Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Q Values  (Read 2290 times)

0 Members and 1 Guest are viewing this topic.

Thrupenny Bit

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 7232
  • happily squeezing away in Devon
Q Values
« on: January 28, 2021, 09:39:18 AM »

Of course I value myself highly  ;D but ...

I'm use to seeing in the notation L:1/8
and have a list of 'starting points' for Q: values that I can apply to the tune according to time signature, and tweak to my taste.

With a time signature of 2/4, I'd add Q:1/4=200, and adjust it to taste.

This month's Tune of the Month contenders is Vasen.
It has a time signature of 2/4, with an L value of L:1/16.

How does that affect the Q value?

A confused but very valuable
Q  ;)

Logged
Thrupenny Bit

I think I'm starting to get most of the notes in roughly the right order...... sometimes!

Pete Dunk

  • Typo Expert
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3706
Re: Q Values
« Reply #1 on: January 28, 2021, 10:04:55 AM »

I would say that in general the Q value for tunes with lots of semiquavers (16th notes) will be noticably lower than a tune that is mainly quavers. I set Q:1/4=80 for Vasen just to listen to the tune at a speed for learning. I would then go and listen to the original on YouTube or whatever and adjust the value accordingly. The great thing about abc is that the speed is easily variable to suit your needs and you may well set it very low to learn the tune and discover that it makes a wonderful slow air.


I see Steve beat me to it, hopefully our posts are complimentary.
Logged
Squeezing on the Isle of Oxney, UK
Primo (Serenellini) D/G
Isis D/G
Hohner B/E, G/C, C/F, Bb/Eb G/C/F
Liliputs D/G (G scale), C/F, Bb/Eb, Albrecht Custom D/G (G scale)

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: Q Values
« Reply #2 on: January 28, 2021, 10:05:50 AM »

Of course I value myself highly  ;D but ...

I'm use to seeing in the notation L:1/8
and have a list of 'starting points' for Q: values that I can apply to the tune according to time signature, and tweak to my taste.

With a time signature of 2/4, I'd add Q:1/4=200, and adjust it to taste.

This month's Tune of the Month contenders is Vasen.
It has a time signature of 2/4, with an L value of L:1/16.

How does that affect the Q value?

A confused but very valuable
Q  ;)

Regardless of what the L: value is set at, if you set the Q value to (say) Q:1/4=72*, it will always playback a crotchet (quarter-note) at the rate you specify - in this case 72 beats per minute.

If you change the L: value, say from L:1/16 in the case of 'Vasen' to L:1/8, the notation will change. The note lengths will become twice as long. So with the same tempo marking Q:1/4=72, the tune will play at half the previous speed simply because you have made the note lengths twice as long.


*not quite sure what the tempo of Vasen is meant to be, but going by Lisa's playing, that seems about right to me with L:1/16.
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: Q Values
« Reply #3 on: January 28, 2021, 10:07:28 AM »

I see Steve beat me to it, hopefully our posts are complimentary.
Sorry Pete, I made some editing on my post to correct some errors, then deleted the original. I think we are saying much the same thing.  ;)
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

Anahata

  • This mind intentionally left blank
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 6767
  • Oakwood D/G, C/F Club, 1-rows in C,D,G
    • Treewind Music
Re: Q Values
« Reply #4 on: January 28, 2021, 10:08:22 AM »

http://abcnotation.com/wiki/abc:standard:v2.1#qtempo
and also
http://abcnotation.com/wiki/abc:standard:v2.1#outdated_information_field_syntax

For reference, and possible explanation for why you might have thought the L: header had some effect.
Logged
Слава Україні !
Music recording and web hosting: www.treewind.co.uk
Mary Humphreys and Anahata: www.maryanahata.co.uk
Ceilidh band: www.barleycoteband.co.uk

Thrupenny Bit

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 7232
  • happily squeezing away in Devon
Re: Q Values
« Reply #5 on: January 28, 2021, 10:17:46 AM »

Ah thanks chaps.
Yes I had thought the L: and Q: were related, so will read Anahata's reference to clarify.

I usually set the Q: value to whatever I'm listening to, foot tapping being essential here!
Will set the Q: value as I deem appropriate.
As  cuppa has arrived, will go and read Anahata's link...
Thanks all.
Q
now feeling independently valued  ;D
Logged
Thrupenny Bit

I think I'm starting to get most of the notes in roughly the right order...... sometimes!

Pete Dunk

  • Typo Expert
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3706
Re: Q Values
« Reply #6 on: January 28, 2021, 11:20:38 AM »

I think the important thing to remember here is that abc is a tool for creating musical notation and the value of the L: field is chosen to best suit the transcriber and minimise the number of characters (and therefore typing) in the file. The value of note length in the Q: field is dictated by the time signature so in C, 4/4, 3/4, and 2/4 - Q:1/4=n. In cut time C|, 2/2 - Q:1/2=n. I often see 2/2 tunes with Q:1/4=n in the header and I'm not sure if this is acceptable as my musical theory knowledge is pretty sketchy here, perhaps Steve or Anahata can enlarge on this.


Compound time signatures where the beats are made up of groups of 3 notes: 6/8, 9/8 etc again have a Q: value for a single beat so Q:3/8=n is used. In all instances n is that speed that you want the tune to play back at, I'm not convinced that Q=100 in abc will sound the same as a tune played to a metronome set to 100 bpm but that's a different matter. Remember that your Q: value sets the midi playback speed you want to hear yourself played by abc software and is not necessarily correct in the real world!
Logged
Squeezing on the Isle of Oxney, UK
Primo (Serenellini) D/G
Isis D/G
Hohner B/E, G/C, C/F, Bb/Eb G/C/F
Liliputs D/G (G scale), C/F, Bb/Eb, Albrecht Custom D/G (G scale)

Thrupenny Bit

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 7232
  • happily squeezing away in Devon
Re: Q Values
« Reply #7 on: January 28, 2021, 11:49:43 AM »

Thanks Pete, that's starting to make sense.
Cheers
Q
Logged
Thrupenny Bit

I think I'm starting to get most of the notes in roughly the right order...... sometimes!

Anahata

  • This mind intentionally left blank
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 6767
  • Oakwood D/G, C/F Club, 1-rows in C,D,G
    • Treewind Music
Re: Q Values
« Reply #8 on: January 28, 2021, 02:59:04 PM »

I often see 2/2 tunes with Q:1/4=n in the header and I'm not sure if this is acceptable as my musical theory knowledge is pretty sketchy here, perhaps Steve or Anahata can enlarge on this.

It doesn't matter much as a metronome marking always specifies a type of note (e.g. quaver, dotted crotchet.) Let common sense prevail! (which includes keeping the number in a sensible range.)
In ABC, markings like Q: 100 are ambiguous and likely to be misinterpreted, which is why that form of Q header is now deprecated
and you should use e.g. Q: 1/8=200.

Remember that your Q: value sets the midi playback speed you want to hear yourself played by abc software and is not necessarily correct in the real world!
Even in the classical music world, printed metronome marks, even those specified by reputable composers, can be quite unbelievable and get ignored by conductors and performers!
Logged
Слава Україні !
Music recording and web hosting: www.treewind.co.uk
Mary Humphreys and Anahata: www.maryanahata.co.uk
Ceilidh band: www.barleycoteband.co.uk

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: Q Values
« Reply #9 on: January 28, 2021, 03:52:18 PM »

I often see 2/2 tunes with Q:1/4=n in the header and I'm not sure if this is acceptable as my musical theory knowledge is pretty sketchy here, perhaps Steve or Anahata can enlarge on this.

It doesn't matter much as a metronome marking always specifies a type of note (e.g. quaver, dotted crotchet.) Let common sense prevail! (which includes keeping the number in a sensible range.)
In ABC, markings like Q: 100 are ambiguous and likely to be misinterpreted, which is why that form of Q header is now deprecated
and you should use e.g. Q: 1/8=200.

Remember that your Q: value sets the midi playback speed you want to hear yourself played by abc software and is not necessarily correct in the real world!
Even in the classical music world, printed metronome marks, even those specified by reputable composers, can be quite unbelievable and get ignored by conductors and performers!

I always try to code my Q: field so that the metronome marking is a sensible value, so I would say that in your example above, Q: 1/8 = 200, is too fast for ease of use. My ancient clockwork metronome doesn't really cope with 200 bpm (its bearings would run hot! :o), nor would a printed tempo marking of ♪ = 200 be very useful. Who can estimate a tempo of 200 bpm?

However, rewrite that to Q:1/4=100, ♩=100, and that suddenly becomes much more user friendly, with the music still playing at the same speed.
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

Anahata

  • This mind intentionally left blank
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 6767
  • Oakwood D/G, C/F Club, 1-rows in C,D,G
    • Treewind Music
Re: Q Values
« Reply #10 on: January 28, 2021, 08:58:17 PM »

Yes, that was a bad example. I don't know where I got that from!
Logged
Слава Україні !
Music recording and web hosting: www.treewind.co.uk
Mary Humphreys and Anahata: www.maryanahata.co.uk
Ceilidh band: www.barleycoteband.co.uk

Tone Dumb Greg

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4955
    • Dartmoor Border Morris
Re: Q Values
« Reply #11 on: January 28, 2021, 09:54:07 PM »

As Steve says, the L: value is irrelevant, the software will correct any change in value. As long as the score renders correctly the bpm value is all that matters.

Q parameters are bpm and  beat duration as a fraction of a whole note.

To determine Q parameters [of the tune example you are using]  I follow this simple process:
1. Determine the bpm by tapping along to the tune in a way that feels right. Comfortable tapping will depend on tempo. My limit is around 180bpm. If you're tapping is difficult to sustain, halve the rate at which you tap and vice versa.
I use this link (on a PC) to determine bpm, easy peasy.  I've never checked to see if it works on other devices, but I can't see why not.
https://www.beatsperminuteonline.com/

2. Compare your tapping with the score to determine the period (length) of a tap. e.g., with a time signature of 2/4, that's two quarter notes to a bar. If you're tapping twice to the bar your note length is 1/4. If you're tapping four times to the bar your beat length is 1/8.

3. Enter the results as Q:beat length=bpm

For example: Vasen as performed by Hoven Droven

Using Tap BPM I read the tempo as 166ish
Comparing with score I was tapping 4 beats to the bar.
The time signature was 2/4 so my tap duration was 1/8
Q:1/8=166

Some people like a slower tap rate, so I tried tapping every other beat (as I heard it)
Tempo came out at 83ish
I was tapping 2 beats to the bar. Time signature still 2/4, so tap duration was 1/4, now.
Q:1/4=83
« Last Edit: January 29, 2021, 09:22:54 AM by Tone Dumb Greg »
Logged
Greg Smith
DG/GC Pokerwork, DG 2.4 Saltarelle, pre-war CF Hohner, Hohner 1040 Vienna style, old  BbEb Hohner that needs a lot of work.

ACCORDION, n. An instrument in harmony with the sentiments of an assassin. Ambrose Bierce

Roger Hare

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 949
  • Urmston, Lancashire, U.K. éééé
Re: Q Values
« Reply #12 on: January 29, 2021, 06:36:51 AM »

...the value of the L: field is chosen to best suit the transcriber and minimise the number of characters (and therefore typing) in the file....
May I respectfully suggest that this is not quite as good an idea as it might seem at first sight?
Perhaps I have a slightly unconventional take on this stuff, but:

Clarity is the important thing here, and (if I have understood what's going on here), an L: value
of 1/8 means that a single note (x) is always a quaver; a double note (x2) is always a crotchet,
and so on. Achieving that clarity at the expense of typing a few extra / characters to get
'half-notes' is, I humbly suggest(*), a small price to pay.

(*) A little bit of brown-nosing never hurts...

In any case, I'm not convinced that reducing the number of characters by using L:1/16 or L:1/4
'as the situation demands' actually works quite as well 'as advertised'. In the last couple
of years. I have converted hundreds of tunes from L:1/16 and L:1/4 to L:1/8, and while it's true
that going from 1/16 to 1/8 usually does increase the number of characters; going from 1/4 to 1/8 as
often as not reduces the number of characters (ie: L:1/4 was a bad idea in the first place). These
are empirical observations, but I've seen this often enough to be sure that it's a genuine 'effect',
and as I say, achieving clarity at the expense of typing a few extra character is not to be sniffed
at (at least not if you are as big a musical numptie as me).

The real nightmare situation arises when a transcriber elects to change the L: value every couple of
bars to save a few characters - often as many characters are wasted typing the extra L: specifications
as are saved by changing it in the first place.

I've worked all this out over the last couple of years while cherry-picking choice tunes from 'legacy' ABC
files, trying to get them to both look OK and play back properly at the same time...

Whatever, this is what I do for my own transcriptions - I use L:1/8 as default. I always do this
explicitly, because for meters where the value of the top/bottom ratio is less than 0.75, the default
is L:1/16, where it is greater than 0.75 it is L:1/8 - another fruitful source of confusion.

Whatever, it works for me, and is now part of my 'starting' ABC tune specification, which always
includes explicit L: and Q: values (1/8 and 120 respectively):

X:
T:
M:
L:1/8
Q:120
K:


That order is (I think) as recommended by at least one of the in-house gurus here, and also in GG's ABC manual.

I should also make it clear that my whole approach is that of a computer programmer (which I was), not necessarily
as a musician (which I'm only pretending to be 8)).

Like OP I have a standard starting set of Q values which I usually use to replace the 120 once I have got
the tune typed in and start listening to it.

Hm! I seem to have said more about L than Q, but it's all part of the same system, and I got there in the end...

Enough! My two penn'orth. Time for breakfast...
« Last Edit: January 29, 2021, 09:55:54 AM by Roger Hare »
Logged
My ABC tune collections can be found here (GoogleDrive) & here (Dropbox).

For more about Manchester Morris, The Beech Band Folk Club or anything else,  please use the private messaging facility.

Pete Dunk

  • Typo Expert
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3706
Re: Q Values
« Reply #13 on: January 29, 2021, 11:11:10 AM »

Roger we must agree to disagree on this ocassion and I do fundamentally disagree with almost everything in your post I'm afraid. Here for your delictation is a little ditty I transcribed some years ago, I wonder how many slashes would appear using your method of transcription?


X:23
T:Coucou, Le
T:Cuckoo, The
C:L-C Daquin
C:arr, Danny Chapman
M:2/4
L:1/16
%%titlefont Helvetica, 22
%%subtitlefont Helvetica,16
%%composerfont Helvetica
%%barnumbers 1
%%MIDI program 73 % flute
Q:1/4=70
Z:Peter Dunk 2013
K:G clef=treble
|:zBcB eBcB &E,4 z2G2|gBcB eBcB &E4 z2G2|\
gBcB eBcB &E4 z2G2|g2f2{e2f2}e2^d2 &E2F2G2A2|
%
eBcB gBcB &G4 z2E2|AABA fABA &F4 z2^D2|\
GGAG eGAG &E4 z2 C2|FFGF dFGF &D4 z2 B,2|
%
EEFE cEFE &C4 z2 A,2|[1^D2E2{F2G2}F2G2 &B,2G,2F,2E,2|\
F8 &B,F,G,A, B,A,G,F,:|[2^DEDE FGAF &B,2B,2 D2A,2|
%
B2AG TF2>E2 &G,2A,2B,2z2||E8 &zB,A,B, G,B,A,B,|\
zded gded &E,2 z2 z2 B2|bded gded &G4 z2B2|
%
%
bded gded &G4 z2B2|b2a2{g2a2}g2f2 &G2A2B2c2|\
gded bded & B4 z2G2|ccdc acdc &A4 z2F2|
%
BdcB gdcB &G4 z2G2|e2d2{c2d2}c2B2 &c2B2A2G2|\
Adcd z2a2 &D4 Adcd|f4 z2a2 &Ddcd Adcd|
%
"3"f4 z2"2"a2 & Ddcd A"1"dc"1"d|"1"f4 z2a2 &"3"DAGA\
FAGA|d4 z2d2 &B,GFG DGFG|B4 z2d2 &G,GFG DGFG|
%
B4 z2d2 &G,GFG DGFG|B4 z2d2 &G,GFG DGFG|\
GFGA BABc &E2E2D2C2|d2e2 {B}A2>G2 &B,2C2D2D,2|
%
[G8D8] &G,2 G,A, B,A,G,F,|:zBcB eBcB & E,4 z2G2|\
gBcB eBcB &E4 z2G2|gBcB eBcB &E4 z2G2|
%
g2f2{e2f2}e2^d2 &E2F2G2A2|eBcB gBcB &G4 z2E2|\
AABA gABA &F4 z2^D2|GGAG eGAG &E4 z2C2|
%
FFGF dFGF &D4 z2B,2|EEFE cEFE &C4 z2A,2\
|[1^D2E2F2G2 &B,2G,2F,2E,2|F8 &B,F,G,A, B,A,G,F,:|
%
[2^DEDE FGAF &B,2B,2D2A,2|B2AG TF2>E2 &G,2A,2B,2z2|\
E8 &zB,A,B, G,B,A,B,||zBAB ^GBAB &E,2z2 z2E2|
%
eBAB ^GBAB &^G,4 z2E2|dBAB ^GBAB & B,4 z2E2|\
eB^cd edcB &^G,4 z2E2|^ccBc ^AcBc &^A,4 z2F2|
%
f^cBc ^AcBc &^A,4 z2 F2|e^cBc ^AcBc &^C4 z2F2|\
e^cde fedc &^A,4 z2F2|dd^cd Bdcd &B,4 z2B,2|
%
fd^cd Bdcd &D,4 z2 B,2|gd^cd Bdcd &E,4 z2B,2|\
^gd^cd Bdcd & =F,4 z2B,2|^afef ^cfef &^F,4 z2E,2|
%
bfef dfef &D,4 z2 B,2|gafg efde &E2F2G2F2|\
^cdcd edcB &E4 z2G,2|^A2>B2 B2AB &F,4 B,4|
%
[^c8^A8^C8] &F2FE FGFE|z"2"FGF BFGF &D4 z2D2|\
dFGF BFGF &B,4 z2D2|dFGF BFGF &B,4 z2D2|
%
d2^c2"1"B2^A2 &B,2^C2D2E2|BFGF dFGF &D4 z2 B,2|\
EEFE ^cEFE &^C4 z2^A,2|
%
DDED B"1"DED &B,4 z2B,2|(3^C2B2F2 B^A^GA &(3E,2G,2F,2 z2x2|\
[B8F8] &B,2B,=C B,A,G,F,||
%
%
|:zBcB eBcB &E,4 z2G2|gBcB eBcB &E4 z2G2|\
gBcB eBcB &E4 z2G2|g2f2{e2f2}e2^d2 &E2F2G2A2|
%
eBcB gBcB &G4 z2E2|AABA fABA &F4 z2^D2|\
GGAG eGAG &E4 z2 C2|FFGF dFGF &D4 z2 B,2|
%
EEFE cEFE &C4 z2 A,2|[1^D2E2{F2G2}F2G2 &B,2G,2F,2E,2|\
F8 &B,F,G,A, B,A,G,F,:|[2^DEDE FGAF &B,2B,2 D2A,2|
B2AG F2>E2 &G,2A,2B,2z2||[E8B,8G,8E,8]|]
« Last Edit: January 29, 2021, 11:13:13 AM by Pete Dunk »
Logged
Squeezing on the Isle of Oxney, UK
Primo (Serenellini) D/G
Isis D/G
Hohner B/E, G/C, C/F, Bb/Eb G/C/F
Liliputs D/G (G scale), C/F, Bb/Eb, Albrecht Custom D/G (G scale)

Roger Hare

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 949
  • Urmston, Lancashire, U.K. éééé
Re: Q Values
« Reply #14 on: January 29, 2021, 12:26:52 PM »

Roger we must agree to disagree on this ocassion and I do fundamentally disagree with almost everything in your post I'm afraid. Here for your delictation is a little ditty I transcribed some years ago, I wonder how many slashes would appear using your method of transcription?

I don't have a problem with that, and I think we may have agreed to differ in respect of this before? Different strokes for different
folks is the name of the game. It's what you get used to, I guess. FWIW, it's easy to do, and more importantly, from the other
guy's point of view, easy to reverse (I just did this - apart from a few spaces my 'changed and then changed back' version looked
pretty much the same as your original)

In most cases, there isn't quite such a major effect, but in this instance, it's 583 slashes, and the file is very roughly 10% larger... 8)
Logged
My ABC tune collections can be found here (GoogleDrive) & here (Dropbox).

For more about Manchester Morris, The Beech Band Folk Club or anything else,  please use the private messaging facility.
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal