Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: 1 [2] 3   Go Down

Author Topic: Hohner waxing spoon design  (Read 3747 times)

0 Members and 1 Guest are viewing this topic.

Tone Dumb Greg

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4955
    • Dartmoor Border Morris
Re: Hohner waxing spoon design
« Reply #20 on: January 27, 2021, 09:38:04 PM »

... I also gave up making the wax and now buy the Italian made stuff.  I have to add though, that for quick jobs Charlie Marshall's wax sticks are really excellent! Somebody gave me some and I’m a real convert.

Charlie Marshall's wax is Italian made. Maybe that's why you liked them.
Logged
Greg Smith
DG/GC Pokerwork, DG 2.4 Saltarelle, pre-war CF Hohner, Hohner 1040 Vienna style, old  BbEb Hohner that needs a lot of work.

ACCORDION, n. An instrument in harmony with the sentiments of an assassin. Ambrose Bierce

Peadar

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2039
Re: Hohner waxing spoon design
« Reply #21 on: January 27, 2021, 10:57:25 PM »

Beeswax melts at around 80-90C, rosin melting point is a bit over 100C.   Accordion wax blend melting at a little below 100C.

ah ok....that kind of explains why maybe those £30 wax pots are a bit rubbish. i tried mine on just over half way on the thermostat and it smoked and discoloured the wax (which i assumed was because it was getting too hot) but sounds like it wasn't getting hot enough or the thermostat or max temp spec. is a bit rubbish. anyway i gave up on it and went back to wax sticks. sounds like you just need need to bite the bullet and get the carini one if you want to go down the pot and spoon road.

Another guy involved in the business on the budget once posted this on one of the local boards: "I use a Beauty type wax heater but I removed the thermostat so that the temp goes a little bit higher than 100°C."
It's hard to make any conclusion from his short advice. Perhaps some experimenting with the thermostat part of the circuit can lead to positive results in terms of achieving necessary temperature provided the heater itself has enough capacity to tolerate higher temperatures.

(edit) ... a minute later ...
Wait... I just realized that one of the "traditional" types of waxing pots uses an outer container filled with water and that keeps the wax inside the pot melted.
However - isn't boiling water stays at 100°C temperature point?
Sorry - that all confuses me. I'm really not sure about the best wax temperature and I don't have enough experience to judge it.
Theo and all - can you clarify this once again please?

You got it in one. Rosin makes the beeswax /rosin mix gooey and tough - tough not hard.  all tradional hot glues melt at below 100 C . Until modern thermostats came along the the only temperature control point at all was the temperature of boiling water. Heating a bit higher gives you more time to work the wax whether with a brush or a spoon before it ools to it's freezing point, but tends to burn it - not sure but I think it' is the rosin molecules that break down first.
Logged

Serge

  • Member
  • *
  • Offline Offline
  • Posts: 21
Re: Hohner waxing spoon design
« Reply #22 on: January 29, 2021, 10:14:56 PM »

Funnily enough, while we are talking here about (mostly amateur) best wax heating equipment they use simple electric table stoves bot at the Scandalli and Pigini factories.
No - it's not a joke. For instance, Pigini, go to 23:58
https://www.youtube.com/watch?v=LNcp5GWBLBs
Logged

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: Hohner waxing spoon design
« Reply #23 on: January 29, 2021, 11:55:59 PM »

Funnily enough, while we are talking here about (mostly amateur) best wax heating equipment they use simple electric table stoves bot at the Scandalli and Pigini factories.
No - it's not a joke. For instance, Pigini, go to 23:58
https://www.youtube.com/watch?v=LNcp5GWBLBs

I have one of these which I use with an old dedicated saucepan. Cheaper than the cosmetic wax pot
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

Graham Spencer

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3548
  • MAD as a wet Hohner........
Re: Hohner waxing spoon design
« Reply #24 on: January 30, 2021, 05:53:19 AM »

Funnily enough, while we are talking here about (mostly amateur) best wax heating equipment they use simple electric table stoves bot at the Scandalli and Pigini factories.
No - it's not a joke. For instance, Pigini, go to 23:58
https://www.youtube.com/watch?v=LNcp5GWBLBs

I have one of these which I use with an old dedicated saucepan. Cheaper than the cosmetic wax pot

I've got one of thoe too; I use an old briki (Greek/Turkish coffee pot) with mine. I also have a cheap Lidl cosmetic wax heater which works fine with Charlie's wax.
« Last Edit: January 30, 2021, 07:55:11 AM by Graham Spencer »
Logged
Among others, Saltarelle Pastourelle II D/G; Hohner 4-stop 1-rows in C & G; assorted Hohners; 3-voice German (?) G/C of uncertain parentage; lovely little Hlavacek 1-row Heligonka; Bâ™­/Eâ™­ Koch. Newly acquired G/C Hohner Viktoria. Also Fender Jazz bass, Telecaster, Stratocaster, Epiphone Sheraton, Charvel-Jackson 00-style acoustic guitar, Danelectro 12-string and other stuff..........

Squeezing in the Cyprus sunshine

Peadar

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2039
Re: Hohner waxing spoon design
« Reply #25 on: January 30, 2021, 07:39:28 AM »

I just wish I hadn't given the old (and only) fondue set to a charity shop.
Logged

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: Hohner waxing spoon design
« Reply #26 on: January 30, 2021, 08:27:53 AM »

I just wish I hadn't given the old (and only) fondue set to a charity shop.

Probably a good thing!
Fondue pots are usually heated with candles or spirit burners. Not the safest option for heating reed wax...  :o
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

Tone Dumb Greg

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4955
    • Dartmoor Border Morris
Re: Hohner waxing spoon design
« Reply #27 on: January 30, 2021, 08:51:33 AM »

Funnily enough, while we are talking here about (mostly amateur) best wax heating equipment they use simple electric table stoves bot at the Scandalli and Pigini factories.
No - it's not a joke. For instance, Pigini, go to 23:58
https://www.youtube.com/watch?v=LNcp5GWBLBs

Interesting video.
They don't seem to worry about breathing wax fumes.
Logged
Greg Smith
DG/GC Pokerwork, DG 2.4 Saltarelle, pre-war CF Hohner, Hohner 1040 Vienna style, old  BbEb Hohner that needs a lot of work.

ACCORDION, n. An instrument in harmony with the sentiments of an assassin. Ambrose Bierce

diatonix

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 622
Re: Hohner waxing spoon design
« Reply #28 on: January 30, 2021, 09:45:38 AM »

Funnily enough, while we are talking here about (mostly amateur) best wax heating equipment they use simple electric table stoves bot at the Scandalli and Pigini factories.
No - it's not a joke. For instance, Pigini, go to 23:58
https://www.youtube.com/watch?v=LNcp5GWBLBs

Quod licet Iovi, non licet bovi :D
Logged

rees

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5055
  • Windjammer
    • Wesson Accordions
Re: Hohner waxing spoon design
« Reply #29 on: January 30, 2021, 10:02:32 AM »

Funnily enough, while we are talking here about (mostly amateur) best wax heating equipment they use simple electric table stoves bot at the Scandalli and Pigini factories.
No - it's not a joke. For instance, Pigini, go to 23:58
https://www.youtube.com/watch?v=LNcp5GWBLBs

Interesting video.
They don't seem to worry about breathing wax fumes.

I have sat and watched Letizia Bompezzo using a pot on a single ring electric stove. She has an extractor hood mounted above the wax pot.
Logged
Rees Wesson (accordion builder and mechanic)
Gungrog, Welshpool, Wales, UK
www.melodeons.com

Peadar

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2039
Re: Hohner waxing spoon design
« Reply #30 on: January 30, 2021, 10:07:07 AM »

I just wish I hadn't given the old (and only) fondue set to a charity shop.

Probably a good thing!
Fondue pots are usually heated with candles or spirit burners. Not the safest option for heating reed wax...  :o
Chip pans aren't the safest option for cooking potatoes either but every (English) house used to have one, and  fondue spirit burners have a damper, which reduces the flame to a level that just keeps the cheese from going solid. It isn't the implement itself that is dangerous but the way that you manage it.

Logged

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: Hohner waxing spoon design
« Reply #31 on: January 30, 2021, 10:15:19 AM »

It isn't the implement itself that is dangerous but the way that you manage it.
Exactly, yesterday I had to fit a new tubeless tyre to my mountain bike, these are really hard to seat on the bead unless you have a charge pump which cost many pennies. So I made my own from a 2L coke bottle, some duct tape, two old presta valves, and some plastic tubing. Bit scary to pressurise to 100psi with my  track pump but did the job really well. All it needed was some care and wedging the bottle inside a bucket incase it grenaded.

Tone Dumb Greg

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4955
    • Dartmoor Border Morris
Re: Hohner waxing spoon design
« Reply #32 on: January 30, 2021, 11:36:49 AM »

Funnily enough, while we are talking here about (mostly amateur) best wax heating equipment they use simple electric table stoves bot at the Scandalli and Pigini factories.
No - it's not a joke. For instance, Pigini, go to 23:58
https://www.youtube.com/watch?v=LNcp5GWBLBs

Interesting video.
They don't seem to worry about breathing wax fumes.

I have sat and watched Letizia Bompezzo using a pot on a single ring electric stove. She has an extractor hood mounted above the wax pot.

If she is the woman seen working at waxing reeds around 23 minutes in, is she working away from her normal station? There is no hood to be seen at a height that would effectively protect her. If there is a hood out of sight, above, it would just draw fume past her face.

I would expect an industrial process, like this, to be carried out with due regard to operator safety, so, presumably it is being. I can't find any MSDS for reed securing wax, mostly because if I google it I just get smelly wax for reed diffusers and candles, not stuff for securing accordion reeds.

Any supplier has to give you safety sheets on request, which include instruction for safe use.

It piques my interest because it is something that has been made a big deal of on this site and because I have extensive professional experience of making fuming processes safe.
Logged
Greg Smith
DG/GC Pokerwork, DG 2.4 Saltarelle, pre-war CF Hohner, Hohner 1040 Vienna style, old  BbEb Hohner that needs a lot of work.

ACCORDION, n. An instrument in harmony with the sentiments of an assassin. Ambrose Bierce

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Hohner waxing spoon design
« Reply #33 on: January 30, 2021, 11:51:30 AM »


I would expect an industrial process, like this, to be carried out with due regard to operator safety, so, presumably it is being. I can't find any MSDS for reed securing wax, mostly because if I google it I just get smelly wax for reed diffusers and candles, not stuff for securing accordion reeds.

Any supplier has to give you safety sheets on request, which include instruction for safe use.

It piques my interest because it is something that has been made a big deal of on this site and because I have extensive professional experience of making fuming processes safe.

It is the rosin in the wax mix that is potentially hazardous.  I was diagnosed with asthma a few years after I started regularly doing reed waxing work.  A GP friend who specialises in occupational health explained that fumes from heated colophon (rosin) are a well documented cause of occupational asthma in the electronics industry where colophon is used a soldering flux.  I was on regular inhalers for a couple of years, and installed a fume extractor.  My asthma symptoms have now ceased and I no longer need inhalers, but it's a stark warning.  If you have never suffered asthma it is something you definitely do not want to try.  Asthma is seriously debilitating and can be fatal.  I still have an annual asthma assessment.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

rees

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5055
  • Windjammer
    • Wesson Accordions
Re: Hohner waxing spoon design
« Reply #34 on: January 30, 2021, 04:49:48 PM »


If she is the woman seen working at waxing reeds around 23 minutes in, is she working away from her normal station? There is no hood to be seen at a height that would effectively protect her. If there is a hood out of sight, above, it would just draw fume past her face.

Sorry for the confusion, she is not in the video.
When I say "sat and watched" I mean in person in a little shop in Castelfidardo. She would be waxing reedblocks all day long (mostly big PA blocks), highly skilled and very fast at her job.
The shop owner makes reed scratchers and sells fine leather for bellows gussets. Their main products are all kinds of gift wrappings, cake decorations, etc.
The shop is (or was) just below the Hotel Ginestra near to the old Carini shop.
« Last Edit: January 30, 2021, 04:57:53 PM by Rees »
Logged
Rees Wesson (accordion builder and mechanic)
Gungrog, Welshpool, Wales, UK
www.melodeons.com

Graham W

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 277
Re: Hohner waxing spoon design
« Reply #35 on: January 30, 2021, 05:19:05 PM »


I would expect an industrial process, like this, to be carried out with due regard to operator safety, so, presumably it is being. I can't find any MSDS for reed securing wax, mostly because if I google it I just get smelly wax for reed diffusers and candles, not stuff for securing accordion reeds.

Any supplier has to give you safety sheets on request, which include instruction for safe use.

It piques my interest because it is something that has been made a big deal of on this site and because I have extensive professional experience of making fuming processes safe.

It is the rosin in the wax mix that is potentially hazardous.  I was diagnosed with asthma a few years after I started regularly doing reed waxing work.  A GP friend who specialises in occupational health explained that fumes from heated colophon (rosin) are a well documented cause of occupational asthma in the electronics industry where colophon is used a soldering flux.  I was on regular inhalers for a couple of years, and installed a fume extractor.  My asthma symptoms have now ceased and I no longer need inhalers, but it's a stark warning.  If you have never suffered asthma it is something you definitely do not want to try.  Asthma is seriously debilitating and can be fatal.  I still have an annual asthma assessment.

I bought a cheap and cheerful Chinese solder fume filter from Maplins as I couldn’t find a ‘proper’ one at a price I was prepared to pay, more in hope than expectation, but it’s remarkably effective. Not very powerful fan so you have to get it very close to the work but it does the job. Google ‘Duratool’ solder fume extractor, or branded ‘Weller’ at twice the price ;)
Logged

Tone Dumb Greg

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4955
    • Dartmoor Border Morris
Re: Hohner waxing spoon design
« Reply #36 on: January 30, 2021, 05:25:11 PM »

Looking at MSDS for hot resin/wax mixes which seem similar, it seems to be regarded as low hazard from chronic or acute toxicity. Working in well ventilated areas and considering local exhaust systems is about as far as it goes.

It is mentioned is a possible sensitiser, which would relate to Theo's experience. The advice just says avoid exposure if that happens.
Logged
Greg Smith
DG/GC Pokerwork, DG 2.4 Saltarelle, pre-war CF Hohner, Hohner 1040 Vienna style, old  BbEb Hohner that needs a lot of work.

ACCORDION, n. An instrument in harmony with the sentiments of an assassin. Ambrose Bierce

Peadar

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2039
Re: Hohner waxing spoon design
« Reply #37 on: January 30, 2021, 06:46:17 PM »

Picking up on what Greg was saying - my approach to managing home workshop health and safety has long been that my exposure to invidual hazardous substances is short term and occasional and as such I have assessed the risks to my health from inhalation as negligible.

Historically aromatic compounds were checked by smell. In the 1970's sample sniffing was part of my A level chemistry course.

Under current UK Health & Safety legislaton  COSHH data sheets  should be available from all manufacturers/suppliers  of reed wax.  for their specific product. It has never occurred to me to look for this before but - now I want to know.

Anyone got COSHH data sheets for reed wax?




Logged

Tone Dumb Greg

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4955
    • Dartmoor Border Morris
Re: Hohner waxing spoon design
« Reply #38 on: January 30, 2021, 06:58:35 PM »


Anyone got COSHH data sheets for reed wax?

I've spent a lot of time looking, but I haven't managed to get much past reed diffusers and leg waxing. I did find a pine resin and wax one that looked close, but I didn't bookmark it and I can't find it again.
Logged
Greg Smith
DG/GC Pokerwork, DG 2.4 Saltarelle, pre-war CF Hohner, Hohner 1040 Vienna style, old  BbEb Hohner that needs a lot of work.

ACCORDION, n. An instrument in harmony with the sentiments of an assassin. Ambrose Bierce

Rog

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2525
  • Repair and tuning in Hants
Pages: 1 [2] 3   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal