Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: 3-row hohner,, stradella bass machine  (Read 837 times)

0 Members and 1 Guest are viewing this topic.

dino.pafftti

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 464
3-row hohner,, stradella bass machine
« on: February 13, 2021, 07:21:55 AM »

I would like to ask for information ,, whether the pallet may have been glued with bone glue ??     what is the best way to clean brass shafts ??  they have little green oxidation ..
Logged

dino.pafftti

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 464
Re: 3-row hohner,, stradella bass machine
« Reply #1 on: February 13, 2021, 02:08:03 PM »

maybe I'll glue them with bone glue,,  ::) i think it may be the best,
Logged

dino.pafftti

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 464
Re: 3-row hohner,, stradella bass machine
« Reply #2 on: February 14, 2021, 03:17:55 PM »

I don't know if anyone cares ,,, but I'll put it here anyway  ;D
3-row hohner stradella bass machine
I polished the shafts, this is what happened ,,,
yes i could fix it but i was thinking of making new shafts from iron shaft,,
brass is a bit soft, also flexible ,,  i think iron better ..
i don't know if i can find 3mm shaft, (gas welding wire best)
Logged

Peadar

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2039
Re: 3-row hohner,, stradella bass machine
« Reply #3 on: February 14, 2021, 03:41:29 PM »

I don't know if anyone cares ,,, but I'll put it here anyway  ;D
3-row hohner stradella bass machine
I polished the shafts, this is what happened ,,,
yes i could fix it but i was thinking of making new shafts from iron shaft,,
brass is a bit soft, also flexible ,,  i think iron better ..
i don't know if i can find 3mm shaft, (gas welding wire best)

You might try model shops - especially those that supply railway modellers. They supply lengths of round bar in a range of small millimetre diameters and materials. A particular use of 3mm steel is model locomotive axles so the material has to be true (i.e straight). you will also find they supply precision drawn small diameter brass rod and tube.

pallets - I have been using gum arabica recently  for spot repairs of loose pallets and pallet facings. Cannot yet say how it will perform longer term.
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: 3-row hohner,, stradella bass machine
« Reply #4 on: February 14, 2021, 04:13:37 PM »

I’ve used gas welding wire for this sort of repair, but you still have to join the two parts. I’ve successfully joined the arm by drilling the long rod with a 1mm hole (tricky!) and fixing the wire in place with solder or epoxy.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

dino.pafftti

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 464
Re: 3-row hohner,, stradella bass machine
« Reply #5 on: February 14, 2021, 04:41:38 PM »

Thanks,,
i have a welding machine but need to have the right wire  ,,
I have noticed that gas welding wire is the best .. i have 2.5mm thread but i need 3mm
trying to find  ..   I don't know if it's in Finland, I have to ask tomorrow.
Logged
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal