Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Hamburg  (Read 1844 times)

0 Members and 1 Guest are viewing this topic.

Andrew Kennedy

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 184
    • About Sword Dancing
Hamburg
« on: January 17, 2021, 08:55:34 AM »

Can anyone recommend a fettler/repairer either in Hamburg or within reasonable travelling distance?
Logged

Fred

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 719
  • G/C Pariselle, D/G Loffet & maybe too many Hohners
Re: Hamburg
« Reply #1 on: January 17, 2021, 06:17:36 PM »

I do not know any fettlers in the Hamburg area (although there are certainly plenty) but depending on what you would call "travelling distance", I would recommend getting in touch with Fraton Accordions. He's located west of Berlin, so quite a drive from Hamburg but not too far that it is completely off the table.
Logged

Fred

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 719
  • G/C Pariselle, D/G Loffet & maybe too many Hohners
Re: Hamburg
« Reply #2 on: January 17, 2021, 06:28:39 PM »

A quick internet search has also revealed the following two examples in or near Hamburg:

https://www.akkordeoncentrum.de/seiten/akkordeon-service
https://www.akkordeonprofis.de/service/werkstatt/

They both state that they are "Handzuginstrumentenmacher", meaning that they are officially trained to work on free reed instruments. Without knowing any of them, I would argue that both of these shops are able to fulfill every wish a melodeon player could have. Definitely worth it to give them a call!  :||:
Logged

Andrew Kennedy

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 184
    • About Sword Dancing
Re: Hamburg
« Reply #3 on: January 18, 2021, 06:48:49 AM »

Thank you. I'll take a look.
Logged

Andrew Kennedy

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 184
    • About Sword Dancing
Re: Hamburg
« Reply #4 on: January 23, 2021, 09:24:21 AM »

Firstly, thank you Fred for the tip-off: yesterday I had a productive conversation with Ales Slivnik and  Tristen Kindel at die Akkordeon Profis - https://www.akkordeonprofis.de/ - in Norderstedt, just north of Hamburg.

I've some work which I would normally send to MikeR, but thought it better to wait until things had settled down regarding cross-border shipments.  I decided to dip a toe in the water locally with my 1950s Club IIIM, which needs a little light tuning. All was straightforward and at much the price I might have expected for the work to be done in GB.

However. I was accompanied by no. 1 son, who lives nearby and is a longstanding box player.  He's always been sceptical of my eBay habits but has now bought himself a 1930s Hohner 3-row in GCF, which inevitably needs an overhaul. 

Which takes me to my question: we were given a detailed explanation of the work to be done and shown samples of the materials to be used, and it turns out that they use rosin rather than wax to set the reeds.  I don't do any of my own fettling but was surprised to hear this.  How common is this practice elsewhere?
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Hamburg
« Reply #5 on: January 23, 2021, 10:12:37 AM »

I’ve never heard of pure rosin being used,  it would be very brittle.  Just about every wax recipe I’ve seen (and used) includes between a third and a half of rosin, with the rest being beeswax and a small amount of oil. 
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Andrew Kennedy

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 184
    • About Sword Dancing
Re: Hamburg
« Reply #6 on: January 23, 2021, 10:37:04 AM »

Ah, well maybe I misunderstood, what with the language barrier and all. He showed us his rosin supply but not his wax, but he was having a rant at the time about people who use candlewax, so he might have been emphasising the mixture.
Logged

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: Hamburg
« Reply #7 on: January 23, 2021, 10:48:57 AM »

Rees's story about a recipe from an Italian maker (one of the Castagnari family?) goes something like:

"50% beeswax, 50% resin and 10% olive oil. That's 110% so it's got to be good!"
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

rees

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5055
  • Windjammer
    • Wesson Accordions
Re: Hamburg
« Reply #8 on: January 23, 2021, 11:06:40 AM »

Rees's story about a recipe from an Italian maker (one of the Castagnari family?) goes something like:

"50% beeswax, 50% resin and 10% olive oil. That's 110% so it's got to be good!"

Gabbanelli.
Logged
Rees Wesson (accordion builder and mechanic)
Gungrog, Welshpool, Wales, UK
www.melodeons.com

Rog

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2525
  • Repair and tuning in Hants
Re: Hamburg
« Reply #9 on: January 23, 2021, 02:22:37 PM »

In the past I tried to make my own wax/rosin mixture but could never get it to work, and anyway (after encouragement from Theo) it is cheap to buy the proper Italian made stuff. Occasionally I see Galotta and the odd Weltmeister that have been factory fitted using what is obviously paraffin(candle) wax (this always surprises me).  In emergencies paraffin wax is ok. Plus I know of a UK tuner who uses a 50/50 beeswax/paraffin wax mixture...and teaches this on a PA maintenance course, which is held every now and then.

Stockaryd

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 255
Logged
Hohner Corso, Hohner Erica, Emmanuel Pariselle, Gessner,   Koch,   Mariotti,    "China  NoName",   4 Toy,     -and now some more

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: Hamburg
« Reply #11 on: January 25, 2021, 04:19:11 PM »


. . . or green
http://www.cebex.se/modellergjutvaxgront-p-6616.html?language=en&vat_disp=1&osCsid=d15bd7523e09a62d437b4053ba0143f5
I don't think this would be suitable for securing reeds to reed blocks; at least I wouldn't risk trying it.

However, as far as I recall, it was the tuner/fettler Niels Nielsen who used to add a green dye of some sort to his reed wax. You could always tell which instruments he had worked on.
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

Andrew Kennedy

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 184
    • About Sword Dancing
Re: Hamburg
« Reply #12 on: February 23, 2021, 02:44:40 PM »

Well, this morning I picked up my Club IIIM from Die Akkordeon Profis in Norderstedt, just outside Hamburg.  It's a late '50s model, I think (grille looks like a 1950s wireless set rather than like an Erica), which came from eBay, and it must have had work done in the not-too-distant past because the wax and valves were fine.  It just needed tuning, as I found the outer (C) row a bit dodgy.  While it was there they also re-taped the back and underside of the bellows; yes, I've read all the discussions about doing it oneself and that's not a job I could hope to complete without doing something awful to it on the way.

The result is glorious and the chaps were lovely to deal with, so thank you Fred for pointing them out to me.  I mentioned that it came from eBay and it's possible that it was a little grimy, as I was told "I've cleaned it up a little and now it looks a lot better".  There was something about the way that was said, and next time I'll clean any melodeon rigorously before taking it in.

I would normally have gone to a British fettler, but current Covid travel difficulties prevent me from going in person and I wanted to wait until everything settled down after Brexit before attempting to post it.  So here's my next question: I'm concerned about posting a box from Germany to a workshop in Britain and getting it sent back when finished. Will I have to pay import duty in both directions and then try to reclaim it after the event?
Logged
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal