Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Preserving or obtaining better tone when removing reed metal  (Read 1243 times)

0 Members and 1 Guest are viewing this topic.

Gonk

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 507
  • (Mudlark Music)
    • Mudlark Music
Preserving or obtaining better tone when removing reed metal
« on: January 28, 2021, 03:29:13 PM »

I've been reading about ways the best reedmakers have approached shaping the tongue.  "Bombata" reeds, as well as reeds finished by the maker "E. Carloni," have a domed top.  This appears to be universally understood as a positive feature, and one that is too time consuming for mass-market reeds.

When I'm removing enough metal to go from A=435 to A=440, as I often find myself doing, I think about this a bit, and I try to protect the center line of the reed a bit more, while sloping the sides just a little.  Without knowing quite why, I imagine it helps keep the "spine" of the metal strong, even when removing mass.  I associate hardness of reed material with strong tone and quick response, so this makes some sense to me, but it might be spurious logic.

I'm curious about the opinions here.  Is this a worthwhile effort?  Is it actually counterproductive?

And as separate question: in general, I feel confident about my filing technique, but I'm always open to improving it through feedback.  The things I do are to keep my strokes mostly with the direction of the reed, while holding the file at a 45 degree angle.  I file the bottom or top 1/5 to 1/3 of the reed, and aim for a smooth gradient from the belly to the tip when working the top.  I treat the profile of the tip with care.  Files are Vallorbe, mostly #2, a riffler, and a #1 and #3 for low and high reeds.  (And fine sandpaper for the squeakers.)
« Last Edit: January 28, 2021, 03:36:01 PM by Gonk »
Logged
Mudlark Music - restoration, repairs, lessons, and sales.  (USA)  http://mudlark-music.com

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Preserving or obtaining better tone when removing reed metal
« Reply #1 on: January 28, 2021, 03:59:52 PM »

You seem to be on the right lines. I have an open mind about the bombata shaping.  I’m not sure if the shaping contributes to the performance of the reed or if it’s more an sign that utmost care has been taken with all aspects of making the reed.  In theory it could be an advantage in having the narrowest edge so that the reed opens and closes the window as cleanly as possible.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Gonk

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 507
  • (Mudlark Music)
    • Mudlark Music
Re: Preserving or obtaining better tone when removing reed metal
« Reply #2 on: January 28, 2021, 04:25:45 PM »

Oh, that's a really interesting take, and also makes sense.  So the duller or more square-cut the edge, the more delay it would add to the bottom of the "airflow over time" sine wave - a infinitesimal flat moment.  I can imagine that having more effect with a thick reed.  It does seem minute, but to be fair, our ears do pick up very minute fluctuations in the shape of a wave, and that can define timbre...
Logged
Mudlark Music - restoration, repairs, lessons, and sales.  (USA)  http://mudlark-music.com

boxcall

  • You got to love it!!!
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1801
Re: Preserving or obtaining better tone when removing reed metal
« Reply #3 on: January 28, 2021, 05:22:48 PM »

I have bombata reeds in the one row I built and love the sound also the responsiveness:)

When I got it back from tuning from the Button box I was surprised that the scratches were spread out more and possibly smaller in size. Anyway the appearance seemed like there was more of them.

So I would agree that your on the right track.
Logged
Hohner 1040 C, Beltuna one row four stop D, O'Byrne Dewitt/ Baldoni bros. D/C#, Paolo soprani "pepperpot" one row D

mselic

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1683
Re: Preserving or obtaining better tone when removing reed metal
« Reply #4 on: January 28, 2021, 07:59:09 PM »


When I got it back from tuning from the Button box I was surprised that the scratches were spread out more and possibly smaller in size. Anyway the appearance seemed like there was more of them.

I’m curious to see what you’re describing. Could you post a photo?
Logged
C#/D player

diatonix

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 622
Re: Preserving or obtaining better tone when removing reed metal
« Reply #5 on: January 29, 2021, 08:52:01 AM »

I remember Claudio Binci telling me once that he saw no benefit in "bombare" or "tirare" his reeds. He claimed it would do more damage than anything else.
Logged

Rog

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2525
  • Repair and tuning in Hants
Re: Preserving or obtaining better tone when removing reed metal
« Reply #6 on: January 29, 2021, 02:42:47 PM »

I’d be interested to see pictures of these bombata  reeds and also a photo of your filed reeds.
« Last Edit: January 29, 2021, 02:44:23 PM by RogerT »
Logged

Pearse Rossa

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 723
Re: Preserving or obtaining better tone when removing reed metal
« Reply #7 on: January 29, 2021, 08:01:51 PM »

...fine sandpaper for the squeakers.

Squeakers?
Logged

Winston Smith

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4066
  • AKA Edward Jennings
    • "Our Luxor B&B" Luxor life, slice by slice.
Re: Preserving or obtaining better tone when removing reed metal
« Reply #8 on: January 29, 2021, 08:23:16 PM »

"Squeakers?"

Probably of no interest to you, Pearse. They're the top end, high, reeds on a D/G; I think the dogs hear them OK!
Logged
At last, broken and resigned to accept conformity.
Oh, how I LOVE Big Brother!

Pearse Rossa

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 723
Re: Preserving or obtaining better tone when removing reed metal
« Reply #9 on: January 29, 2021, 08:55:19 PM »

Of course. Sláinte.
Logged
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal