Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: reed quality of older Hohners  (Read 1833 times)

0 Members and 1 Guest are viewing this topic.

Willem Feltkamp

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 129
  • Tinkering and playing diatonics and CBA
reed quality of older Hohners
« on: January 31, 2021, 08:47:03 AM »

Hi guys,

I have a lot of questions so here's my second:
Would it be a good idea to buy a cheap pre-war Hohner for spare parts like reeds?
Is there a 'golden age' of reed quality for Hohners?
I suppose developments in production techniques, as well as possibly offering higher quality instruments after the war may have led to a difference in quality.

And while I'm at it: is the quality of the new reeds that Hohner sells as replacement parts good?

Willem
Logged

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: reed quality of older Hohners
« Reply #1 on: January 31, 2021, 08:56:26 AM »

The nicest Hohner reeds tend to be those made in the 1920s and 1930s. Usually steel reed tongues on zinc plates, stamped 'H'. 
But its a shame to break up an old instrument simply to harvest its reeds, unless the rest of the instrument is in such bad condition that it is beyond repair. Far better to restore the instrument if you can, and get it playing again.

Quote
And while I'm at it: is the quality of the new reeds that Hohner sells as replacement parts good?
Yes, they are good, but sound different from the vintage reeds. The new reeds are steel reed tongues on aluminium plates. They tend to play with a brighter, stronger sound than the old zinc plate reeds.
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

Willem Feltkamp

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 129
  • Tinkering and playing diatonics and CBA
Re: reed quality of older Hohners
« Reply #2 on: January 31, 2021, 08:59:18 AM »

Hi Steve,

Thanks, just what I wanted to know!
Logged

Peadar

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2039
Re: reed quality of older Hohners
« Reply #3 on: January 31, 2021, 09:01:29 AM »

The nicest Hohner reeds tend to be those made in the 1920s and 1930s. Usually steel reed tongues on zinc plates, stamped 'H'. 
But its a shame to break up an old instrument simply to harvest its reeds, unless the rest of the instrument is in such bad condition that it is beyond repair. Far better to restore the instrument if you can, and get it playing again.
I second that.....and there are instruments that are that bad. Just not many of them.
Some people buy old Hohner PA's - but those reeds then have to be severely re-tuned to make them bi-sonoric.
Also be aware that many of the oldest Hohners have bronze/brass reeds. These are lovely reeds but they don't respond in the same way as steel reeds. If you are lucky enough to buy one of those by accident - restoration every time.
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: reed quality of older Hohners
« Reply #4 on: January 31, 2021, 09:24:35 AM »

Pre-WW2 Hohner reeds play very well,  good response and can have a sweet sound, but they are not as loud as post-WW2 German made reeds.  They are also appear to have gone through several changes in production methods which have subtle effects on on sound and responsiveness.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Willem Feltkamp

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 129
  • Tinkering and playing diatonics and CBA
Re: reed quality of older Hohners
« Reply #5 on: January 31, 2021, 10:20:09 AM »

The nicest Hohner reeds tend to be those made in the 1920s and 1930s. Usually steel reed tongues on zinc plates, stamped 'H'. 
But its a shame to break up an old instrument simply to harvest its reeds, unless the rest of the instrument is in such bad condition that it is beyond repair. Far better to restore the instrument if you can, and get it playing again.
I second that.....and there are instruments that are that bad. Just not many of them.
Some people buy old Hohner PA's - but those reeds then have to be severely re-tuned to make them bi-sonoric.
Also be aware that many of the oldest Hohners have bronze/brass reeds. These are lovely reeds but they don't respond in the same way as steel reeds. If you are lucky enough to buy one of those by accident - restoration every time.
I'm looking at a really cheap Hohner button accordion (96 bass C system Norma III M) as a source for reeds.
I was thinking of making them 'bi-sonoric' by lowering the pitch by soldering a small amount of tin on the tip, rather than weakening the base by grinding, or having to take away most of the tip to get the pitch up by a semitone)
Logged

Andrew Kennedy

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 184
    • About Sword Dancing
Re: reed quality of older Hohners
« Reply #6 on: January 31, 2021, 11:21:16 AM »

I bought a 1930s Club IIb Victoria with a view to using it to play for dance (because I like them) but it wasn't really loud enough. I subsequently bought a Chinese Erica (discussed in another thread) which has plenty of volume. I certainly wouldn't want to be mixing the reeds.
Logged
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal