Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: 1 [2] 3 4 5   Go Down

Author Topic: 'Wah-wah' tremolo issues  (Read 9078 times)

0 Members and 1 Guest are viewing this topic.

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: 'Wah-wah' tremolo issues
« Reply #20 on: March 02, 2021, 07:09:46 AM »

Silly questions, maybe:
- is it happening on both blocks or just one ?
- is it happening with block (s?) on tuning bellows or only 'in situ' ?
- what/where is gasket material ? leather, felt, on fondo or on blocks ?
- no leaks between adjacent chambers on the block(s) ??
Not silly questions at all.

Quote
- what/where is gasket material ? leather, felt, on fondo or on blocks ?

I wonder if this might have a bearing on the problem. If the gasket material is old and a bit compressed, it may be contributing to a lack of rigidity, even though it remains sufficient to stop noticable loss of air. Perhaps renewing the gasket between the fondo and the base of the reed blocks will help. A fresh gasket will allow the reed blocks to bed in to it.
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: 'Wah-wah' tremolo issues
« Reply #21 on: March 02, 2021, 08:58:02 AM »

This is a well known phenomenon among experienced tuners.  It is indeed a resonance effect as far as we know.  It happens when a natural frequency of some part of the instrument, usually the reed blocks, is the same as one of the reeds.  Some of the vibration energy of the reed then gets absorbed by the  resonating part.  Fixing a bridge to link the blocks works because it changes the resonant frequency.    How much it changes by is unpredictable,  but usually it works like a charm.  It is a trial and error process so not surprising that occasionally it doesn’t work immediately.  I had a similar problem recently with a fairly new Castagnari.  It had the factory fitted bridge linking all three blocks and I had to fit a second bridge close to the problem note, which brought back the correct sound.
« Last Edit: March 15, 2021, 03:31:36 PM by Theo »
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Anahata

  • This mind intentionally left blank
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 6767
  • Oakwood D/G, C/F Club, 1-rows in C,D,G
    • Treewind Music
Re: 'Wah-wah' tremolo issues
« Reply #22 on: March 02, 2021, 09:23:54 AM »

If that is the case (and it seems likely) maybe firmly attaching a weight like a strip of dense metal along the edge of the reedblock will lower the resonant frequency enough to stop the problem.
Logged
Слава Україні !
Music recording and web hosting: www.treewind.co.uk
Mary Humphreys and Anahata: www.maryanahata.co.uk
Ceilidh band: www.barleycoteband.co.uk

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: 'Wah-wah' tremolo issues
« Reply #23 on: March 02, 2021, 11:38:52 AM »

Adding weight might work for that reason so well worth trying.  The point I was trying to make was that the ways we use to change the resonant frequency are unpredictable, and this would apply to adding weight as much as to adding braces.  Intuitively I would expect the braces would increase the stiffness of the system and therefore would raise the resonant frequency.  Adding weight would lower it, so using both methods might be counter productive.  If I was faced with this particular situation I would first try adding weight without having any braces between the blocks.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

hickory-wind

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 627
  • Lives in NY USA near the Erie Canal
    • Bellingers' Button Boxes
Re: 'Wah-wah' tremolo issues
« Reply #24 on: March 02, 2021, 01:27:33 PM »

Here is a video demonstrating 'before and after' of a wah-wah issue on an old Wilkinson's Excelsior I filmed 5 years ago:

https://youtu.be/fbHIZMrQydo

I have refined my anti-resonance crossbar since then.

Scott
Logged
too many boxes...please buy one, or two, or

hickory-wind

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 627
  • Lives in NY USA near the Erie Canal
    • Bellingers' Button Boxes
Re: 'Wah-wah' tremolo issues
« Reply #25 on: March 02, 2021, 02:13:44 PM »

Here is a picture of my Wah Locator. I can try different locations to find the best result. It is flat enough that I can even close up the box with it inside.
Logged
too many boxes...please buy one, or two, or

hickory-wind

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 627
  • Lives in NY USA near the Erie Canal
    • Bellingers' Button Boxes
Re: 'Wah-wah' tremolo issues
« Reply #26 on: March 02, 2021, 02:24:28 PM »

I make my own crossbars out of thin walled aluminum tubing. I have found Castagnaris with a crossbar that still allowed resonance. I have a picture side by side. The round tubing is very stiff between the flattened attachment points. Replacing the factory flat sheet metal bar with my 3D crossbar eliminated the problem. I show a picture of a Czech style box (Mervar, Cleveland, Ohio) currently in my shop that needed two bars. Side note-the Mervar is 3 voice MMM but with the three voices arranged in a triad like chords! The treble pallets are triangular.
« Last Edit: March 02, 2021, 02:41:13 PM by hickory-wind »
Logged
too many boxes...please buy one, or two, or

hickory-wind

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 627
  • Lives in NY USA near the Erie Canal
    • Bellingers' Button Boxes
Re: 'Wah-wah' tremolo issues
« Reply #27 on: March 02, 2021, 02:29:35 PM »

To flatten the ends (and middle if 3 blocks) I use needlenose pliers. To preclude creating a stress riser at a single line of transition from round to flat I ground two vee grooves on top and bottom of one side of the jaws so as I flatten it leaves a strengthening rib in the middle of the crease. Third picture is punching the screw hole.

I have noticed that most issues I've found are on the 2nd, 3rd or 4th reeds from the low end.

Scott
« Last Edit: March 02, 2021, 02:34:55 PM by hickory-wind »
Logged
too many boxes...please buy one, or two, or

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: 'Wah-wah' tremolo issues
« Reply #28 on: March 02, 2021, 03:02:02 PM »

Scott - this is all very interesting indeed. It seems as though you have hit on a reliable solution. Thank you for sharing your account and the photos.
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

Gonk

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 507
  • (Mudlark Music)
    • Mudlark Music
Re: 'Wah-wah' tremolo issues
« Reply #29 on: March 02, 2021, 03:10:06 PM »

Agreed.  If you're looking for a brand name, may I suggest: The original Bellinger Why-Babytm Wah Wah Clamp
Logged
Mudlark Music - restoration, repairs, lessons, and sales.  (USA)  http://mudlark-music.com

tirpous

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1403
Re: 'Wah-wah' tremolo issues
« Reply #30 on: March 02, 2021, 04:06:07 PM »

More questions, if I may:

- in general, are these problem-causing resonances occurring at audio frequencies (reed note) or are they subaudio/mechanical due to the beat between 2 reeds ?

- the remedial straps always seem to bridge the top of adjacent blocks.  Would it be possible/useful to have a strap going from top of block to some rigid part of the casing instead ?
Logged

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: 'Wah-wah' tremolo issues
« Reply #31 on: March 02, 2021, 05:05:00 PM »

- in general, are these problem-causing resonances occurring at audio frequencies (reed note) or are they subaudio/mechanical due to the beat between 2 reeds ?

It's an amplitude thing. The unwanted resonance causes a huge amplitude swing at the beat frequency of the two reeds, so the beats sound alternatively very loud and then very soft. You can hear the effect in Scott's video previously posted:

Here is a video demonstrating 'before and after' of a wah-wah issue on an old Wilkinson's Excelsior I filmed 5 years ago:
https://youtu.be/fbHIZMrQydo
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: 'Wah-wah' tremolo issues
« Reply #32 on: March 02, 2021, 05:12:19 PM »

https://youtu.be/fbHIZMrQydo
I have refined my anti-resonance crossbar since then.

OK - I would not be too keen on fitting a wide crossbar as you have shown
(a) I think it would have a muting effect (but perhaps you can confirm/deny?)
(b) It would make accessing the reeds for tuning in situ very diifficult, if not impossible. I would be loth to tune the reeds with the brace removed, as the pitch would change as soon as you refit the brace.

So perhaps a wide 'skeleton' brace is needed with sufficient distance between the bars to minimise (a) and allow (b).

Have you abandoned the wide crossbar in favour of the aluminium tube braces as shown in your other photos?
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

Anahata

  • This mind intentionally left blank
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 6767
  • Oakwood D/G, C/F Club, 1-rows in C,D,G
    • Treewind Music
Re: 'Wah-wah' tremolo issues
« Reply #33 on: March 02, 2021, 05:20:13 PM »

- in general, are these problem-causing resonances occurring at audio frequencies (reed note) or are they subaudio/mechanical due to the beat between 2 reeds ?
They will be at reed frequencies.

Quote
- the remedial straps always seem to bridge the top of adjacent blocks.  Would it be possible/useful to have a strap going from top of block to some rigid part of the casing instead ?
I think it's a matter of practical convenience. The strap between the blocks is easy to fit, and the main direction in which rigidity is required is directly along the line of the strap between the blocks.

I was going to suggest a rectangular tab of sheet metal fixed at the corners to the blocks, but I see that's exactly what Scott has used successfully. That might be because it's providing torsional stiffness to both blocks, because as Ian Dedic has pointed out before, the vibrations are at least partly torsional.

I'm also wondering, following from my earlier suggestion of adding weight, whether there's a combination of materials that would damp the resonance effectively by absorbing energy, instead of just changing the frequency.
Logged
Слава Україні !
Music recording and web hosting: www.treewind.co.uk
Mary Humphreys and Anahata: www.maryanahata.co.uk
Ceilidh band: www.barleycoteband.co.uk

hickory-wind

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 627
  • Lives in NY USA near the Erie Canal
    • Bellingers' Button Boxes
Re: 'Wah-wah' tremolo issues
« Reply #34 on: March 02, 2021, 07:04:10 PM »

https://youtu.be/fbHIZMrQydo
I have refined my anti-resonance crossbar since then.

OK - I would not be too keen on fitting a wide crossbar as you have shown
(a) I think it would have a muting effect (but perhaps you can confirm/deny?)
(b) It would make accessing the reeds for tuning in situ very diifficult, if not impossible. I would be loth to tune the reeds with the brace removed, as the pitch would change as soon as you refit the brace.

So perhaps a wide 'skeleton' brace is needed with sufficient distance between the bars to minimise (a) and allow (b).

Have you abandoned the wide crossbar in favour of the aluminium tube braces as shown in your other photos?

Exactly. I immediately abandoned it for my current tubular bars. Much easier to access the reeds as you said. If you look back at earlier videos on my Youtube channel you will see many cases where I use them.

Scott
« Last Edit: March 02, 2021, 10:08:19 PM by hickory-wind »
Logged
too many boxes...please buy one, or two, or

mselic

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1683
Re: 'Wah-wah' tremolo issues
« Reply #35 on: March 03, 2021, 05:32:22 AM »

Silly questions, maybe:
- is it happening on both blocks or just one ?
- is it happening with block (s?) on tuning bellows or only 'in situ' ?
- what/where is gasket material ? leather, felt, on fondo or on blocks ?
- no leaks between adjacent chambers on the block(s) ??

-It happens on both blocks, usually around the same spot in each block (ie if the problem is occuring in one spot on one block, the same or similar spot on the next block is affected, too)

-It happens in situ...the tuning bellows I have I only use for checking individual notes, and I use it seldomly, so I can't really say.

-gasket material is on the fondo and is leather.

-there are no leaks between adjacent chambers in blocks (I checked)


Scott, I watched your video a few days ago when I was first trying to find a solution to my problem.  So far, no amount or arrangement of braces has eliminated the problem completely, although having one at least most certainly makes a difference.  I'm attaching a photo that shows the blocks with *four* separate braces spread out over the length of the blocks while attempting to troubleshoot it.

Regarding weights...I experimented this evening with adding weights to the blocks...individually, together, various locations, etc.  Nothing seemed to make a difference, which was surprising.  There isn't much room to add anything to the one block because it interferes with the bellows.  I also tried shimming between the blocks and the fondo at the each end where the gasket ends in case that was an issue, as well as shimming between the edge of the block and the frame...you never know...

One thing that has been very frustrating in this is that the issue seems to be somewhat unstable, in that one moment it may not sound so bad, and then the next it becomes much more pronounced, regardless of bellows pressure, etc. A few times, after adjusting something or adding a brace, I thought I had solved the problem, only to discover it had returned a minute later.  I wonder if humidity levels are having an impact on this old instrument, even though there doesn't seem to be anything coming apart.  The fondo is plywood, btw - no cracks or uneven surfaces like you might get with solid wood.

I'm attaching some photos to show the inside of the box.
« Last Edit: March 03, 2021, 05:41:23 AM by mselic »
Logged
C#/D player

mselic

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1683
Re: 'Wah-wah' tremolo issues
« Reply #36 on: March 03, 2021, 05:35:41 AM »

More photos illustrating each end of the one block.  Each end can be fastened down.
Logged
C#/D player

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: 'Wah-wah' tremolo issues
« Reply #37 on: March 03, 2021, 08:14:10 AM »

It does seem as if this is not the usual resonance problem, but something else. When I’ve had similarly frustrating attempts to fix a problem there has usually been a “doh” moment when I’ve realised I’ve been looking at things the wrong way.  I’m sorry I don’t have that fresh viewpoint for you but two suggestions that haven’t been mentioned.

1 Fixing screws on old Italian boxes can be quite  stiff to turn. When you think the clamp is tight it’s just the screw binding.

2 is the opposite.  If end clamps are too tight this can distort the reed blocks *and* the reed plates leading to slight contact between reed tongue and plate.  I’ve occasionally experienced this with reeds that have very close edge gaps.  It does fit your symptoms because it comes and goes with very slight differences in tightness of the clamps.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

playandteach

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3526
  • Currently a music teacher in a high school.
Re: 'Wah-wah' tremolo issues
« Reply #38 on: March 03, 2021, 09:57:52 AM »

Could the distortion Theo's talking about be made worse because the gasket doesn't extend into the clamping zone? It might be that the blocks are arching slightly under the clamping force if there's that tiny void at each end. A simple leather shim would be an easy check.
I appreciate that I'm not experienced in these things but sometimes that's the fresh approach needed.
Logged
Serafini R2D2 GC, Serafini GC accs 18 bass

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: 'Wah-wah' tremolo issues
« Reply #39 on: March 03, 2021, 10:45:34 AM »

Could the distortion Theo's talking about be made worse because the gasket doesn't extend into the clamping zone? It might be that the blocks are arching slightly under the clamping force if there's that tiny void at each end. A simple leather shim would be an easy check.

I think Matt has already tried that:
...  There isn't much room to add anything to the one block because it interferes with the bellows.  I also tried shimming between the blocks and the fondo at the each end where the gasket ends in case that was an issue, as well as shimming between the edge of the block and the frame...you never know...

Quote
I'm attaching some photos to show the inside of the box.

In photo nos. 6768 and 6761 it looks as if the wood supports at both ends which carry the screws for the reed block clamps do not have much glue in the joins with the instrument plywood ends. I wonder if it is worth running some superglue (low viscosity, penetrates well) into the join and then a final bead of PVA glue at the angle at the top of the join. It could help suppress any resonant vibration due to the wooden supports not being rigidly attached.
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk
Pages: 1 [2] 3 4 5   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal