Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Tuning down reeds a semitone  (Read 1596 times)

0 Members and 2 Guests are viewing this topic.

Willem Feltkamp

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 129
  • Tinkering and playing diatonics and CBA
Tuning down reeds a semitone
« on: February 21, 2021, 04:33:43 PM »

sooo....
I now have two Hohner Club III M in C/F tuning.
The idea is to turn one of them into a G/C. Moving the C row won't be too much trouble (provided the reed plates fit the reed block).
For the G row I was thinking of retuning accordion reeds, of which I have a bunch, having taken them out of a 120 bass piano accordion that I use for decoration on the wall. It should provide the missing bass reeds too. But rather than tuning reeds up by a semitone, or even a whole tone, I was thinking of tuning them down by adding weight.
Does anyone have experience in doing that? My first try glueing lead onto a reed was unsuccesful. should I solder copper onto the reeds?
To what extremes did any of you retune reeds succesfully?
Logged

folkloristmark

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 582
    • street entertainers
Re: Tuning down reeds a semitone
« Reply #1 on: February 21, 2021, 04:51:53 PM »

IMHO tuning up a semi tone or even down should be achievable with a level of ability adding weight and it is solder down would be harder and require more fettling tuning cleaning and soldering and I would fear would be less succesful I would use it only to make big basses fit smaller spaces or if I really had no other reeds available. A very good tuner may well find it no problem but its not in your case an easy option.Good luck practice first.the more you do it the easier it becomes.
« Last Edit: February 21, 2021, 04:55:06 PM by folkloristmark »
Logged
Mark Taylor
Folkloristmark

Willem Feltkamp

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 129
  • Tinkering and playing diatonics and CBA
Re: Tuning down reeds a semitone
« Reply #2 on: February 21, 2021, 05:02:09 PM »

I've found the answer in the 'hot rod' video series. A reed is tuned down a whole tone with solder, no problem.
Logged

Graham Spencer

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3548
  • MAD as a wet Hohner........
Re: Tuning down reeds a semitone
« Reply #3 on: February 21, 2021, 06:43:49 PM »

I've not done a whole set of reeds, but I've certainly taken individual reeds down by a semitone with solder very successfully. Do, however, try to keep a small selection of fine files exclusively for use on solder; it clogs easily and is very difficult to clean out of file teeth. Better still, use disposable abrasives wherever possible on solder.

Graham
Logged
Among others, Saltarelle Pastourelle II D/G; Hohner 4-stop 1-rows in C & G; assorted Hohners; 3-voice German (?) G/C of uncertain parentage; lovely little Hlavacek 1-row Heligonka; Bâ™­/Eâ™­ Koch. Newly acquired G/C Hohner Viktoria. Also Fender Jazz bass, Telecaster, Stratocaster, Epiphone Sheraton, Charvel-Jackson 00-style acoustic guitar, Danelectro 12-string and other stuff..........

Squeezing in the Cyprus sunshine

Gonk

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 507
  • (Mudlark Music)
    • Mudlark Music
Re: Tuning down reeds a semitone
« Reply #4 on: February 21, 2021, 07:12:09 PM »

I second that, Graham!  I use a $3 set of needle files for solder.  And I do my best not to breathe the dust.

The amount of solder it takes to drop a mid-pitched reed a semitone is shockingly small.  I am still experimenting to find the "best way" -- whatever that means -- but I'm currently dropping it most of the way with solder, then lowering it a bit more by filing the base of the reed.  Easier to fine tune that way, and by my reasoning, it's mitigating the damage to the tone that can be caused by excessive degrees of either method.
Logged
Mudlark Music - restoration, repairs, lessons, and sales.  (USA)  http://mudlark-music.com

Gav Wood

  • Good talker
  • **
  • Offline Offline
  • Posts: 99
Re: Tuning down reeds a semitone
« Reply #5 on: February 24, 2021, 05:51:08 PM »

I have been through the same experimental process.
Gluing i have had success with, but the reed needs a key first, the surface needs to have clean file marks for the glue to stick. I did the first few with lead from other junker bass reeds, but then moved on to brass. Lead is not a great idea by any means. All have stayed stuck, including heavy session use.

The more recent ones i have done a combination. The middle reeds on the keyboard no more than a tone apart i have filed up and down a semitone. Any more than that and you need to add weight anyway. The bottom reeds often are weighted, so just amend those by filing. The top ones are more complicated as right at the top the difference in length of reed is substantial. For my bcs if you add weight to the top reeds, you are significantly weighting the reed of a pair you will use only the weighted reed, i saw this as a bit counter productive. I have in some cut the reeds down the middle, and glued the right pair back together. Works ok but you have to be careful, the sawing down the middle can release tension in the reed shoe and you end with a bent reed slot.

For information, i do not have a view on what all this means to a finished instrument, they have all worked ok, and cannot tell the difference between the notes where one method stops and the other starts, even with mixed methods of retuning.
Logged

Tone Dumb Greg

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4955
    • Dartmoor Border Morris
Re: Tuning down reeds a semitone
« Reply #6 on: February 24, 2021, 06:04:12 PM »

I've not done a whole set of reeds, but I've certainly taken individual reeds down by a semitone with solder very successfully.
Graham

Does lead free solder take to reed steel? Leaded solder seems to have disappeared.
Logged
Greg Smith
DG/GC Pokerwork, DG 2.4 Saltarelle, pre-war CF Hohner, Hohner 1040 Vienna style, old  BbEb Hohner that needs a lot of work.

ACCORDION, n. An instrument in harmony with the sentiments of an assassin. Ambrose Bierce

Gonk

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 507
  • (Mudlark Music)
    • Mudlark Music
Re: Tuning down reeds a semitone
« Reply #7 on: February 24, 2021, 06:33:08 PM »

Greg, lead-free is working for me.  I am using flux, that seems to help.
Logged
Mudlark Music - restoration, repairs, lessons, and sales.  (USA)  http://mudlark-music.com

Willem Feltkamp

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 129
  • Tinkering and playing diatonics and CBA
Re: Tuning down reeds a semitone
« Reply #8 on: February 24, 2021, 08:53:10 PM »

Everyone thanks for sharing your experience and ideas.
I've done some test soldering on an old accordion reed, and was surprised to learn I'd tuned it down by a sixth! I'm not sure though if it will still speak properly. But it seemed to eliminate any problem I should have of missing reeds, since I have a lot of spare accordion reeds.
I read on the internet I should not use flux while soldering, since it makes the metal corrode. Any thoughts on that?

I also considered glueing two half reed plates together, and I read someone's already done that!

I've made my purpose clear in another post: my question was related to the idea of turning a C/F Hohner Club into a G/C with accidentals.
Today I've made a chart of the pitches of all reeds in their current configuration. Next steps: charting the desired new configuration, check how many reeds I can simply move, and how many will have to be retuned.

Also, I'll have to check the length of the reed chambers. Gradually this plan is beginning to seem like a pretty far-fetched idea.
But after I've worked the plan out on paper, I'll see if I still feel like going for it.

Willem
Logged

Tone Dumb Greg

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4955
    • Dartmoor Border Morris
Re: Tuning down reeds a semitone
« Reply #9 on: February 24, 2021, 09:28:34 PM »


...Also, I'll have to check the length of the reed chambers. Gradually this plan is beginning to seem like a pretty far-fetched idea.
But after I've worked the plan out on paper, I'll see if I still feel like going for it.

Delicate surgery with a scalpel can help realise possibilities.
I've seen card used to blank off bigger gaps, as well (but never tried it).
Logged
Greg Smith
DG/GC Pokerwork, DG 2.4 Saltarelle, pre-war CF Hohner, Hohner 1040 Vienna style, old  BbEb Hohner that needs a lot of work.

ACCORDION, n. An instrument in harmony with the sentiments of an assassin. Ambrose Bierce

Gonk

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 507
  • (Mudlark Music)
    • Mudlark Music
Re: Tuning down reeds a semitone
« Reply #10 on: February 24, 2021, 09:39:13 PM »

I have a box on my bench full of popsicle/lolly sticks.  I was amused when I joined this forum to find I wasn't alone.  Changing reedblock sizes (both axis) is one of their many uses.

Embiggening gaps is a little harder, I use a very sharp carbon steel knife.  I think that often the wood grain is in one's favor in the Hohners, since the interstitial bits are set in small dado cuts, with the grain of the wood running lengthwise - so you can score the sides, press a knife partway down, and give a gentle twist, and usually a nice rectangular flake will come off the top.

Will be following with curiosity if you try this project!  : D
Logged
Mudlark Music - restoration, repairs, lessons, and sales.  (USA)  http://mudlark-music.com

Squeaky Pete

  • Squeaky Pete
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1327
  • Re-hohn a Hohner
Re: Tuning down reeds a semitone
« Reply #11 on: February 24, 2021, 10:23:17 PM »

I'm turning a CF club box into a full 3 row GC and there are a lot of reeds that need a little flattening. I don't mind sharpening a semitone by filing and the occasional one flattening by filing, but generally I prefer a blob of solder.
I can't detect any loss of quality of sound by flattening this way. I don't go further than 4 semitones, usually just 2 unless they are the very low reeds that I can't do any other way.
There is a lot of work though, and I wish I'd had a set of redundant Bb/Eb handy to help make up the G row.
Logged
Poker work DG.
Pariselle 2.6 DG, Ex-Club IIIBS CF,
Matching Liliputs in CF and DG,
Lots of sickly Hohners needing TLC,
Bassoon, Various Bagpipes........
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal