Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Hohner replacement finger board - how to attach?  (Read 1895 times)

0 Members and 1 Guest are viewing this topic.

Gandy

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 407
Hohner replacement finger board - how to attach?
« on: October 12, 2009, 09:31:18 AM »

Hi,

For anyone who's made a wooden fingerboard, I'd be interested in tips on how to attach.   What works best, a tapped bushing to suit the existing screws, or threaded rod epoxied in place?   Any suggestions would be welcome, thanks in advance,
Logged
Tony S

an bosca ceoil

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 347
Re: Hohner replacement finger board - how to attach?
« Reply #1 on: October 12, 2009, 09:47:48 AM »

Original wooden fingerboards are held by ordinary woodscrews, not machine screws as required for plastic ones.
(Suspect that if you went the epoxied in stud route you might struggle to fit the board over the buttons)
« Last Edit: October 12, 2009, 09:51:25 AM by SHY TALK »
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Hohner replacement finger board - how to attach?
« Reply #2 on: October 12, 2009, 11:21:32 AM »

Yes, woodscrews seem to work well on the wooden fingerboard on Hohner two row and all Club models. Woodscrews are superior in some respects, especially being more forgiving of slight misalignment when starting the screw into its hole.  Its all too easy to get long thin machine screws cross threaded and ruin the insert and/or the screw.
« Last Edit: October 12, 2009, 11:23:40 AM by Theo »
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Gandy

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 407
Re: Hohner replacement finger board - how to attach?
« Reply #3 on: October 12, 2009, 07:51:21 PM »

Thank for both comments.   Much easier that I thought.  For moment I thought I'd need to find ridiculously thin screws, but it turns out the holes through the body are just under 4mm so a No.6 screw fits easily.   I only have a mock-up of the fingerboard made from scrap softwood, but its now fitted and working.
Logged
Tony S
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal