Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: 1 2 [3] 4 5   Go Down

Author Topic: 'Wah-wah' tremolo issues  (Read 9115 times)

0 Members and 1 Guest are viewing this topic.

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: 'Wah-wah' tremolo issues
« Reply #40 on: March 03, 2021, 11:05:34 AM »

Another thing to check:

Is the base plate of the reed block firmly glued to the upright reed chamber assembly? Difficult to tell, I know, with the reed plates attached with wax, but it might be possible to see flexure if you try gently twisting or bending the reed block base. Any zone of looseness can affect the tuning and possibly set up unwanted resonance vibrations.

There was an instance with a Castagnari a year or so ago where the reed block base started coming adrift due to lack of glue. It wasn't easy to see at first, but the initial clue came from the reeds not holding their tuning properly. Extra glue eased into the loose join solved the problem.
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

hickory-wind

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 627
  • Lives in NY USA near the Erie Canal
    • Bellingers' Button Boxes
Re: 'Wah-wah' tremolo issues
« Reply #41 on: March 03, 2021, 01:56:33 PM »

My suggestion is just completely replacing first one, then both of the offending note reedplates. It is a 10 minute test that can reveal a lot. Of course I have a large collection of spares so it's easy for me to do. It gives a clear fork in the road of reeds versus supporting structure.
 
Logged
too many boxes...please buy one, or two, or

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: 'Wah-wah' tremolo issues
« Reply #42 on: March 03, 2021, 02:17:56 PM »

My suggestion is just completely replacing first one, then both of the offending note reedplates. It is a 10 minute test that can reveal a lot. Of course I have a large collection of spares so it's easy for me to do. It gives a clear fork in the road of reeds versus supporting structure.

Yes, all very well, but Matt has reported that the rogue tremolo can shift between different notes depending on where the braces are mounted. It's not just limited to one pair of reeds all the time.
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

Trevor Henderson

  • Good talker
  • **
  • Offline Offline
  • Posts: 55
  • Tender Buttons
Re: 'Wah-wah' tremolo issues
« Reply #43 on: March 03, 2021, 02:27:46 PM »

He stated earlier that he replaced two offending notes with hohner  reeds and that fixed the problem but they sounded out of place. The fact that different reeds can act up at different times suggests a possible box haunting.
Logged

mselic

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1683
Re: 'Wah-wah' tremolo issues
« Reply #44 on: March 04, 2021, 02:02:21 AM »

It does seem as if this is not the usual resonance problem, but something else. When I’ve had similarly frustrating attempts to fix a problem there has usually been a “doh” moment when I’ve realised I’ve been looking at things the wrong way.  I’m sorry I don’t have that fresh viewpoint for you but two suggestions that haven’t been mentioned.

1 Fixing screws on old Italian boxes can be quite  stiff to turn. When you think the clamp is tight it’s just the screw binding.

2 is the opposite.  If end clamps are too tight this can distort the reed blocks *and* the reed plates leading to slight contact between reed tongue and plate.  I’ve occasionally experienced this with reeds that have very close edge gaps.  It does fit your symptoms because it comes and goes with very slight differences in tightness of the clamps.

1 - the screws do manage to tighten the block.  I check to see if there is any movement from the block, and once fully fastened down, there isn't.  Loosening the screws begins to allow some upward/downward movement, which brings me to #2...

2 - I've found that the problem is least present when the block is fastened as tight as it can go on both ends.  As I loosen the two anchor points, the problem begins to occur in more places than one and also begins to shift locations (ie if buttons 4 on both rows were affected, loosening the blocks slightly means the problem may shift to the adjacent buttons, leaving buttons 4 suddenly sounding better.  If I continue to loosen the fastening points, the problem eventually becomes much more pronounced all over the place, with some reeds that have plenty of tremolo suddenly sounding almost in unison)

Quote
In photo nos. 6768 and 6761 it looks as if the wood supports at both ends which carry the screws for the reed block clamps do not have much glue in the joins with the instrument plywood ends. I wonder if it is worth running some superglue (low viscosity, penetrates well) into the join and then a final bead of PVA glue at the angle at the top of the join. It could help suppress any resonant vibration due to the wooden supports not being rigidly attached.

I had that same thought at one point but in a different location.  I had run out of superglue, so I used PVA instead which I think only served to seal the joints as you mentioned.  I think I will revisit this with a low viscosity glue and see if I can squeeze that in anywhere that looks like it could use it.  Good thinking, Steve.  I'll see if that helps.

He stated earlier that he replaced two offending notes with hohner  reeds and that fixed the problem but they sounded out of place. The fact that different reeds can act up at different times suggests a possible box haunting.

It's true that different reeds seemed to make the problem disappear at the time (in the one location), however I didn't leave them in long enough to see if that 'fix' stuck.  It's happened a number of times now where I thought I had solved the issue by changing something, only to discover a few minutes later that the problem returned on its own.

Another thing to check:

Is the base plate of the reed block firmly glued to the upright reed chamber assembly? Difficult to tell, I know, with the reed plates attached with wax, but it might be possible to see flexure if you try gently twisting or bending the reed block base. Any zone of looseness can affect the tuning and possibly set up unwanted resonance vibrations.

There was an instance with a Castagnari a year or so ago where the reed block base started coming adrift due to lack of glue. It wasn't easy to see at first, but the initial clue came from the reeds not holding their tuning properly. Extra glue eased into the loose join solved the problem.

The blocks are solid and look good, but I'll double-check what you're describing.

Logged
C#/D player

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: 'Wah-wah' tremolo issues
« Reply #45 on: March 04, 2021, 08:52:36 AM »

Matt, you have tried so many things, so patiently and yet to no avail.  :(
There is definitely something wrong somewhere, which at the moment is hidden.

If this were my box and I'd got to this stage, I would take a deep breath and start completely over again. A bit soul-destroying, I know, but you can't go on like this.
Strip down everything:

- Take off all the reeds.
- Discard all the valves (even if they look OK).
- Clean off every bit of wax from the reed plates and the reed blocks. Use acetone to be sure of removing any glue or wax reside from the reed tongue root, near the rivet.
- Check all the joins on the reed blocks and on the internal wood components of the casework. Reglue if necessary, or even just as a safeguard.
- Examine minutely with a lens, all the reed tongues, checking for even clearance all the way round. Adjust if necessary.
- Check the internal walls and floors of the reed block chambers, to see if there is any roughness or projection which could cause contact with the reed tongues and/or valves.
- Check the screw holes on the top of the reed blocks, where the braces were fixed. Make sure that they do not penetrate the reed chambers. Fill if necessary. When it comes to refitting the brace(s), use a thin smear of superglue in the screw hole and let it dry before refitting the screw, to ensure good thread tightness. You could also do this on the screw holes of the reed block clamps if they have become a bit loose with all the previous adjustments.

Once you are satisfied with all that, then start to rebuild: new valves throughout, new wax, etc. Test the reeds on the tuning table before installing the reed blocks in the instrument, to ensure all the valves are working properly and not fouling on the sides of the reed chamber. Also that the reed tip gaps are properly set so they all respond together

The real test will be after installing the reed blocks into the instrument and test playing. I would recommend just replacing the original reed block brace in its original position first of all. If all is OK, then proceed to fine tuning.

If, despite all this, the wah-wah tremolo still persists and in different, shifting positions, I would say that the instrument has a serious acoustic mismatch and instability between the existing internal design, positioning and dimensions, and the reeds.  It may be that it would never be right with those combinations. The only other option then would be to completely replace all the reeds. That, or throw the bloody thing out of the window.

Good luck!


Edit:
One more thing to try first:
In photo 6768, there is a big space to the side of the reed blocks. You could try temporarily fixing a thin block or slab of foam or similar, on to the fondo, as a baffle to see if you can disrupt or minimise the inherent acoustic resonance of the internal space. Just be sure that the foam doesn't interfere with the bellows, and is not so close to the reed blocks to cause muting.
« Last Edit: March 04, 2021, 09:09:56 AM by Steve_freereeder »
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: 'Wah-wah' tremolo issues
« Reply #46 on: March 04, 2021, 09:30:32 AM »

That seems extreme Steve, I wouldn't do that.  I would leave the box aside for a while and allow the problem to settle in my mind.  As I suggested earlier this could have a different root cause than the usual resonance problem and needs some reflection time.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: 'Wah-wah' tremolo issues
« Reply #47 on: March 04, 2021, 09:51:33 AM »

That seems extreme Steve, I wouldn't do that.  I would leave the box aside for a while and allow the problem to settle in my mind.  As I suggested earlier this could have a different root cause than the usual resonance problem and needs some reflection time.

'Settle in my mind' time and 'reflection time' are always good ideas and I agree with you. I think the biggest problem we have here, in trying to advise Matt, is that we do not have the instrument in front of us. All we can go on is what he has reported so far, which is a pretty detailed description of what seems to be a thorough investigation. As folks say round here, 'summat's up somewhear, but tha can't see whear it is'.
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: 'Wah-wah' tremolo issues
« Reply #48 on: March 04, 2021, 10:20:06 AM »

Exactly,  or in another language - festina lente

I’m reminded of a job I’ve been working on for several months.  A concertina as it happens, but the principle is the same.  This had several awkward but subtle problems, I’ve now worked through these and the job is just about finished,  not helped by regular pressure from the owner wanting a delivery date. I’ve managed to fend off the customer’s impatience, I hope without offending them😀
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

mselic

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1683
Re: 'Wah-wah' tremolo issues
« Reply #49 on: March 04, 2021, 04:48:50 PM »

Thank you all for the time you've dedicated to helping me troubleshoot this issue - I really appreciate the support and encouragement that this forum brings.  Steve, I will look into the idea of the baffle as you described.

At this point, I think I'm actually inclined to step away from trying to figure it out for the time being.  There comes a point when some detachment is needed, and I certainly think I'm at (or beyond) that point now!  I feel fairly confident that if I stripped the whole box, re-valved, re-waxed, etc. that I would end up in exactly the same spot as I am now.  As Theo mentioned, the solution may very well be outside my current line of thinking, so giving it some space may help other insights arise.  At the moment, the problem rests mainly on a button on the C# row (both directions) and the adjacent button on the D row (push only), so when playing at speed the problem is often sufficiently disguised.  I might as well get some enjoyment playing it as is for now.

I will add to this thread when I have new information to share, although I certainly continue to welcome others' contributions if they feel they have something to add.  Thanks again, everyone : )
Logged
C#/D player

IanD

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1703
  • Too many melodeons...
Re: 'Wah-wah' tremolo issues
« Reply #50 on: March 06, 2021, 11:02:07 AM »

The problem with resonances like this is that not only are they unpredictable -- unless somebody wants to build an accurate 3D model of the complete end of the melodeon, and run it through some mechanical/acoustic analysis software, and even then getting an accurate answer would be difficult -- but anything you try to improve it is almost as likely to make it worse or just move the resonance to a different note as it is to fix it...

The classic methods to fix resonance problems like this -- or at least, move them out of the way -- are to increase stiffness (bracing) to move them up, add mass to move them down, add damping to try and suppress them, or all three. If anyone is into acoustics, exactly the same issues arise with loudspeaker drivers and cabinets, and the solutions are the same. Bracing is probably the best solution, but you have to think what you're actually bracing against what. Links across the reed blocks often (but not always...) work because if there's a resonance in one block the other one is unlikely to have one at the same frequency -- but this doesn't necessarily stop the resonance, it often just moves its frequency -- which is fine unless it then hits another note... :-(

An easy solution which I don't know if anyone has tried and might work in difficult cases (and is easily reversible if it doesn't) is to glue a strip of lead along the top face of the reed-blocks, using an adhesive (maybe that double-sided foam sticky tape?) that doesn't set rock-hard. This adds mass, and both lead and the glue are high-loss materials which would damp any resonances. Any existing reed-block cross-braces can also be used on top of this.
« Last Edit: March 06, 2021, 11:04:00 AM by IanD »
Logged
Oakwood Model 4 D/G, Castagnari Dony D/G/#, Castagnari Tommy G/C, Baffetti Binci D/G, Hohner Preciosa D/G, Melos Bb/Eb, Lightwave SL5 and Kala California fretless basses

hickory-wind

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 627
  • Lives in NY USA near the Erie Canal
    • Bellingers' Button Boxes
Re: 'Wah-wah' tremolo issues
« Reply #51 on: March 07, 2021, 02:59:00 PM »

Good suggestion. Motorcycle wheel balancing weights are chunks of lead with the sticky foam adhesive tape already attached so might be worth looking into.

Example:
https://www.harborfreight.com/1-4-quarter-oz-wheel-weights-67225.html?cid=paid_google|||67225&utm_source=google&utm_medium=cpc&utm_campaign=&utm_content=&gclid=CjwKCAiAkJKCBhAyEiwAKQBCktKlNSkmosZAuOHVV32b34pPycKZH5PsE7J2t4F7nLhyE6KYqB0VwBoCRoIQAvD_BwE

These are already in strip form ready to be split into individual chunks but the foam adhesive runs along the whole strip holding it together.
« Last Edit: March 07, 2021, 03:01:50 PM by hickory-wind »
Logged
too many boxes...please buy one, or two, or

IanD

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1703
  • Too many melodeons...
Re: 'Wah-wah' tremolo issues
« Reply #52 on: March 08, 2021, 12:06:55 PM »

Good suggestion. Motorcycle wheel balancing weights are chunks of lead with the sticky foam adhesive tape already attached so might be worth looking into.

Example:
https://www.harborfreight.com/1-4-quarter-oz-wheel-weights-67225.html?cid=paid_google|||67225&utm_source=google&utm_medium=cpc&utm_campaign=&utm_content=&gclid=CjwKCAiAkJKCBhAyEiwAKQBCktKlNSkmosZAuOHVV32b34pPycKZH5PsE7J2t4F7nLhyE6KYqB0VwBoCRoIQAvD_BwE

These are already in strip form ready to be split into individual chunks but the foam adhesive runs along the whole strip holding it together.

The ones linked to are zinc, not lead. Zinc has much lower mechanical losses than lead, so it's much worse at damping resonances.

Real lead strip (self-adhesive or not) is easy to find, it's used for leaded windows among other things.
Logged
Oakwood Model 4 D/G, Castagnari Dony D/G/#, Castagnari Tommy G/C, Baffetti Binci D/G, Hohner Preciosa D/G, Melos Bb/Eb, Lightwave SL5 and Kala California fretless basses

hickory-wind

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 627
  • Lives in NY USA near the Erie Canal
    • Bellingers' Button Boxes
Re: 'Wah-wah' tremolo issues
« Reply #53 on: March 10, 2021, 01:10:11 PM »

You're absolutely right. My mistake. The ones I use were purchased a while ago before the ban. I didn't realize they have gone to 'lead-free'. These look the same in the picture...I should have read the description.

Matt- any progress?
Logged
too many boxes...please buy one, or two, or

Kon

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 165
Re: 'Wah-wah' tremolo issues
« Reply #54 on: March 14, 2021, 09:32:06 PM »

A slightly random thought, just in case it could be useful: Does taking the grille off make any difference?

I had a couple of off-sounding notes on my Erica, and this evening I found that the problem disappeared when the grille was off - lining the points where the grille meets the chassis of the box with a thin strip of wash leather seems to have gone some way towards solving the issue.

This makes me think that any moving / removable parts, even far-removed from the reeds and reedblocks, could well contribute to unwanted resonances, so it might be helpful to try and strip the box of anything that isn't strictly necessary for it to function and see if it makes a difference?
Logged
GC Erica

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: 'Wah-wah' tremolo issues
« Reply #55 on: March 14, 2021, 09:54:52 PM »

That’s just reminded me of something else.  Do you have a fan operating in your workshop?  An exposed fan spinning near a free reed causes a strange noise.  It has to be within a metre or two.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

tirpous

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1403
Re: 'Wah-wah' tremolo issues
« Reply #56 on: March 14, 2021, 10:19:26 PM »

Quote
It has to be within a metre or two.

In these times of social distancing, 2 meters is said to be safer !  ;D

A peculiar feature of this box is the blocks seem to have square holes vs round holes in the fondo (judging from imprints in the leather).
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: 'Wah-wah' tremolo issues
« Reply #57 on: March 14, 2021, 11:10:01 PM »

Square holes is very common, especially under reed blocks with register slides.

It does jog my memory for another possible factor - air leaks between reed chambers. I’ve occasionally run into odd sounds where air can leak between adjacent reed blocks.  Sometimes damage or defects in the wood of the mid rib can allow air to leak between the reeds on opposite sides of the block and this can disrupt the tremolo.  Badly fitted register slides can allow air to leak into adjacent reed chambers of different pitches.  Usually this manifests as a ghost note,  but it is conceivable that a smaller leak could also disrupt the tremolo. 
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

tirpous

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1403
Re: 'Wah-wah' tremolo issues
« Reply #58 on: March 15, 2021, 02:27:02 AM »

Err, maybe my wording was not clear, I meant square holes in the blocks and smaller round holes in the fondo.  Re-posting Matt's picture to illustrate.
Logged

mselic

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1683
Re: 'Wah-wah' tremolo issues
« Reply #59 on: March 15, 2021, 03:50:31 AM »

No progress, I'm afraid.

The only difference I seem to be able to create is to move the issue up or down a few buttons by changing the amount each end is fastened down.  Wedging solid blocking (like shims) in the tiny gap between reedblock and frame also helped reduce the issue a little.  I also tried adding weight to one of the blocks, then the other, then across both, etc but was not able to fix the problem.  It's quite possible that the weights were not attached rigidly enough, so I'll probably try that again but with a better fastening system.

I shone a light into each of the reed chambers from the bottom of the block (checking for possible leaks between chambers).  In a few cases, I could see a bit of the light bleeding through to the adjacent chamber, however this wasn't in any of the problem spots (I've attached a photo)  The reed chambers of the notes with the tremolo issues have no bleed-through of light from one to the next. 

Tirpous - square holes in the blocks but round holes in the fondo, yes.  No leaks between adjacent holes, though - you can see from the photo you shared that the blocks are seated firmly in the gasket when installed.

Theo - there is no fan running in the workshop.  The issue also occurs regardless of where I play it (I played it the other day in a venue for a recorded TV performance -  the problem follows me wherever I go!  Fortunately, it's not as noticeable when playing at speed, but any sustained 'problem' note stands out, at least to my ear)
« Last Edit: March 15, 2021, 03:57:44 AM by mselic »
Logged
C#/D player
Pages: 1 2 [3] 4 5   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal