Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1] 2 3   Go Down

Author Topic: Microphones and amplification  (Read 15184 times)

0 Members and 1 Guest are viewing this topic.

Chris Brimley

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2038
Microphones and amplification
« on: October 13, 2009, 08:20:06 AM »

I felt a little guilty about contributing to thread drift in the 'Microphones and recording' thread, so thought I'd start a new one.  I don't recall this coming up before, but I may have missed it.

What clearly came out of that discussion was that microphone techniques need to be completely different for recording and playing through a PA system.  Amplifying a box poses a number of special difficulties:

1. Sound is produced from different locations
2. Part of the instrument is moving around
3. The player might like to move about too
4. Anything attached to the LH side needs to be very lightweight
5. Players often change instruments

I've noticed that top players seem to have very different approaches to this issue.

I'm interested to know - what does everybody do about this?  I explained my approach on the other thread, but I think I still have much to learn about it.
Logged

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: Microphones and amplification
« Reply #1 on: October 13, 2009, 09:24:57 AM »

I currently use a microvox set up (more than adequate) but, as I now want to use more than one box in the band (Hohner Erica for dances - Salterelle Conamarra for tunes - 1 row for variety), I shall be moving to a pair of stand mounted Shure SM57s. Let you know Sunday if it is a success.

pete /acorn

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 930
  • .Cast Trilly
    • Acorn Instruments
Re: Microphones and amplification
« Reply #2 on: October 13, 2009, 11:42:56 AM »

Hi,
My Daughter uses a AKG 416 [now 516] monted in a block at the top of her box with its long flexi arm easy to get best position and easily swapped to another box,sennheiser do one similar,just trying out a crown GLM 200,will advise on results.

Pete
Logged
Acorn Instruments are specialist retailers of Castagnari Instruments,and have an extensive stock of new instruments on the shelf for prompt delivery in standard layouts however these can easily be changed to customers special requirements,we have over 600 reeds in stock
 We also have the largest stock in the UK of  pre loved melodons all fully serviced,and with 12 months warranty
UK and international customers catered for
www.acorninstruments.co.uk

Howard Jones

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1203
Re: Microphones and amplification
« Reply #3 on: October 14, 2009, 02:46:09 PM »

I think the answer very much depends on whether you are micing a soloist or a member of a band with other acoustic instruments.

For a soloist you are obviously trying to get the very best sound possible, but you don't have to worry about sound spillage from other instruments.  Most engineers in my experience seem to prefer stand mics set up some distance from the instrument.  This allows the sound to develop, and removes the risk of the player hitting the mics with the instrument.

With a band on the other hand, close-micing is better to minimise picking up other instruments, in which case a mic mounted on the instrument is probably most convenient.  The sound might not match the quality of good stand mics, but some of the subtleties of tone will probably be lost anyway in the general sound, so this is perhaps a trade-off.

I too use an AKG 516 which is fine for my purposes (playing in a band).  But why do AKG supply only one mounting bracket, and make it next to impossible to get hold of additional ones?

pete /acorn

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 930
  • .Cast Trilly
    • Acorn Instruments
Re: Microphones and amplification
« Reply #4 on: October 14, 2009, 03:15:01 PM »

Hi,
Re mounting bracket,I normaly deal with DV247.com but they don't have it.They suggest Sound Technology on 01462 480000.Part number H516.
Hope that helps.

Pete
Logged
Acorn Instruments are specialist retailers of Castagnari Instruments,and have an extensive stock of new instruments on the shelf for prompt delivery in standard layouts however these can easily be changed to customers special requirements,we have over 600 reeds in stock
 We also have the largest stock in the UK of  pre loved melodons all fully serviced,and with 12 months warranty
UK and international customers catered for
www.acorninstruments.co.uk

Chris Brimley

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2038
Re: Microphones and amplification
« Reply #5 on: October 14, 2009, 05:07:15 PM »

I confess that my original reason for going for a free standing system was that I am unconvinced about close-miking systems, after a truly dreadful experience with one particular brand.

It seems to me that the technical issue with the RH side is this:  If you have just one RH close mike, set say 15cm in front of the centre, it's going to be at least 22-25cm away from both the reeds at either end of the RH side, and this is surely going to attenuate the sound from those ends to a significant and noticeable extent, and then it won't sound natural?  Moreover, because the sound from those reeds is coming from the side rather than directly in front of the mike, this is also likely to attenuate their sound still further.

Now, if you try to compensate by having several mikes for the RHS, you immediately set up the 'comb interference problem', described on the other thread so well, which I suspect was the main reason for the dreadful sound from my close mike system.

And if you use a more omni-directional mike to reduce the 'sound from the side' problem, you then get feedback problems.

I would hope that the technical experts at the microphone manufacturers will have thought about these problems, but I suspect they don't have the full answer, because often it seems the same system is recommended for many instruments, most of which have a single sound source (unlike the box).


 
Logged

pete /acorn

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 930
  • .Cast Trilly
    • Acorn Instruments
Re: Microphones and amplification
« Reply #6 on: October 14, 2009, 06:08:06 PM »

Hi.
One system we are also looking at for my daughters piano box is manufactured by Musictec,ItalyThey also do a system for diatonic boxes,
Anyone any exprience of these.

Pete
Logged
Acorn Instruments are specialist retailers of Castagnari Instruments,and have an extensive stock of new instruments on the shelf for prompt delivery in standard layouts however these can easily be changed to customers special requirements,we have over 600 reeds in stock
 We also have the largest stock in the UK of  pre loved melodons all fully serviced,and with 12 months warranty
UK and international customers catered for
www.acorninstruments.co.uk

Howard Jones

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1203
Re: Microphones and amplification
« Reply #7 on: October 14, 2009, 06:41:16 PM »

IIf you have just one RH close mike, set say 15cm in front of the centre, it's going to be at least 22-25cm away from both the reeds at either end of the RH side, and this is surely going to attenuate the sound from those ends to a significant and noticeable extent, and then it won't sound natural?  Moreover, because the sound from those reeds is coming from the side rather than directly in front of the mike, this is also likely to attenuate their sound still further.

That may be true in theory, but I can't say I've noticed it in practice.  Any such effect is probably masked by the sound of the other instruments.  I'm seldom playing in the upper octave, so in practice most of the sound is coming from reeds which are a similar distance from the mic.

I'm not saying it's perfect, nor am I just saying it's "good enough for folk". but it seems to be a good compromise which enables me to move more freely on stage, reduces feedback and avoids the risk of banging the mic stand whilst providing a sound which whilst perhaps not matching a good stand mic is better than "merely acceptable" in a band context.  When I occasionally perform solo I'm more likely to use stand mics.

melod-ian

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 295
Re: Microphones and amplification
« Reply #8 on: October 14, 2009, 08:26:19 PM »

my problem is , I move around a lot when Im playing.
I used to use a fixed AKG (C451B) .. but I brought a few condenser tie-clip mics .. on their own they're a bit trebley .. but with a bit of EQ and compression from the Vox pedal I've just brought its a lovely sound.
   
Logged
3 x Acadian's (C,Bb,A),
Hohner corona iiir (GCF)
PS Black Pearl (DG)
and the old hohner erica (DG)

LJC

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 527
Re: Microphones and amplification
« Reply #9 on: October 14, 2009, 10:04:26 PM »

I cant stand the MicroVox mics which are a pretty common sight - they sound way too bright for an already generally quite loud and strident instrument. The best live melodeon sound I've heard was John Spiers using his AKG (I think?) gooseneck mics. Until one fell off. But nothing is foolproof and I would trade a good sound for a little bit of delicacy.

I often just use an SM57 for band work, especially if I can sit and play as there is much less of a movement issue then. I just mic the treble end as the piano player takes care of all that low stuff, I don't usually even play my bass buttons. I wouldn't record with this though as it looses too much of the sound quality (but makes up for it in durability).
Logged

Chris Brimley

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2038
Re: Microphones and amplification
« Reply #10 on: October 15, 2009, 08:30:16 AM »

Quote
That may be true in theory, but I can't say I've noticed it in practice.

Yes, I would have said the same thing, but one of the things that struck me arising from the discussion so far is that we players may not actually notice what the sound is like at the other end of the system, since boxes are usually so naturally loud that what we hear is mainly the direct sound.  I have been to many dances where I couldn't believe the box player would be happy with the sound he/she was producing, if he/she could only hear it.  Of course we won't notice this on recordings, because the microphone set-up is then much more faithfull to the real sound.
Logged

Simon

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 449
  • Serenellini Selli C/F and Gold98 G/C
Re: Microphones and amplification
« Reply #11 on: October 15, 2009, 08:36:23 AM »

I currently use a microvox set up (more than adequate) but, as I now want to use more than one box in the band (Hohner Erica for dances - Salterelle Conamarra for tunes - 1 row for variety), I shall be moving to a pair of stand mounted Shure SM57s. Let you know Sunday if it is a success.
Aren't they attached with velcro so you can quickly stick them on another box?
Logged

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: Microphones and amplification
« Reply #12 on: October 15, 2009, 09:10:21 AM »

I currently use a microvox set up (more than adequate) but, as I now want to use more than one box in the band (Hohner Erica for dances - Salterelle Conamarra for tunes - 1 row for variety), I shall be moving to a pair of stand mounted Shure SM57s. Let you know Sunday if it is a success.
Aren't they attached with velcro so you can quickly stick them on another box?

You are right but the amount of cable to swap makes it infeasible to quickly change boxes without getting tied in knots. I hope the stand mics will give me greater freedom thusly:
  • No longer tethered to cables
  • Easier to have a "reminder twiddle" for the next tune without having to pull a cable out
  • No longer forgetting to plug back in after said  "reminder twiddle"
  • Able to easily swap boxes
  • I can remove all the velcro from my boxes

Chris Brimley

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2038
Re: Microphones and amplification
« Reply #13 on: October 15, 2009, 09:41:29 AM »

And of course, Lester, with the velcro change, someone has to be ready to turn down both channels on the mixer or you have to remember to turn down the preamp controls, and then up again afterwards, to avoid the audience being subjected to hugely amplified ripping noises, which could easily be confused with something else!
Logged

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: Microphones and amplification
« Reply #14 on: October 15, 2009, 09:48:22 AM »

And of course, Lester, with the velcro change, someone has to be ready to turn down both channels on the mixer or you have to remember to turn down the preamp controls, and then up again afterwards, to avoid the audience being subjected to hugely amplified ripping noises, which could easily be confused with something else!

Conversely it is a good cover up for the "something else"   ;D

LJC

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 527
Re: Microphones and amplification
« Reply #15 on: October 15, 2009, 10:41:14 AM »

If your changing boxes you (or your sound man) needs to be in control of things anyway, what with the change in volumes/tones. What might be a great setup for a Pokerwork (treble cut!!) might sound a bit muddy on a 3v Castagnari which is far darker in sound straight away.
Logged

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: Microphones and amplification
« Reply #16 on: October 15, 2009, 10:55:20 AM »

If your changing boxes you (or your sound man) needs to be in control of things anyway, what with the change in volumes/tones. What might be a great setup for a Pokerwork (treble cut!!) might sound a bit muddy on a 3v Castagnari which is far darker in sound straight away.

Sound Man?? Luxury.

I find having stand mics allows me to cope with volume changes by moving position reasonably easily

Chris Brimley

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2038
Re: Microphones and amplification
« Reply #17 on: October 15, 2009, 11:33:02 AM »

Yes, I do that too, Lester, I find it's often very useful to swap lead instruments in this way.  It seems to me that close mikes prevent this, so you have to use other ways of cutting down volume.  (And this applies to other close miked instruments just as well.)  I feel that a close mike system gives you a driving sound, and many bands want just that, but then you do lose flexibility.

Most vocalists also know when to back off from the microphone and when to come up close, and they use the different sound characteristics to good advantage.  I would have thought that we should be able to do the same, in principle.
Logged

Simon

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 449
  • Serenellini Selli C/F and Gold98 G/C
Re: Microphones and amplification
« Reply #18 on: October 15, 2009, 12:55:33 PM »

Most vocalists also know when to back off from the microphone and when to come up close, and they use the different sound characteristics to good advantage.  I would have thought that we should be able to do the same, in principle.
I wouldn't recommend changing the distance to the microphone for volume control. For singing you can sometimes back off a little if you increase your own volume as a kind of compressor, but I'd never do that with my guitar. That's probably why they invented volume pedals.  ;)
Logged

Rob2Hook

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2278
  • Castagnaris, Hohners & Baffetti
Re: Microphones and amplification
« Reply #19 on: October 16, 2009, 10:06:52 AM »

Most vocalists also know when to back off from the microphone and when to come up close,

Watch one of the many "talent" shows and then try to justify this remark!   ;D

Certainly, if you watch Simon Care playing to a stand mic, he gets a blues harminica sound that close micing will never achieve.  The Dino BP2 sounds like this when playing so hard the bass reeds are starting to choke!

Rob.
Logged
Pages: [1] 2 3   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal