Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: 1 2 3 [4] 5   Go Down

Author Topic: 'Wah-wah' tremolo issues  (Read 9141 times)

0 Members and 1 Guest are viewing this topic.

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: 'Wah-wah' tremolo issues
« Reply #60 on: March 15, 2021, 08:38:01 AM »

I’m clutching at straws with those two suggestion yesterday.  I still wonder if air leaks via the register slides might be part of the problem.  What makes me think this is you description of the problem moving when you shim under the blocks and vary the clamping pressure, both of which will make small differences to how the fondo and register housing will move.

Another idea!  I’ve occasionally seen air leaks in older instruments with plywood fondo where air can leak through an internal ply where the grain runs parallel to the Reed block. This can either be due to partial failure of glue, or to small gaps between edge joints in the internal ply.

I’m fairly sure that there is *something* going on here that is in addition to the more common resonance problem, which usually responds immediately to fir getting a link or two between blocks.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

mselic

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1683
Re: 'Wah-wah' tremolo issues
« Reply #61 on: March 15, 2021, 01:07:03 PM »

This box doesn’t have any register slides!
Logged
C#/D player

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: 'Wah-wah' tremolo issues
« Reply #62 on: March 15, 2021, 01:08:41 PM »

Not that then! 

Plywood fondo?
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Squeaky Pete

  • Squeaky Pete
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1327
  • Re-hohn a Hohner
Re: 'Wah-wah' tremolo issues
« Reply #63 on: March 15, 2021, 01:23:48 PM »

Maybe cheat and drive tiny screws from the pallet side of the Fondo into the centre of the reed blocks. Just to make sure the blocks are held firmly over the full length and any stray vibration is minimised.
Then a BIG note on the reed blocks. ;)
Logged
Poker work DG.
Pariselle 2.6 DG, Ex-Club IIIBS CF,
Matching Liliputs in CF and DG,
Lots of sickly Hohners needing TLC,
Bassoon, Various Bagpipes........

tirpous

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1403
Re: 'Wah-wah' tremolo issues
« Reply #64 on: March 15, 2021, 03:26:55 PM »

My main suspects would be the too-short leather gasket and the block mounting points.  It seems to me the current arrangement would create pressure (and rocking...)points at both ends of the leather, with less positive contact elsewhere because the block and fondo will tend to arch away from each other.  I think I see faint crack lines in the fondo, lined up with the ends of the leather - is it a coincidence ?? 

...and maybe they're perfectly OK, but I just don't like the look of the shimmed/bent upwards metal brackets at the fixed end.
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: 'Wah-wah' tremolo issues
« Reply #65 on: March 15, 2021, 03:35:20 PM »

...and maybe they're perfectly OK, but I just don't like the look of the shimmed/bent upwards metal brackets at the fixed end.

They are pretty standard hardware used in the majority of Italian boxes of that sort of age and older.  They are very sturdy, I doubt very much if they are the problem.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

hickory-wind

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 627
  • Lives in NY USA near the Erie Canal
    • Bellingers' Button Boxes
Re: 'Wah-wah' tremolo issues
« Reply #66 on: March 15, 2021, 05:01:09 PM »

Matt-
Can you make a video to share with us?
Logged
too many boxes...please buy one, or two, or

playandteach

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3526
  • Currently a music teacher in a high school.
Re: 'Wah-wah' tremolo issues
« Reply #67 on: March 15, 2021, 07:25:37 PM »

The club iii I had for a while had rods wedged in two places between the blocks and then followed this with rods from the outside of the blocks into the case walls. The rods were just nails sharpened at both ends.
Logged
Serafini R2D2 GC, Serafini GC accs 18 bass

tirpous

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1403
Re: 'Wah-wah' tremolo issues
« Reply #68 on: March 15, 2021, 10:08:41 PM »

Quote
The rods were just nails sharpened at both ends.


With Clubs usually in C/F or Bb/Eb I would have expected the nails to be flattened !  ;D

(sorry, couldn't help it)
Logged

mselic

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1683
Re: 'Wah-wah' tremolo issues
« Reply #69 on: March 16, 2021, 12:09:55 PM »

Theo - I’ll have a look again to see if I can find any signs of internal cracks in the plywood.

Tirpous - I think those crack-lines you see are superficial (on the surface of the first layer of ply only).

Scott - here’s a video:

https://youtu.be/4bl5vSCfO74
Logged
C#/D player

Kon

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 165
Re: 'Wah-wah' tremolo issues
« Reply #70 on: March 16, 2021, 05:22:24 PM »

Have you tried taking the grille and/or keyboard cover off? Also, have you tried playing the box with just one of the blocks in? Both had a substantial effect on the sound of my Erica. (Also playing the blocks in another box if possible?)
Logged
GC Erica

mselic

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1683
Re: 'Wah-wah' tremolo issues
« Reply #71 on: March 16, 2021, 08:40:35 PM »

Have you tried taking the grille and/or keyboard cover off? Also, have you tried playing the box with just one of the blocks in? Both had a substantial effect on the sound of my Erica. (Also playing the blocks in another box if possible?)

Yes, I’ve done both, and the problem persists in each case.
Logged
C#/D player

Kon

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 165
Re: 'Wah-wah' tremolo issues
« Reply #72 on: March 16, 2021, 08:59:06 PM »

Ah fair enough. Sorry to be persistent!
Logged
GC Erica

Mark Anderson

  • Member
  • *
  • Offline Offline
  • Posts: 36
Re: 'Wah-wah' tremolo issues
« Reply #73 on: March 16, 2021, 11:20:54 PM »

Quote
The rods were just nails sharpened at both ends.


With Clubs usually in C/F or Bb/Eb I would have expected the nails to be flattened !  ;D

That's why the nail were double sharps.   (:)
Logged

Stiamh

  • Old grey C#/D pest
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3611
    • Packie Manus Byrne
Re: 'Wah-wah' tremolo issues
« Reply #74 on: March 17, 2021, 12:40:38 AM »

 ;D Ooh we are a sharp-witted bunch aren't we?

Have nothing constructive to add, Matt, at least as far as solving the problem goes, but I have to say that is a lovely sounding instrument.

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: 'Wah-wah' tremolo issues
« Reply #75 on: March 23, 2021, 09:52:40 AM »

I have solved a wah-wah tremolo problem which I was encountering on a Castagnari D/G Tommy.

The Tommy is three voice LMM, with the G-row M and M+ reeds on one reed block, the L voice G and D reeds on the centre reed block, and the D-row M and M+ reeds on the third reed block. The reed blocks are secured at one end by a screw clamp and at the other end by a small aluminium plate which screws down on to the stepped end of the reed block.

The three reed blocks are connected together at the approximate mid-points by a 1mm brass strip brace secured by screws into the middle of the reed blocks. The brass strip takes the form of an inverted square 'U' shape with extended 'serifs' to reach over the outer reed blocks. See attached sketch - the gaps represent the screw holes.

After some retuning work, I had a persistent wah-wah tremolo on one of the G-row M and M+ reeds, corresponding to the reeds exactly beneath where the brace was fitted. Adjusting the compression of the clamps at either end of the reed blocks did not remove the wah-wah. Removing the reed block brace set up other undesireable wah-wah effects elsewhere. Eventually I noticed that slightly slackening the brace screw nearest the problem reed did improve the wah-wah effect.

I then looked at the profile of the brace. As I've tried to show in the sketch, the 'serifs' and the centre of the brace were angled and bowed slightly, and without screws, these sections stood proud of the tops of the reed blocks, and only made flush contact when the screws wrere fully tightened down. I then gently bent the brace centre and serifs so that it sat exactly flat on the reed blocks with no gaps which needed to be forcibly closed by tightening the screws. Bingo! Wah-wah tremolo disappeared!  :Ph (:) Hooray!

I think the take-away lesson from this particular case is that the reed block brace is important and needed, but there should be no vertical forces set up by a mis-fitting of the brace strip. It is horizontal rigidity which is required, not additional differential vertical forces. 

I am not sure whether this is applicable in every case, and perhaps not in Matt's original problem, but who knows? It's certainly worth checking that the reed block brace shape enables it to sit perfectly in place with no gaps, before securing the screws.
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

mselic

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1683
Re: 'Wah-wah' tremolo issues
« Reply #76 on: March 23, 2021, 01:39:47 PM »

Thanks for sharing that with us, Steve - much appreciated :) I’ll certainly have a closer look at mine later this evening.
Logged
C#/D player

Graham W

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 277
Re: 'Wah-wah' tremolo issues
« Reply #77 on: March 25, 2021, 09:52:33 AM »

Yes, thank you for posting that.
It chivvied me to have another look at an instrument with a persistent very minor ‘oddness’ to b4/c5, which I had been able to vary and reduce hugely but not totally eliminate.
The brace as it turned out sat perfectly, but I did go on to double check everything else around the offending Reed - which was all fine, and with perfect sound and tremolo when tested out of the instrument.
Eventually I rechecked the base of the Reed block for flatness. It looked fine, and a casual visual check with a ruler across it looked good - but when checked with an engineers square  and on a known flat surface there was a chamfer of about 4mm wide running about 3” along the side one one end, but only  about .003” at deepest at the outside edge.
I corrected that, reassembled it - and hey presto, perfect timbre and tremolo ;)

It’s a block I made, and I would have finished the base on my big oscillating belt sander so I can only assume I was less than sufficiently careful, probably when lifting it off the belt, and that even such a minimal resulting variation was enough to affect the horizontal rigidity when all assembled. And that the gasket material can’t be counted on to deal with even the most minor variations!

Graham

Logged

Winston Smith

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4066
  • AKA Edward Jennings
    • "Our Luxor B&B" Luxor life, slice by slice.
Re: 'Wah-wah' tremolo issues
« Reply #78 on: March 25, 2021, 10:27:02 AM »

Graham, I'm really surprised to read that, 3 thou isn't very much at all.

When I converted one of my Liliputs to D/G, I was quite worried that I could easily slide an 8 thou feeler under the middle two or three inch section of one of the blocks. But it proved to have no audible effect on the instrument in playing.
Logged
At last, broken and resigned to accept conformity.
Oh, how I LOVE Big Brother!

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: 'Wah-wah' tremolo issues
« Reply #79 on: March 25, 2021, 10:49:33 AM »

I've occasionally found that a very slight deviation from flatness can cause problems, but those I have measured have been more than .003".

Air can leak under a block that's not flat, but it can also result in distortion of the block which can also distort reed plates and lead to a reed tongue no longer being central.  In the extreme this can silence a reed, but it can also cause the reed to loose volume or go off pitch which is a plausible cause for 'Wah-wah' tremolo.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning
Pages: 1 2 3 [4] 5   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal