Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: 1 [2]   Go Down

Author Topic: Converting a Hohner Club II CF to GC advice needed!  (Read 4130 times)

0 Members and 1 Guest are viewing this topic.

Willem Feltkamp

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 129
  • Tinkering and playing diatonics and CBA
Re: Converting a Hohner Club II CF to GC advice needed!
« Reply #20 on: March 06, 2022, 11:39:20 AM »

Day two of the project 'converting a hohner club c/f to a g/c with extra notes' was a sobering experience.
I found out my approach of simply removing al reed plates and then start putting them back in their new positions was not really smart.
First of all, I had to ping each reed to determine the pitch, which I then wrote on both sides of the reed plate with pencil.
I could have easily written the note names on the reed plates before I removed them, which would have saved a lot of time.
Second, with all removed reed plates in a big pile, there was no knowing which of them were 'just tuned' and which higher.
However, this turned out not to be my biggest problem.
My idea of using the 16'reed plates for the G row did not take into account that there is only one reed plate for every note, so the second voice is missing.
Apart from that, I found only four reed plates I could use without retuning.
Only 22 reed plates in total could be used without retuning, of the minimum of 42 needed for two rows, two voices.
The c row of the G/C is no problem. But it turns out that the F row of a CF and the G row of a GC only have only the gc reed plate in common.
On top of this, I found quite a number of reeds had been tuned by removing material a litte below halfway the reed instead of near the bottom. This will very like have an adverse effect on the functioning of the reeds.
I'll try to estimate how much retuning I will need to do, but I guess it will lead to me looking for a new set of reeds.
But first I'll have a look at the bass side in case I need to order new reeds for that as well.
Logged

Tone Dumb Greg

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4955
    • Dartmoor Border Morris
Re: Converting a Hohner Club II CF to GC advice needed!
« Reply #21 on: March 06, 2022, 11:55:03 AM »

In spite of what some think and say,  CF is a great key to play in and deserves to be more common. Just saying.
Logged
Greg Smith
DG/GC Pokerwork, DG 2.4 Saltarelle, pre-war CF Hohner, Hohner 1040 Vienna style, old  BbEb Hohner that needs a lot of work.

ACCORDION, n. An instrument in harmony with the sentiments of an assassin. Ambrose Bierce

Willem Feltkamp

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 129
  • Tinkering and playing diatonics and CBA
Re: Converting a Hohner Club II CF to GC advice needed!
« Reply #22 on: March 09, 2022, 08:28:51 AM »

Hi Greg,
In the Netherlands everybody plays CF. But the reason I'm looking for GC is that for some reason all Balfolk players play GC.
So if I want to play along or take courses I need a GC box.
I have a wonderful Polverini/Victoria CF which I use for Irish tunes in D minor/dorian.

Logged

Rog

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2525
  • Repair and tuning in Hants
Re: Converting a Hohner Club II CF to GC advice needed!
« Reply #23 on: March 09, 2022, 09:32:38 AM »

Don’t be put off by 'pinging' the reeds. It’s the best way to get them in order, and you can normally distinguish the 'just' and sharp reeds in a pair.

Tone Dumb Greg

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4955
    • Dartmoor Border Morris
Re: Converting a Hohner Club II CF to GC advice needed!
« Reply #24 on: March 09, 2022, 10:23:26 AM »

I understand why you want a GC. I bought a set of Hohner GC reed blocks for a similar reason (cost me £100, which didn't seem excessive). I'm just  suggesting you keep an open mind on solutions. It might be easier and cheaper to buy a GC to be your starting point. They come up for sale pretty often.

[This Corso looks good
http://forum.melodeon.net/index.php?topic=27901.0]
« Last Edit: March 09, 2022, 05:13:38 PM by Tone Dumb Greg »
Logged
Greg Smith
DG/GC Pokerwork, DG 2.4 Saltarelle, pre-war CF Hohner, Hohner 1040 Vienna style, old  BbEb Hohner that needs a lot of work.

ACCORDION, n. An instrument in harmony with the sentiments of an assassin. Ambrose Bierce

Willem Feltkamp

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 129
  • Tinkering and playing diatonics and CBA
Re: Converting a Hohner Club II CF to GC advice needed!
« Reply #25 on: March 13, 2022, 01:09:56 PM »

Hi Greg,

the reed blocks you bought sound like a good deal!
But I'm afraid I've painted myself in a corner by taking a three voice Club LMM as my starting point. I suppose the reed blocks of this instrument are not interchangeble with other models.
I may have a look on German Ebay; there are tons of Hohners for sale there (and no Brexit hassle when importing).
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Converting a Hohner Club II CF to GC advice needed!
« Reply #26 on: March 13, 2022, 03:27:33 PM »

The reed blocks may not be interchangeable but the reeds are.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Willem Feltkamp

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 129
  • Tinkering and playing diatonics and CBA
Re: Converting a Hohner Club II CF to GC advice needed!
« Reply #27 on: March 16, 2022, 12:19:14 PM »

Hi Theo,

What about the 16' reeds? If they sound an octave below the already pretty low G row reeds, will they not be too big/long for the original 16' reed block?
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Converting a Hohner Club II CF to GC advice needed!
« Reply #28 on: March 16, 2022, 01:17:25 PM »

You will just have to try them.  I didn’t know you were lowering pitch by an octave.
« Last Edit: March 16, 2022, 01:20:15 PM by Theo »
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Squeaky Pete

  • Squeaky Pete
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1327
  • Re-hohn a Hohner
Re: Converting a Hohner Club II CF to GC advice needed!
« Reply #29 on: March 16, 2022, 01:48:29 PM »

I recently rebuilt a Club IV CF as a GC box
I didn't have any trouble with the L reeds, but like me you will have to load the lowest ones with solder if you want to fit to the existing blocks.
Logged
Poker work DG.
Pariselle 2.6 DG, Ex-Club IIIBS CF,
Matching Liliputs in CF and DG,
Lots of sickly Hohners needing TLC,
Bassoon, Various Bagpipes........

Tone Dumb Greg

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4955
    • Dartmoor Border Morris
Re: Converting a Hohner Club II CF to GC advice needed!
« Reply #30 on: March 16, 2022, 01:55:18 PM »

Are you doing a plan of what you intend to have against what you've got, to identify your needs? Start point and end point. It can save a lot of grief to know exactly what you've got and exactly what you need. e.g., layout before and after. Reed plan by block, before and after (with tone, pitch and physical size).
Good photographs can help.
Logged
Greg Smith
DG/GC Pokerwork, DG 2.4 Saltarelle, pre-war CF Hohner, Hohner 1040 Vienna style, old  BbEb Hohner that needs a lot of work.

ACCORDION, n. An instrument in harmony with the sentiments of an assassin. Ambrose Bierce

Winston Smith

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4066
  • AKA Edward Jennings
    • "Our Luxor B&B" Luxor life, slice by slice.
Re: Converting a Hohner Club II CF to GC advice needed!
« Reply #31 on: March 16, 2022, 03:22:04 PM »

In one of my Frankenstein conversions, I had to alter the blocks significantly. Not being a clever woodworker or having the clever woodworker's tools, I ended up sawing the top off the reed block altogether and gluing on another bit of wood, then carving out the new bit to suit the length of the 'new' reedplates. I was quite chuffed (and surprised!) when it all eventually worked.
Logged
At last, broken and resigned to accept conformity.
Oh, how I LOVE Big Brother!

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Converting a Hohner Club II CF to GC advice needed!
« Reply #32 on: March 16, 2022, 04:00:17 PM »

That sounds to me like clever woodwork!
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Winston Smith

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4066
  • AKA Edward Jennings
    • "Our Luxor B&B" Luxor life, slice by slice.
Re: Converting a Hohner Club II CF to GC advice needed!
« Reply #33 on: March 16, 2022, 04:44:56 PM »

What? With a scalpel, an old 1/4 chisel and a lot of guesswork? You must be easily pleased, you daft beggar!
Logged
At last, broken and resigned to accept conformity.
Oh, how I LOVE Big Brother!

Pete Dunk

  • Typo Expert
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3706
Re: Converting a Hohner Club II CF to GC advice needed!
« Reply #34 on: March 16, 2022, 10:41:13 PM »

Might I venture to suggest that Theo is hardly ‘easy to please’!
« Last Edit: March 16, 2022, 10:44:00 PM by Pete Dunk »
Logged
Squeezing on the Isle of Oxney, UK
Primo (Serenellini) D/G
Isis D/G
Hohner B/E, G/C, C/F, Bb/Eb G/C/F
Liliputs D/G (G scale), C/F, Bb/Eb, Albrecht Custom D/G (G scale)

Winston Smith

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4066
  • AKA Edward Jennings
    • "Our Luxor B&B" Luxor life, slice by slice.
Re: Converting a Hohner Club II CF to GC advice needed!
« Reply #35 on: March 17, 2022, 11:30:22 AM »

Yes, I'm aware of that, Pete. I've tried to get him to do a 'half-job' for me several times, in order to save money; big mistake!! Everything has to be right, or he doesn't want to know. Of course, his reputation is built on 'proper' work, so I wouldn't blame him at all.
(Mind, he knows that I was just pulling his leg, anyway.)
Logged
At last, broken and resigned to accept conformity.
Oh, how I LOVE Big Brother!

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Converting a Hohner Club II CF to GC advice needed!
« Reply #36 on: March 20, 2022, 02:24:44 PM »

All taken in the right spirit Winston!

But seriously if I or anyone want to tune a set of reeds then everything else must be ready.  So valves in good order, waxing fairly neat so there is absolutely no wax near the reed tongues.  If you fit new valves be careful when gluing.  Too much can squeeze out and get in to the adjacent reed, too little and valves will start falling off in the near future. Reeds should be pre-tuned to within 10 cents of the target pitch, and pairs of reeds should be the same size and all should be of similar type.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Willem Feltkamp

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 129
  • Tinkering and playing diatonics and CBA
Re: Converting a Hohner Club II CF to GC advice needed!
« Reply #37 on: October 15, 2022, 12:51:55 PM »

Hi guys,

I gave up on the conversion. Repaired the holes that I enlarged for the bigger reed plates and got me a DG since I play mostly Irish now.
Now the unattractive task is awaiting of putting everything together again and ending up where I began.
On the positive side I will have gained experience once the machine is back in one piece and tuned.
With hindsight the idea was a bit silly to begin with, unless you're really into a lot of zen handiwork...
Logged

Winston Smith

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4066
  • AKA Edward Jennings
    • "Our Luxor B&B" Luxor life, slice by slice.
Re: Converting a Hohner Club II CF to GC advice needed!
« Reply #38 on: October 15, 2022, 01:13:13 PM »

"With hindsight the idea was a bit silly to begin with"

Don't worry about it! I guess that most of us "handymen" have made similar bad judgements before now. I'm thankful to say that most of those of mine which have ended up in the scrap bin have been old black Klingenthal things, or bits of Hohner's which were temporarily saved from the same place.

Innovation and modification always have casualties somewhere along the line!
Logged
At last, broken and resigned to accept conformity.
Oh, how I LOVE Big Brother!
Pages: 1 [2]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal