Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1] 2 3 4 5   Go Down

Author Topic: 'Wah-wah' tremolo issues  (Read 9034 times)

0 Members and 1 Guest are viewing this topic.

mselic

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1683
'Wah-wah' tremolo issues
« on: February 27, 2021, 07:14:37 PM »

I recently acquired an absolutely lovely 1950s Paolo Soprani D/C# 19 button, 2-voice box.  It's a keeper!  It sounds and plays great, however I've noticed that the tremolo on several of the lower notes has that unpleasant 'wah-wah' effect. Rather than it having a nice, steady beat, the tremolo dips back and forth rather suddenly.  This is a problem that I have always been able to fix with a stablizer bar between the blocks or a brace across the top of them, but this one already has a brace and that doesn't solve the issue.  The previous owner had tuned it rather dry (5-7 cents), and I've since increased it a little to about +9/10 but that hasn't made any difference.

The only thing that made a difference was changing the valves.  That fixed the problem in some spots, but it then persisted elsewhere.  The problem also intermittently returns on the reeds where the problem was 'fixed'.  Here are the things I've done/checked to try and get to the source of the problem:

-new wax

-new valves (plastic replaced the old leathers)

-reed gap set equally on both sets of reeds for simultaneous start

-added/removed stabilizer bars/braces (removing all bracing results in a mess - everything goes pretty dry)

-checked to make sure bottom of blocks is flat, soundboard is flat, good fit between the two.  No air loss.

-adjusted the amount of force that fastens the blocks down, made sure blocks are secure (but not too tight either)

-tightened all reed tongue rivets

-made sure reedplates are secured, no gaps in wax, no fouled valves, reed tongues, etc

I've probably done more but can't remember at this point! I've carefully examined and experimented with everything I can think of, and I can't get to the root of the problem.  Help!

Logged
C#/D player

playandteach

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3526
  • Currently a music teacher in a high school.
Re: 'Wah-wah' tremolo issues
« Reply #1 on: February 27, 2021, 08:56:33 PM »

This is an extreme suggestion, and I can quite see several reasons for shooting it out of the water...
but if you're desperate: assuming that the two voices are 'on' all the time, is it worth trying to tune the reeds the other way round? so that the normally sharp one is dead in tune, and tune the normal one sharp instead?
Only if other ideas don't come through.
You could avoid retuning by removing the pair and placing them in the other blocks to see. Need only try it with one pair to start with.
« Last Edit: February 27, 2021, 08:58:07 PM by playandteach »
Logged
Serafini R2D2 GC, Serafini GC accs 18 bass

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: 'Wah-wah' tremolo issues
« Reply #2 on: February 28, 2021, 12:52:33 AM »

Matt, this is really annoying when it does occur. I'm fairly sure the wah-wah effect is due to something in the whole set-up vibrating with a strong resonant frequency. Somehow you have to destroy or baffle that extreme resonance. You seem to have tried all the things I would have done.

Of all the possibilities you have listed, the one I have found which is most likely to cure, or at least lessen, the wah-wah effect, is the checking and tightening of the anchor points at each end of the reed block - try various combinations of slacken one end, tighten the other, tighten both, etc. Also, try installing one or two additional reed block braces in different places along the length of the reed blocks.

P&T's suggestion of swapping the reed plates around is also a good one, and worth trying.

The extreme resonance could also be responding to a particularly strong fundamental frequency in the reeds, with little strength from the other harmonics. If you have GarageBand, the EQ option also includes a harmonic spectrum visualiser which might be useful to check these rogue reeds.

Anything you can do to minimise any overly strong harmonic would help solve the problem. I wonder whether changing the original leather valves for vinyl valves has exacerbated the resonance. Perhaps the solution might be replace (again!) all the valves with new leather ones.

Good luck! Let us know how you get on. 
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

mselic

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1683
Re: 'Wah-wah' tremolo issues
« Reply #3 on: February 28, 2021, 06:35:46 AM »

Frustrating it is, Steve!

I played around extensively with adjusting the tightness of the two anchor points on each reedblock.  Making adjustments here most certainly makes a difference, although it never fully solves the problem.  I may be able to 'fix' a few of the 'bad' notes, but then it just creates the same problem somewhere else along the block/keyboard.  The best I could get it was to have all sides fastened down snug, at which point the worst of it is relegated to just a few notes centered around G, G#.

Regarding braces, I tried as many as three across the top of the blocks and in different locations, but only one brace seemed to make any difference, and obviously it didn't fully correct the problem.

Swapping reed plates (switching locations of the 0 and + reeds) didn't make any real difference, but thank you for that suggestion P & T!

Replacing the leather valves with plastic ones seemed to actually CORRECT the problem for a while, but the issue quickly returned.  I experimented with trying different sizes and kind of valves but it never made the problem go away.

At one point I replaced both reeds of a particular note with spare Hohner reeds.  This actually fixed the problem with that note, however the tone of the Hohner reeds really stuck out compared to the others.

The tuning of the reeds also didn't make a difference.

At this point I have to just walk away for a while.  I've spent far too many hours over the last two days trying to to problem-solve this!  Swapping out reeds will be the next thing I try, but not today...
Logged
C#/D player

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: 'Wah-wah' tremolo issues
« Reply #4 on: February 28, 2021, 08:44:14 AM »

I’d be frustrated by this too.  One thing I might be looking at is to check if a reed tongue is swinging far enough to touch the inside of a reed chamber, or if any inside valves are touching reed chamber walls. I don’t think it’s this because you say the problem moves to different reeds  when you change bracing and adjust fixing points,  but at this stage you have to check the unlikely causes too. 

I would also be getting my hand lens out to look at the edges of the reed tongues at the rivet end to look for any contamination there. 

When you tightened the reed rivets did you check that the Reed tongues remained central with the same gap at either side, and at the tip? Uneven gaps can produce strange effects.
« Last Edit: February 28, 2021, 08:50:01 AM by Theo »
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

playandteach

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3526
  • Currently a music teacher in a high school.
Re: 'Wah-wah' tremolo issues
« Reply #5 on: February 28, 2021, 09:12:42 AM »

Can I suggest another left field thing as this reminds me of bike noises where you are convinced that you have a squeaky bottom bracket only to eventually find out that it's your shoe cleat.
Have you tried removing the bass reed blocks in case it's setting up some kind of sympathetic vibration there? Good luck.
Logged
Serafini R2D2 GC, Serafini GC accs 18 bass

Malcolm Clapp

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1119
  • Loving my Hohner-reeded wet MMM CastaTommy
Re: 'Wah-wah' tremolo issues
« Reply #6 on: February 28, 2021, 10:08:27 PM »

And even more left field thoughts, have you checked the accuracy of your tuner? Or double checked with another tuner? These things can eventually fail and give false readings. Also check for extraneous vibrations from sources outside of the instrument which the mic in the tuner can be picking up. I remember a loose reflector in an electric heater responsible for a sympathetic vibration causing a false reading on certain notes, and my workshop roller door used to vibrate at somewhere around low D, both taking many hours to discover.
Good luck with solving the problem....
Logged
Tuner/repairer, now retired.

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: 'Wah-wah' tremolo issues
« Reply #7 on: March 01, 2021, 12:21:02 AM »

And even more left field thoughts, have you checked the accuracy of your tuner? Or double checked with another tuner? These things can eventually fail and give false readings. Also check for extraneous vibrations from sources outside of the instrument which the mic in the tuner can be picking up. I remember a loose reflector in an electric heater responsible for a sympathetic vibration causing a false reading on certain notes, and my workshop roller door used to vibrate at somewhere around low D, both taking many hours to discover.
Good luck with solving the problem....

Thanks, Malcolm, but it's none of those things. I know exactly what Matt is describing - it is an acoustic phenomenon which is intrinsic to very specific pairs of reeds and it is present no matter where you play the instrument, whether in one room or another or even in an open field.
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

mselic

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1683
Re: 'Wah-wah' tremolo issues
« Reply #8 on: March 01, 2021, 05:49:15 AM »

I’d be frustrated by this too.  One thing I might be looking at is to check if a reed tongue is swinging far enough to touch the inside of a reed chamber, or if any inside valves are touching reed chamber walls. I don’t think it’s this because you say the problem moves to different reeds  when you change bracing and adjust fixing points,  but at this stage you have to check the unlikely causes too. 

I would also be getting my hand lens out to look at the edges of the reed tongues at the rivet end to look for any contamination there. 

When you tightened the reed rivets did you check that the Reed tongues remained central with the same gap at either side, and at the tip? Uneven gaps can produce strange effects.

I have already checked all of the above and could find no fault, but thank you for those suggestions.

Can I suggest another left field thing as this reminds me of bike noises where you are convinced that you have a squeaky bottom bracket only to eventually find out that it's your shoe cleat.
Have you tried removing the bass reed blocks in case it's setting up some kind of sympathetic vibration there? Good luck.

It's only a 4-bass, so the bass reeds are laid flat and the blocks aren't removeable.

My guess is that different reeds, or even possibly new blocks, might make a difference, but both of those options would change the tone of the box.
Logged
C#/D player

diatonix

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 622
Re: 'Wah-wah' tremolo issues
« Reply #9 on: March 01, 2021, 07:22:56 AM »

I wonder whether a couple of pictures might yield a clue?
Logged

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: 'Wah-wah' tremolo issues
« Reply #10 on: March 01, 2021, 07:26:35 AM »

Matt, do you know, or can you remember, whether the wah-wah tremolo was present when you acquired the instrument? Even if the previous tuning was fairly dry, it would probably have shown up the bad tremolo. If the answer is 'no' then it has come about as a result of the alterations you have since made (and oh, so frustrating, given the amount of time and expertise you have already put in to this work)

I played around extensively with adjusting the tightness of the two anchor points on each reedblock.  Making adjustments here most certainly makes a difference, although it never fully solves the problem.  I may be able to 'fix' a few of the 'bad' notes, but then it just creates the same problem somewhere else along the block/keyboard.  The best I could get it was to have all sides fastened down snug, at which point the worst of it is relegated to just a few notes centered around G, G#.

Regarding braces, I tried as many as three across the top of the blocks and in different locations, but only one brace seemed to make any difference, and obviously it didn't fully correct the problem.
...

All this suggests that it is a rogue resonance problem - like the 'wolf note' which can occur in bowed string instruments, especially the cello. Google "cello wolf note" to see a range of descriptions and remedies, which include adding movable weights to the tail end of one of the strings below the bridge, or magnetic weights to the instrument belly which can be shifted around to try to disrupt the resonance.

These are some interesting descriptions and videos, and may give you some ideas:

https://www.aitchisoncellos.com/taming-wolf-notes/
https://www.youtube.com/watch?v=yFiJXIA70U0
https://www.youtube.com/watch?v=e5YznCPjzZM

Clearly, the sound generation method of the melodeon works differently from the cello, and as has been pointed out many times on this forum, the melodeon has no sound board to amplify the notes. However, I think the resonance of the reed blocks set-ups at certain frequencies is the key to understanding and eliminating, or at least minimising, the wah-wah tremolo.

Story:
I remember having to change a clicky valve on a relatively new Castagnari. It was playing just fine apart from the click, which got annoying. No wah-wah tremolo, at least not that I'd noticed.

So - instrument opened up, brace removed, reed block removed, valve replaced, everything reassembled. Play test: wah-wah tremolo suddenly apparent (argh!) on a pair of reeds near the centre of the block (not the reed which had the replacement valve, that was nearer the lower-pitched end).

Apart from the new valve which was not involved with the wah-wah reeds, the only thing which had changed had to be the relative tensions of the reed block anchor points and the reed block braces. So by adjusting the screw compression on all the anchor points and brace points, I was able to minimise (but perhaps not totally eliminate) the rogue tremolo. It was certainly liveable with, and in ordinary playing it doesn't bother me.

This is enough to convince me that the wah-wah tremolo is caused by a rogue resonance in the reed block set up, akin to the cello wolf tones. What is needed is a method to disrupt that resonance.

An idea:
I haven't tried this yet, but I wonder what the effect would be of adding a extra (moveable?) weight to the top of the reed block(s). Perhaps a strip of wood, or more than one short strips of wood, fixed to the top of the reed block? Perhaps fix in place with Blue-tack first and see what happens, if anything. Perhaps metal disks (coins, washers?) instead of wood strips?
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

playandteach

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3526
  • Currently a music teacher in a high school.
Re: 'Wah-wah' tremolo issues
« Reply #11 on: March 01, 2021, 10:45:27 AM »

Would using some sort of rubber washers under the brace straps be worth trying.
Logged
Serafini R2D2 GC, Serafini GC accs 18 bass

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: 'Wah-wah' tremolo issues
« Reply #12 on: March 01, 2021, 10:53:43 AM »

Would using some sort of rubber washers under the brace straps be worth trying.
Yes - maybe. Anything to disrupt the resonance. Although I have a feeling that it is increased rigidity of the reed entire block assembly which is needed here, not less rigidity. But your rubber washers idea is definitely worth trying - it's easy to do.
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

Graham W

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 277
Re: 'Wah-wah' tremolo issues
« Reply #13 on: March 01, 2021, 11:34:02 AM »

Two comments:
I've been interested to see in more than one instrument tuned to a slow swing by a highly experienced French tuner that great care had been taken to move the factory fitted reed block brace from it's original position, fill the screw holes neatly, and reposition it a short distance away plus a secondary brace (either another strap or pins between the blocks) further along the blocks.
In a similar vein Bertrand Gaillard fits a rigid aluminium angle brace at both ends of the blocks, plus an additional intermediate strap, so linking all the blocks together as a very rigid structure.
I wonder (assume?) if this kind of wah-wah issue is less common, or less intractable, in instruments whose blocks are glued to the fondo?

Steve mentioned Garageband EQ; similarly an oscilloscope or oscilloscope app can show a surprising difference in display for two reeds each tuned to the same pitch and with no audible difference in sound between them. I guess there is something going on with different harmonics that I don't understand and is beyond my hearing to detect but which affects other interactions within the instrument.
On the basis of this I have before now as a last resort swapped a pair of recalcitrant reeds and retuned the M reed to be + and vice versa, which in that case cured the issue.
It's amazing how the most infinitesimal difference or adjustment to something can make an issue appear or disappear.
I would love to understand a lot more about resonance and exactly how everything interacts.

Graham
Logged

Chris Marriott

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1048
Re: 'Wah-wah' tremolo issues
« Reply #14 on: March 01, 2021, 12:14:12 PM »

Interesting discussion. I notice that my Pariselle has a bracing strut connecting the tops of the two treble end reed blocks. Is this likely to be why?

Chris
Logged
Chris

Castagnari Mory, English Concertina and Piano Accordion.

Malcolm Clapp

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1119
  • Loving my Hohner-reeded wet MMM CastaTommy
Re: 'Wah-wah' tremolo issues
« Reply #15 on: March 01, 2021, 12:36:15 PM »

And even more left field thoughts, have you checked the accuracy of your tuner? Or double checked with another tuner? These things can eventually fail and give false readings. Also check for extraneous vibrations from sources outside of the instrument which the mic in the tuner can be picking up. I remember a loose reflector in an electric heater responsible for a sympathetic vibration causing a false reading on certain notes, and my workshop roller door used to vibrate at somewhere around low D, both taking many hours to discover.
Good luck with solving the problem....

Thanks, Malcolm, but it's none of those things. I know exactly what Matt is describing - it is an acoustic phenomenon which is intrinsic to very specific pairs of reeds and it is present no matter where you play the instrument, whether in one room or another or even in an open field.

Steve, I think you may have misinterpreted my post. I wasn't suggesting that an external vibration was directly causing the "wah-wah", but that it may have affected the tuner input accuracy and/or, causing some false readings.

I am aware of an acoustic phenomenon that tends to cause the reverse of Matt's situation, where a fairly wet tuned box develops a couple of reed pairs that sound very dry. It has been discussed before, and improved bracing of the reed blocks seems to be the answer to that one. However, I've only once struck the problem described by Matt, and checking the tuning against a different tuner threw up some surprising errors of iirc 20cents or more.

Incidentally, Matt does not list "re-checking the tuning" as something he has tried; maybe just an omission from the list, but would seem a good starting point if this indeed hasn't been done....
Logged
Tuner/repairer, now retired.

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: 'Wah-wah' tremolo issues
« Reply #16 on: March 01, 2021, 12:53:38 PM »

Steve, I think you may have misinterpreted my post. I wasn't suggesting that an external vibration was directly causing the "wah-wah", but that it may have affected the tuner input accuracy and/or, causing some false readings.

Ah yes - I see, thanks for the clarification.

However, in my own case, where I've noticed this rogue tremolo, the tuner has been fine, in that it has enabled me to correctly and accurately tune all the other reeds, so I don't think a faulty tuner is really the problem. I suspect this is also the case with Matt's problem.  But I take your point about checking the tuner. Have just done this with mine using a real A=440 tuning fork, and my tuner (Peterson iStrobosoft) is bang on. 

Quote
I am aware of an acoustic phenomenon that tends to cause the reverse of Matt's situation, where a fairly wet tuned box develops a couple of reed pairs that sound very dry. It has been discussed before, and improved bracing of the reed blocks seems to be the answer to that one.

Yes, agreed. That is due to the two reeds 'pulling together' by acoustic coupling, resulting in a unison sound. It usually occurs when trying to tune with too little tremolo, especially on the mid to higher pitch reeds. The remedy, as you mention is (a) to fit a brace and (b) not to attempt too slow a tremolo. My experience is that if you attempt to tune the two reeds to less than approx. 2.5 cents apart, they will pull together to a unison.

But this is different problem from the wah-wah, wolf tone, tremolo, which affects reeds while still having an audible/measurable tremolo.
« Last Edit: March 01, 2021, 12:55:57 PM by Steve_freereeder »
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

mselic

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1683
Re: 'Wah-wah' tremolo issues
« Reply #17 on: March 02, 2021, 05:26:46 AM »

Quote
Matt, do you know, or can you remember, whether the wah-wah tremolo was present when you acquired the instrument?

Yes, the problem was there right from the beginning - it was the first thing I noticed, and the reason that I opened it up.

Quote
I haven't tried this yet, but I wonder what the effect would be of adding a extra (moveable?) weight to the top of the reed block(s). Perhaps a strip of wood, or more than one short strips of wood, fixed to the top of the reed block? Perhaps fix in place with Blue-tack first and see what happens, if anything. Perhaps metal disks (coins, washers?) instead of wood strips?

I played around with this a little, although not extensively.  At one point today, whilst playing the instrument, I noticed that the same problem that had been isolated to a few of the lower notes suddenly developed higher up the scale as well.  I ended up putting the second brace back in and that actually took care of the problem with the higher notes for the most part (I had placed a second, then a third brace in the box at one point when trying to correct the initial problem, but ended up removing all but the one brace when I found they weren't making any difference).  It was interesting to note that the problem had developed without me having changed anything - I hadn't been messing around inside the box, simply playing it.  The whole thing seems to be a little unstable in general.

Btw, the tuning on this is not dry.  It was originally at around +7 cents when I got it, and I've since tuned it up to around +10.  And the tuner that I use has nothing to do with the problem I'm describing, as Steve has already pointed out.  This is an acoustic phenomenon related to resonance within the blocks/reeds/box that is clearly audible to the ears and is rather unpleasant to hear.

Would using some sort of rubber washers under the brace straps be worth trying.
Yes - maybe. Anything to disrupt the resonance. Although I have a feeling that it is increased rigidity of the reed entire block assembly which is needed here, not less rigidity. But your rubber washers idea is definitely worth trying - it's easy to do.

I agree, Steve.  I'm thinking of gluing in a couple of small pieces of wood next to the blocks and then strapping them down into those.  It might create some more rigidity that perhaps the fastening points at either end of the block are failing to do.  Can't hurt to try at this point.

Diatonix - I will get some photos up tomorrow.
« Last Edit: March 02, 2021, 05:29:34 AM by mselic »
Logged
C#/D player

tirpous

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1403
Re: 'Wah-wah' tremolo issues
« Reply #18 on: March 02, 2021, 06:00:28 AM »

Silly questions, maybe:
- is it happening on both blocks or just one ?
- is it happening with block (s?) on tuning bellows or only 'in situ' ?
- what/where is gasket material ? leather, felt, on fondo or on blocks ?
- no leaks between adjacent chambers on the block(s) ??
Logged

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: 'Wah-wah' tremolo issues
« Reply #19 on: March 02, 2021, 07:01:35 AM »

Interesting discussion. I notice that my Pariselle has a bracing strut connecting the tops of the two treble end reed blocks. Is this likely to be why?
Yes - that's the reason, to prevent unwanted tremolo effects and also stop the reeds 'pulling together'. Installing a reed block brace is very common (and usually effective!) practice.
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk
Pages: [1] 2 3 4 5   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal