM »

I fit new bellows quite often.  It’s very common to find the bellows straps need to be replaced because they are too short.especially on very old or cheap instruments where the original materials are thinner.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

boxcall

  • You got to love it!!!
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1801
Re: Columbia Acc. Co. NY repair work
« Reply #34 on: March 28, 2024, 01:05:24 PM »

I fit new bellows quite often.  It’s very common to find the bellows straps need to be replaced because they are too short.especially on very old or cheap instruments where the original materials are thinner.
Thanks for your input Theo, so maybe I could use the bellow I have and just find a replacement strap.
Mine is 8cm center to center of the pivot point to the snap. I will need one 1 cm longer.
Maybe Carini has something to fit ?
This is what I have it is about 10cm from snap to the attachment point ( screws) . 2cm spread between the screws.
I’m looking for something if you have a pair anyone.

Edit, I could easily move the location of the existing straps but then I’d have some holes to fill. ( doesn’t seem right to me )
« Last Edit: March 28, 2024, 01:11:33 PM by boxcall »
Logged
Hohner 1040 C, Beltuna one row four stop D, O'Byrne Dewitt/ Baldoni bros. D/C#, Paolo soprani "pepperpot" one row D

boxcall

  • You got to love it!!!
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1801
Re: Columbia Acc. Co. NY repair work
« Reply #35 on: March 29, 2024, 07:59:48 PM »

I went ahead and glued up the bellows to the frames.
And with the longer straps it should be fine.
Thanks for the advice Theo.
Logged
Hohner 1040 C, Beltuna one row four stop D, O'Byrne Dewitt/ Baldoni bros. D/C#, Paolo soprani "pepperpot" one row D
Pages: 1 [2]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal