Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: reeds quality  (Read 1410 times)

0 Members and 1 Guest are viewing this topic.

dino.pafftti

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 464
reeds quality
« on: January 20, 2021, 09:32:21 AM »

i would be interested to know the current 2-rows reeds ,, ( Quality )
Reeds come in many different quality ..
The ads often do not tell you what the reeds the accordion is
I interested to know if everything tipo a mano quality
or whether machine reeds and super dural reeds are also used in the new boxes ??
Logged

-Y-

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 896
  • Handry 18 (G/C), Mélodie (D), Club IIb (A/D)
    • a database of nearly 500 melodeons here
Re: reeds quality
« Reply #1 on: January 20, 2021, 10:45:16 AM »

Hello,
I've not all the accordions in the world but, I've got a few in my database, so I did the attached graphics: it's the repartition of reed quality for 2 rows and 2 rows +2 buttons. Plenty of unknown reed quality (which I suspect to be dural, on the whole), as the information was not freely available on the manufacturers' websites, but it gives a fair overview I think. Data calculated on 192 accordions.

dino.pafftti

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 464
Re: reeds quality
« Reply #2 on: January 20, 2021, 10:58:23 AM »

Hello,
I've not all the accordions in the world but, I've got a few in my database, so I did the attached graphics: it's the repartition of reed quality for 2 rows and 2 rows +2 buttons. Plenty of unknown reed quality (which I suspect to be dural, on the whole), as the information was not freely available on the manufacturers' websites, but it gives a fair overview I think. Data calculated on 192 accordions.

Thank you very much!
this is good graphics ,, it says a lot  (:)
Logged

diatonix

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 622
Re: reeds quality
« Reply #3 on: January 20, 2021, 12:09:08 PM »

20% a mano?? 2% is more likely, but still a rather optimistic guess.
Logged

-Y-

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 896
  • Handry 18 (G/C), Mélodie (D), Club IIb (A/D)
    • a database of nearly 500 melodeons here
Re: reeds quality
« Reply #4 on: January 20, 2021, 12:21:27 PM »

That's not a guess, that's what I gathered from the makers' catalogues. Of course there can be errors when feeding the database, or makers lying.
I can provide the data sheets if need be.

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: reeds quality
« Reply #5 on: January 20, 2021, 12:48:11 PM »

Unfortunately many catalogues list the reed quality as "handmade" in English when they mean tipo a mano.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Eshed

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 447
Re: reeds quality
« Reply #6 on: January 20, 2021, 12:50:13 PM »

20% a mano?? 2% is more likely, but still a rather optimistic guess.
Note that it's 20% of the models, not 20% of the boxes.
Logged
Do you have a Hohner from 1934-1945 with a serial number on?
Send me a private message or comment on the German Accordion Problem spreadsheet to improve the statistics of the project and get an estimate of the production date of the box if it is not known.

-Y-

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 896
  • Handry 18 (G/C), Mélodie (D), Club IIb (A/D)
    • a database of nearly 500 melodeons here
Re: reeds quality
« Reply #7 on: January 20, 2021, 01:19:44 PM »

After a check, models for which I'm unsure because of the vagueness of the "handmade" designation, I would be at 16-17% of models for AM reeds. Allowing for a margin of error would drop at 12% I guess. Still a lot higher than 2%.
And I'm missing makers (diatonix for instance  :D).

Note that it's 20% of the models, not 20% of the boxes.

The percentage stays roughly the same for all the other boxes in the database. It's even higher, but as there may be also vague information available on the reed quality for models where the data was displayed in English, it's nearing the 20% anyways.
« Last Edit: January 20, 2021, 01:41:02 PM by -Y- »
Logged

Michael Driscoll

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 145
Re: reeds quality
« Reply #8 on: January 21, 2021, 09:37:49 AM »

Hello, I did the attached graphics: it's the repartition of reed quality for 2 rows and 2 rows +2 buttons.

Interesting bar chart.  There is a recent thread on reed quality on which I enquired about available information -

 "Has anyone produced a comparison of the different reed makes and types and produced it in a simple way as a guide that might be a starting point?"

- to which surprisingly (to me) produced zilch response. Keep the information coming.
« Last Edit: January 21, 2021, 09:42:39 AM by Michael Driscoll »
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: reeds quality
« Reply #9 on: January 21, 2021, 10:15:16 AM »

Michael, I think that is because there isn't a simple answer to that question.

Here is a very general list of the main reed types in order of increasing quality.  There are more but you asked for basic:

Machine made; dural; tipo a mano; a mano

But the distinctions between them are not that straightforward because over the years the processes and material used for reed making have changed.  For example the reeds used in many wonderful Paolo Soprani boxes are machine made, but they are highly prized for their playing qualities.   At the opposite end of the "quality" range are some reeds describes as "a mano" and they have all the visible features of a mano, but they play like porridge.  The only way you can really judge reed quality is by playing them.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Michael Driscoll

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 145
Re: reeds quality
« Reply #10 on: January 21, 2021, 11:17:04 AM »

Theo, Thanks for basic description of the 'types' and insight into this with a 'suck it and see' approach. Comment on the 'makes' would be useful also. I suppose that anyone expressing an opinion might incur the wrath of the manufacturers, although one could argue fair comment. I did want 'basic' information as a starting point in the realisation that quality was a complex and subjective topic.
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: reeds quality
« Reply #11 on: January 21, 2021, 11:22:26 AM »

When it comes to differences between makes it's much more a case of which sound your prefer, rather than which is "better".
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

dino.pafftti

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 464
Re: reeds quality
« Reply #12 on: January 21, 2021, 03:27:20 PM »

this is interesting (:) i have little knowledge about the properties of reeds ,, i play poorly but i like fixing the old ones,
Hard to choose reeds,,  ::)
Logged
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal