Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: air valves on Single Row Hohner  (Read 1282 times)

0 Members and 1 Guest are viewing this topic.

Little Eggy

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 843
air valves on Single Row Hohner
« on: January 23, 2021, 03:26:02 PM »

Flushed with success at resurfacing the treble side pallets on my Hohner I started playing and got this strange sort of residual ringing after-noise on one of the keys.  Also noticed the same note playing when I pulled on the bellows without the air button down.  Obviously the air was getting in somehow.

Looking at the valves the offending vinyl valve is actually completely loose and on 'upside down'(or should I say back to front).  What glue should be used to re attach it - if that's the answer??

Also noticed that there are no vinyl valves at all over the highest four notes, and yet the notes seem to play OK on the rare occasions I'm likely to need them.  Is this something to do with the physics of the thing?
Logged

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: air valves on Single Row Hohner
« Reply #1 on: January 23, 2021, 03:36:35 PM »

I use Evo Stick Impact applied to the valve and then stick in place.


It is typical for the higher reeds to have no valves.

Winston Smith

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4066
  • AKA Edward Jennings
    • "Our Luxor B&B" Luxor life, slice by slice.
Re: air valves on Single Row Hohner
« Reply #2 on: January 23, 2021, 03:42:55 PM »

I'm sure some will advise against this, but I've recently started using Gorilla Gel Superglue. It's great to use, I just run a tiny line around the plate where the valve will make contact and it doesn't run away to where you don't want it, it's not messy at all and there's no waste.
Logged
At last, broken and resigned to accept conformity.
Oh, how I LOVE Big Brother!

Little Eggy

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 843
Re: air valves on Single Row Hohner
« Reply #3 on: January 23, 2021, 04:05:18 PM »

Thanks guys.

Winston I see you’ve come to love Big Brother.
Resistance against the Borg is futile, you have been assimilated.
Logged

diatonix

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 622
Re: air valves on Single Row Hohner
« Reply #4 on: January 23, 2021, 04:38:01 PM »

This is a pallet issue and has nothing to do with your vinyl valves.
« Last Edit: January 23, 2021, 04:43:33 PM by diatonix »
Logged

Little Eggy

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 843
Re: air valves on Single Row Hohner
« Reply #5 on: January 23, 2021, 04:47:19 PM »

This is a pallet issue and has nothing to do with your vinyl valves.

Well I may have described the problem incorrectly, because now that I have glued the vinyl valve in place I'm not getting the strange afternote/ resonance/ blowing sound; and I can't draw the bellows unless the air button is pressed.
Logged

Peadar

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2039
Re: air valves on Single Row Hohner
« Reply #6 on: January 23, 2021, 04:50:16 PM »

Air flows through the reed plate and wakes the reed on the inflow side as it does so- as the reed tip gets pulled down toward the plate and into it the gap gets narrower and a pressure difference develops between the two faces of the reed which pulls the reed in further - until the reed springs back.....which for your low G reed on the DG takes about 1/1600th of a second. Air going the other way would just push the reed further off the plate, widening the air gap so air just leaks round the reed preventing a pressure difference from building up.
What the air valves do is prevent that leakage.
The highest reeds are much shorter than the others and so they have smaller air gap areas - which comes down to less air consumption to sound the reed. Omitting air valves on these reeds allows leakage which in turn compensates for the small air consumption of the sounding reed, so the bellows action doesn't feel too different when playing high notes.

I like the sound of evo-stik - that 'll be the interesting smelling brown stuff, beloved of 1980's glue sniffers? It has a rubbery consistency when it is set and can be peeled off metal surfaces fairly easily if things go horribly wrong.

This is a pallet issue and has nothing to do with your vinyl valves.

Well I may have described the problem incorrectly, because now that I have glued the vinyl valve in place I'm not getting the strange afternote/ resonance/ blowing sound; and I can't draw the bellows unless the air button is pressed.
That sounds like a win....and as revalving is the next job on my Excelsior I am grateful for this thread. I just hope that my Evo-stik tube hasn't gone hard inside.
« Last Edit: January 23, 2021, 04:55:32 PM by Peadar »
Logged

Little Eggy

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 843
Re: air valves on Single Row Hohner
« Reply #7 on: January 23, 2021, 05:16:15 PM »

Ooh an Excelsior.  They had one of those in Hobgoblin a while back and I was sorely tempted because it played like a dream.
Give us a tune when you've fixed it!
Logged

diatonix

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 622
Re: air valves on Single Row Hohner
« Reply #8 on: January 23, 2021, 08:29:03 PM »

If you can hear a reed without touching any buttons (at least this is how I understood your initial message) it can ONLY be caused by a leaking pallet.
Logged

rees

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5055
  • Windjammer
    • Wesson Accordions
Re: air valves on Single Row Hohner
« Reply #9 on: January 23, 2021, 08:46:29 PM »

If you can hear a reed without touching any buttons (at least this is how I understood your initial message) it can ONLY be caused by a leaking pallet.

There is no other explanation. Check the pallet.
I'm not saying that the valve was not faulty but that's a different issue. For a note to sound without depressing buttons it's a pallet leak.
Logged
Rees Wesson (accordion builder and mechanic)
Gungrog, Welshpool, Wales, UK
www.melodeons.com

Little Eggy

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 843
Re: air valves on Single Row Hohner
« Reply #10 on: January 23, 2021, 09:30:28 PM »

Just checked again.  When I pull quite hard on the bellows with no button or air button pressed there is clearly air getting in and after about 2” there’s a wheeze on the note which had the faulty valve.

I think this was what confused me.  Before I fixed the valve there was a very clear note.  It’s nothing like that now, in fact it seems to be playing OK. 

I will give it a tougher work out tomorrow and see what it sounds like.  I will also try pulling on the bellows of my other boxes.

Thanks for the comments guys.

Logged

Little Eggy

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 843
Re: air valves on Single Row Hohner
« Reply #11 on: January 24, 2021, 10:00:03 AM »

It seems to have settled a bit overnight.  If I pull quite hard with no buttons pressed the bellows open a few inches. (All 4 of my boxes will do this if you pull really hard).  But I'm not getting any tone at all through any of the valves.  So some air is getting in, I guess that could be from anywhere along the bellows or frame.

But it's playing nicely and I'm quite pleased with my resurfacing work.

https://youtu.be/1WaqUTTKq7g
Logged

Peadar

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2039
Re: air valves on Single Row Hohner
« Reply #12 on: January 24, 2021, 11:02:03 AM »

That looks and sounds pretty good to me. Settling in of a leather valve or valve face doesn't surprise me - conformance (yield) over time is one of the properties of leather (and other organic materials including wood) under loading (stress).
Logged
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal