Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1] 2   Go Down

Author Topic: Converting a Hohner Club II CF to GC advice needed!  (Read 4151 times)

0 Members and 2 Guests are viewing this topic.

boscaceol

  • Good talker
  • **
  • Offline Offline
  • Posts: 70
Converting a Hohner Club II CF to GC advice needed!
« on: January 21, 2021, 08:14:51 PM »

This old Hohner is in a poor state but not beyond repair depending on how I willing to spend on it!  I need your advice on if its possibe to retune the F row to G or if the difference is too much,  I also have a broken GF reed that needs replaced on the F row plus two additional reeds will be needed at add to the 'new' G row, therefore 1 off G/A reed and 2 off D/A reeds. 
If the answer is that I need to get a complete set of reeds for the G scale, does anyone have a set of Hohner reeds for sale?
Logged
GC Saltarelle, self build GC Pariselle

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Converting a Hohner Club II CF to GC advice needed!
« Reply #1 on: January 21, 2021, 08:25:20 PM »

The reeds from the F row would have to go down nearly an octave to the G below for the G row of a GC
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Rog

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2525
  • Repair and tuning in Hants
Re: Converting a Hohner Club II CF to GC advice needed!
« Reply #2 on: January 22, 2021, 05:12:00 AM »

I always try to source a replacement set of reeds before converting. It might be worth a 'wanted' request in buy and Sell.

Willem Feltkamp

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 129
  • Tinkering and playing diatonics and CBA
Re: Converting a Hohner Club II CF to GC advice needed!
« Reply #3 on: January 24, 2021, 04:19:41 PM »

Hi guys,

I just joined this forum and it's already lots of fun! Not only did I find information about the age and name of various Hohner Club boxes, but here I'm stumbling on the same project I'm looking to do: convert a Club III M CF to GC.
But before I start, can anyone tell me: Will the new reed plates fit into the reed blocks, supposing I keep the original Club layout?
As their tone is lower, I expect them to be bigger.
The same for the bass side.

Thanks for letting me know! Willem
Logged

Tone Dumb Greg

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4955
    • Dartmoor Border Morris
Re: Converting a Hohner Club II CF to GC advice needed!
« Reply #4 on: January 31, 2021, 11:20:26 AM »

The box you want to modify sounds like it might be a bit of a gem, from your description. I can't help wondering if you would be better off enjoying the delights of your CF "Wurlitser"  in it's present form and, possibly, looking to indulge your MADness by buying a GC box. There seem to be plenty around.

However, so far as the reed plates being bigger goes, a bit of judicious woodwork, with a Stanley knife or scalpel, is possibly, all that may be needed. You would need to compare the plates before cutting, though.
Logged
Greg Smith
DG/GC Pokerwork, DG 2.4 Saltarelle, pre-war CF Hohner, Hohner 1040 Vienna style, old  BbEb Hohner that needs a lot of work.

ACCORDION, n. An instrument in harmony with the sentiments of an assassin. Ambrose Bierce

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: Converting a Hohner Club II CF to GC advice needed!
« Reply #5 on: January 31, 2021, 02:35:58 PM »

The box you want to modify sounds like it might be a bit of a gem, from your description. I can't help wondering if you would be better off enjoying the delights of your CF "Wurlitser"  in it's present form and, possibly, looking to indulge your MADness by buying a GC box. There seem to be plenty around.

However, so far as the reed plates being bigger goes, a bit of judicious woodwork, with a Stanley knife or scalpel, is possibly, all that may be needed. You would need to compare the plates before cutting, though.
I'm with Greg on this one. Leave the C/F Club III as it is. It's too nice to scrap just to harvest rhe reeds. If you want G/C box to play French bal dance music, you'd be better off getting a French or Italian instrument already in G/C tuning. The sound would be more authentic.
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

Willem Feltkamp

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 129
  • Tinkering and playing diatonics and CBA
Re: Converting a Hohner Club II CF to GC advice needed!
« Reply #6 on: February 01, 2021, 05:44:37 PM »

The box you want to modify sounds like it might be a bit of a gem, from your description. I can't help wondering if you would be better off enjoying the delights of your CF "Wurlitser"  in it's present form and, possibly, looking to indulge your MADness by buying a GC box. There seem to be plenty around.

However, so far as the reed plates being bigger goes, a bit of judicious woodwork, with a Stanley knife or scalpel, is possibly, all that may be needed. You would need to compare the plates before cutting, though.

The only G/C three voice Hohners I see are Coronas, and their bass layout prohibits using F/C fingering.
I agree the French and Italian boxes are more authentic sounding, but in versions with three voices and having  a row of accidental notes these boxes cost about six to ten times the cost of a Hohner Club III M.
I had a peek on the German Ebay pages and my mouth started watering; it's ubelievable how many of these boxes are around for low prices.
I wouldn't demolish my own one just for the reeds.
For now I'll probably buy a two voice Erica G/C
Logged

-Y-

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 896
  • Handry 18 (G/C), Mélodie (D), Club IIb (A/D)
    • a database of nearly 500 melodeons here
Re: Converting a Hohner Club II CF to GC advice needed!
« Reply #7 on: February 01, 2021, 06:06:26 PM »

Wouldn't commissioning someone to make new reed blocks suited to a G/C reeds set be an option that would be some kind of "middle ground" in terms of budget and keeping the Club as original as possible, with the option to go back to C/F if need be?

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Converting a Hohner Club II CF to GC advice needed!
« Reply #8 on: February 01, 2021, 06:10:11 PM »

I think your Club IIIM will make a fine GC. Hohner missed an opportunity when they decided to make the IIIM only in CF.   There are relatively large numbers of this model about and the low prices indicate that few people want them. I have tried to sell this model in the UK and found few buyers.  It's not a rare item and in your position I would be doing the same.   I wouldn't be making new reed blocks either as this will make the project much more expensive. 
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Squeaky Pete

  • Squeaky Pete
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1327
  • Re-hohn a Hohner
Re: Converting a Hohner Club II CF to GC advice needed!
« Reply #9 on: February 01, 2021, 06:34:35 PM »

I am turning a scabby dirt cheap Hohner LMM club from a 30 button standard layout CF to a GCAcc 33 button full 3 row at the moment
It's certainly doable though there are a few reeds that really won't be usable.
Logged
Poker work DG.
Pariselle 2.6 DG, Ex-Club IIIBS CF,
Matching Liliputs in CF and DG,
Lots of sickly Hohners needing TLC,
Bassoon, Various Bagpipes........

Willem Feltkamp

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 129
  • Tinkering and playing diatonics and CBA
Re: Converting a Hohner Club II CF to GC advice needed!
« Reply #10 on: February 03, 2021, 01:11:42 PM »

I think your Club IIIM will make a fine GC. Hohner missed an opportunity when they decided to make the IIIM only in CF.   There are relatively large numbers of this model about and the low prices indicate that few people want them. I have tried to sell this model in the UK and found few buyers.  It's not a rare item and in your position I would be doing the same.   I wouldn't be making new reed blocks either as this will make the project much more expensive.
Right, why go through the trouble of making reed blocks when you can buy them inside an instrument for around € 200?
The only thing I'm worried about is how to get the right bass reed plates. Or is this a matter of soldering lumps onto the reeds or grinding these to the desired tone?
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Converting a Hohner Club II CF to GC advice needed!
« Reply #11 on: February 03, 2021, 01:21:43 PM »

Right, why go through the trouble of making reed blocks when you can buy them inside an instrument for around € 200?
The only thing I'm worried about is how to get the right bass reed plates. Or is this a matter of soldering lumps onto the reeds or grinding these to the desired tone?

It is possible to retune bass and chord reeds.  It takes a bit of practice and you will probably wreck a few reed while you are learning.  The basic approach I use is to lay out all the reeds so you can see what you have.  Then make a chart of all the pitches you have, and a second chart of all the pitches you need.  There will be some reeds that you just need to move to a new position without any re-tuning.  For example CF bass includes C/G bass and chord which just have to be moved to a new position.  For others try and minimise the amount you have to change the pitch by.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Willem Feltkamp

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 129
  • Tinkering and playing diatonics and CBA
Re: Converting a Hohner Club II CF to GC advice needed!
« Reply #12 on: February 03, 2021, 02:02:57 PM »

Thanks for the advice Theo! I'm looking forward to this job! just bought a scrap Club harmonica, no idea which tuning but the bellows seems beyond repair so I'll have lots of reeds and with a bit of luck a few bass reeds I can use.
I'm also buying a second club III M so I can keep the other one in CF.
Logged

Willem Feltkamp

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 129
  • Tinkering and playing diatonics and CBA
Re: Converting a Hohner Club II CF to GC advice needed!
« Reply #13 on: March 26, 2021, 08:15:26 AM »

I'm abandoning the project of converting a Club III M CF to GC. I'm currently doing a complete overhaul of a pre-war two voice club, and already the amount of work is huge (and occasionally pretty tedious). The idea that I would have to change tone chamber dimensions to fit reed plates also doesn't appeal to me. Also the plan for swapping reed plates is a kind of Chinese puzzle. All in all it feels as if I would be trying to make a cat bark.
Logged

John MacKenzie (Cugiok)

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2360
  • Fettling... Learning to reed and right.
Re: Converting a Hohner Club II CF to GC advice needed!
« Reply #14 on: March 26, 2021, 03:20:06 PM »

Pre Corso was available in G/C wasn't it? That's if you're still looking for a 3 voice G/C.

Sir John
Logged
There is no beginning to my talent :)



: Hohner Club Modell 1. Bb/Eb, de-clubbed : Early Hohner Pressed Wood A/D : 1930's Varnished wood G/C:  Hohner Erika C/F: Bandoneon tuned D/G Pressed wood: Koch F/Bb; G/C Pre Corso

Willem Feltkamp

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 129
  • Tinkering and playing diatonics and CBA
Re: Converting a Hohner Club II CF to GC advice needed!
« Reply #15 on: March 28, 2021, 09:03:09 AM »

I wouldn't know. There's the Corona, but the bass layout of that instrument would need to be changed.
I might do that, since it seems a lot more doable than changing CF to GC.
Logged

Willem Feltkamp

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 129
  • Tinkering and playing diatonics and CBA
Re: Converting a Hohner Club II CF to GC advice needed!
« Reply #16 on: March 05, 2022, 01:25:05 PM »

I've just started out converting a Hohner club III C/F to G/C, because I like the idea of the row with extra notes (I'll have to figure out which notes would suit me best).
After having concluded this job would be too much work about a year ago (even just solving the chinese puzzle of changing reed positions so that minimal retuning is necessary) I thought why not just start.
I've mapped all buttons to their position on the reed blocks, and I've taken out all the reed plates.
Since the box is three voice, I thought I might use the 16' reeds for the G row. So I'm aiming for a two voice (twice 8') first, and after I managed that I might try filling the 16' block with altered chromatic accordion reeds.
I'm a bit apprehensive of how many reed chambers I will have to enlarge, but I'll find out soon enough.
In the meanwhile I could use some advice on rewaxing, since the space between the reed plates is so small that my waxing spoon will probably spill a lot of wax in the wrong places. Maybe grinding a millimetre from the side of the reed plates would create more room for waxing?
Logged

Willem Feltkamp

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 129
  • Tinkering and playing diatonics and CBA
Re: Converting a Hohner Club II CF to GC advice needed!
« Reply #17 on: March 05, 2022, 01:26:03 PM »

ps I may have accidentally posted this same text in another thread I started.
Logged

Winston Smith

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4066
  • AKA Edward Jennings
    • "Our Luxor B&B" Luxor life, slice by slice.
Re: Converting a Hohner Club II CF to GC advice needed!
« Reply #18 on: March 05, 2022, 02:37:20 PM »

"I could use some advice on rewaxing"

A tip which Theo gave me when I was first working on a Liliput was that it made the job a lot more simple to wax the open edge of the reed before putting the next reed into place while the wax was still warm. It certainly did make the job easier and far less messy!
Logged
At last, broken and resigned to accept conformity.
Oh, how I LOVE Big Brother!

Willem Feltkamp

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 129
  • Tinkering and playing diatonics and CBA
Re: Converting a Hohner Club II CF to GC advice needed!
« Reply #19 on: March 06, 2022, 11:36:19 AM »

Winston, thanks for the tip on waxing!
Logged
Pages: [1] 2   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal