Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: 1 2 3 4 [5]   Go Down

Author Topic: 'Wah-wah' tremolo issues  (Read 9111 times)

0 Members and 1 Guest are viewing this topic.

Tone Dumb Greg

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4955
    • Dartmoor Border Morris
Re: 'Wah-wah' tremolo issues
« Reply #80 on: March 25, 2021, 10:52:07 AM »

I am surprised that the gasket was ineffective in sealing a gap of much less than 0.1mm (about 0.075mm, I think). Was there something in the design of the seal, or the way it seated, that prevented it filling the "gap".
Logged
Greg Smith
DG/GC Pokerwork, DG 2.4 Saltarelle, pre-war CF Hohner, Hohner 1040 Vienna style, old  BbEb Hohner that needs a lot of work.

ACCORDION, n. An instrument in harmony with the sentiments of an assassin. Ambrose Bierce

Graham W

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 277
Re: 'Wah-wah' tremolo issues
« Reply #81 on: March 25, 2021, 02:40:36 PM »

I wish I'd measured everything in detail and noted it down now!
I agree it sounds very strange and unlikely . . .

 I am also too picky about things for my own good ;-(  I suspect most people wouldn't have noticed anything amiss with this one - the instrument had been played the previous day by a friend who is a better musician than me and he certainly didn't. 
It was a very subtle 'not quite rightness', and Steve's explanation of the significant effect of what must have been minimal upward tension from the reed block brace in his example led me to look at it again. Firstly at the brace, but then for anything else more subtle than I might previously have considered.

I'm certain it wasn't an air leak issue, I am happy that the Gasket material - Olovisc in this case - is more than capable of dealing with a gap larger than that.

I'm sure it's the fact that the gap was a chamfer at the edge of the block that was the issue
With the reed block placed on a reference surface  (The substantial cast iron bed of a milling machine) it was possible to feel a very tiny amount of lateral rock at that end of the block.
The blocks are shimmed into position in the instrument so have no sideways movement at all, but with Steve's remark about lateral rigidity in mind I think that while the Olovisc gasket will seal bigger gaps airtight it doesn't provide rigid support,  thus leaving open the possibility of miniscule rocking movement/resonance at that end of the block.

I suppose there might be some other factor while taking the  blocks in and out again, but I can't for the life of me think what, and removing the tiny amount of rock that even such a minimal edge gap allowed does seem to have been a thorough cure.

It's all fascinating and occasionally very frustrating! 
I'll post some pics of the (no longer offending) instrument in a new thread.

I suppose ultimately the thing is to glue the reed blocks to the fondo and make one combined rigid structure,  but. . . . ;)

Graham


Logged

Winston Smith

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4066
  • AKA Edward Jennings
    • "Our Luxor B&B" Luxor life, slice by slice.
Re: 'Wah-wah' tremolo issues
« Reply #82 on: March 25, 2021, 05:42:44 PM »

"I suppose ultimately the thing is to glue the reed blocks to the fondo and make one combined rigid structure,"

Or; get both surfaces flat and do away with the need for a gasket altogether. Difficult with wood, I suppose, but probably not impossible.
Logged
At last, broken and resigned to accept conformity.
Oh, how I LOVE Big Brother!

mselic

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1683
Re: 'Wah-wah' tremolo issues
« Reply #83 on: May 24, 2021, 11:44:35 PM »

Good news to report - A BREAKTHROUGH - I finally managed to solve the problem!  The solution ended up being so simple that I'm surprised it hadn't come to me sooner, given all the work I'd thrown into it.  All my efforts to address rigidity/structural issues had centered around bracing the blocks to each other, as well as ensuring that each block was well-fastened to the frame at each end.  I had ended up with 4 braces across the blocks (4!) to reduce the issue, but I could never get it to fully go away.  Adjusting the amount of tension at each of the fastening points between the blocks and the frame also helped but no variation of adjustment there was successful in eliminating the problem.  This morning, I finally had an epiphany:

I wedged a rod as a *lateral* brace between each block and the frame and PRESTO!  Problem gone!  The "wah-wah" tremolo effect, which had plagued this box from the day I got it, is no more (knock on wood!).  I've attached a photo of the fix.  At this point, I could probably remove a few of the extra braces between the blocks themselves, but I was so relieved to have found a solution that I left well enough alone for now!  I hope this helps others in future!

Logged
C#/D player

mselic

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1683
Re: 'Wah-wah' tremolo issues
« Reply #84 on: May 24, 2021, 11:48:23 PM »

Quick clip of the box sounding as it should (with flubs):

https://youtu.be/0et0jDeSA08
Logged
C#/D player

Stiamh

  • Old grey C#/D pest
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3611
    • Packie Manus Byrne
Re: 'Wah-wah' tremolo issues
« Reply #85 on: May 25, 2021, 02:37:21 AM »

Sounds brilliant! Very glad you found a fix.

Graham W

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 277
Re: 'Wah-wah' tremolo issues
« Reply #86 on: May 25, 2021, 01:27:24 PM »

Excellent ;)
Just goes to confirm that every case can be ever so slightly different, and there is always somehting new to learn.  . . . . .
Logged

Kimric Smythe

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 712
    • Smythe's Accordion Center
Re: 'Wah-wah' tremolo issues
« Reply #87 on: May 25, 2021, 06:34:58 PM »

It would seem that the mass of the two blocks was also a resonant frequency, or that the two blocks were very close in mass so they did not damp each other out.

If you are not tired of messing with this you could test this by adding mass to one of the blocks like a 1/4 oz of metal like a couple of brass nuts. and removing the rod you added.

Logged
Smythe's Accordion Center
Pinole, California
Sales and repairs since 1997

mselic

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1683
Re: 'Wah-wah' tremolo issues
« Reply #88 on: May 26, 2021, 12:52:29 AM »

It would seem that the mass of the two blocks was also a resonant frequency, or that the two blocks were very close in mass so they did not damp each other out.

If you are not tired of messing with this you could test this by adding mass to one of the blocks like a 1/4 oz of metal like a couple of brass nuts. and removing the rod you added.

I had already tried adding weights to the blocks earlier but it hadn’t made any difference.
Logged
C#/D player

pgroff

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1827
Re: 'Wah-wah' tremolo issues
« Reply #89 on: May 26, 2021, 02:12:43 PM »

Actually, the fact that this worked suggests to me one of the causes that people suggested earlier.

I think the surface of the reedblock sole(s) is/are not perfectly mated to the soundboard. Either the reedblocks and/or the soundboard is not totally level, when they are clamped down just by the ends or even with the cross-linkages. This could be in a lateral dimension (across the width of the reedblock) where it's very hard to measure flatness, along the length, or even subtlely in a diagonal dimension.

Sometimes this is due to uneven clamping at the ends, and can be fixed there, sometimes can be fixed by planing the bottom of the reedblocks. Sometimes those linkages across the tops make things worse by pushing or pulling one or both blocks up off the soundboard in one or more places.

What you have now really rigidly locks both blocks in place relative to the casework and you find it's fixed the problem. But the fact that this is not needed in most accordions is evidence to me that there are other ways to avoid that problem. Many great old accordions don't even need the linkages across the tops of the blocks if the surfaces are well-mated and the end clamping is just right. I've often seen Aldo Mencacini planing the soles of reedblocks very carefully in just the right place to solve these problems, or tweaking the details where the reedblock is secured at both ends.

It's great if you are happy now but maybe some day we can take a look at this together and see if there could be another workable solution.
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: 'Wah-wah' tremolo issues
« Reply #90 on: May 26, 2021, 02:49:07 PM »

Paul,  that accords with my experience too.  And another related area that can affect the fit of the reed block is when the fond is not perfectly flat.  This is common in old Hohners, and I’ve seen it in Italian boxes too where the fondo is plywood. 
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

pgroff

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1827
Re: 'Wah-wah' tremolo issues
« Reply #91 on: May 26, 2021, 05:54:28 PM »

Paul,  that accords with my experience too.  And another related area that can affect the fit of the reed block is when the fond is not perfectly flat.  This is common in old Hohners, and I’ve seen it in Italian boxes too where the fondo is plywood.

Exactly, either or both:  the reedblocks and/or the soundboard (fondo) can be out of plane. And this non-flatness of one or both may only develop when the reedblocks are clamped. And it may sometimes only develop at times of high or low humidity, due to dimensional changes in reedblocks, soundboard, and/or clamping fixtures at each end.

Sometimes you have to profile the reedblock to fit a soundboard that is not flat, if the problem can't be solved any other way.

PG
Logged

pgroff

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1827
Re: 'Wah-wah' tremolo issues
« Reply #92 on: May 26, 2021, 06:06:19 PM »

Interesting though that mselic originally reported he could banish the problem by changing reeds. Maybe some reeds are just more sensitive than others to these problems.
Logged

Tone Dumb Greg

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4955
    • Dartmoor Border Morris
Re: 'Wah-wah' tremolo issues
« Reply #93 on: May 26, 2021, 06:19:50 PM »

Interesting though that mselic originally reported he could banish the problem by changing reeds. Maybe some reeds are just more sensitive than others to these problems.
Reeds? I thought he put valves.
Logged
Greg Smith
DG/GC Pokerwork, DG 2.4 Saltarelle, pre-war CF Hohner, Hohner 1040 Vienna style, old  BbEb Hohner that needs a lot of work.

ACCORDION, n. An instrument in harmony with the sentiments of an assassin. Ambrose Bierce

pgroff

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1827
Re: 'Wah-wah' tremolo issues
« Reply #94 on: May 26, 2021, 06:30:59 PM »

Interesting though that mselic originally reported he could banish the problem by changing reeds. Maybe some reeds are just more sensitive than others to these problems.
Reeds? I thought he put valves.



At one point I replaced both reeds of a particular note with spare Hohner reeds.  This actually fixed the problem with that note, however the tone of the Hohner reeds really stuck out compared to the others.

The tuning of the reeds also didn't make a difference.


This evidence distracted me for a while into assuming it was a reed problem.
« Last Edit: May 26, 2021, 06:32:47 PM by pgroff »
Logged

mselic

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1683
Re: 'Wah-wah' tremolo issues
« Reply #95 on: May 27, 2021, 03:39:07 AM »

Actually, the fact that this worked suggests to me one of the causes that people suggested earlier.

I think the surface of the reedblock sole(s) is/are not perfectly mated to the soundboard. Either the reedblocks and/or the soundboard is not totally level, when they are clamped down just by the ends or even with the cross-linkages. This could be in a lateral dimension (across the width of the reedblock) where it's very hard to measure flatness, along the length, or even subtlely in a diagonal dimension.

Sometimes this is due to uneven clamping at the ends, and can be fixed there, sometimes can be fixed by planing the bottom of the reedblocks. Sometimes those linkages across the tops make things worse by pushing or pulling one or both blocks up off the soundboard in one or more places.

What you have now really rigidly locks both blocks in place relative to the casework and you find it's fixed the problem. But the fact that this is not needed in most accordions is evidence to me that there are other ways to avoid that problem. Many great old accordions don't even need the linkages across the tops of the blocks if the surfaces are well-mated and the end clamping is just right. I've often seen Aldo Mencacini planing the soles of reedblocks very carefully in just the right place to solve these problems, or tweaking the details where the reedblock is secured at both ends.

It's great if you are happy now but maybe some day we can take a look at this together and see if there could be another workable solution.

I understand what you're saying Paul (and Theo), but I had checked the levelness of the bottom of the blocks with several different straight edges, including a framing square, and they were perfectly flush.  I did the same with the soundboard (as best I could) with a smaller straight edge, and *as far as I could tell* there were no gaps, dips, etc.  Mind you, there is also the gasket glued to the soundboard.  My point is, if using a straight edge along the bottom of the blocks as well as the soundboard shows them to be flat, attempting to sand anything down further wouldn't make any sense, and could possibly make things even worse.

I don't disagree that there is something structural going on with it, but given all the investigative work I've done with it to date, I'm not sure where else I'd go looking for a solution, unless I'd want to do something drastic like build new blocks for it.  Yes, some accordions are built such that they don't even need a bar across the blocks.  Many do, and for whatever reason this one seems to need additional stabilizing by bracing the blocks against the frame.  I could mess about with it for ages and possibly not get anywhere (like I did with it earlier!), or I could just accept that it works perfectly fine now with braces in the box and not go looking further for trouble...
« Last Edit: May 27, 2021, 03:42:10 AM by mselic »
Logged
C#/D player

mselic

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1683
Re: 'Wah-wah' tremolo issues
« Reply #96 on: May 27, 2021, 03:54:31 AM »

Interesting though that mselic originally reported he could banish the problem by changing reeds. Maybe some reeds are just more sensitive than others to these problems.
Reeds? I thought he put valves.



At one point I replaced both reeds of a particular note with spare Hohner reeds.  This actually fixed the problem with that note, however the tone of the Hohner reeds really stuck out compared to the others.

The tuning of the reeds also didn't make a difference.


This evidence distracted me for a while into assuming it was a reed problem.

Yes, I did change a few reeds at one point to see if it made a difference, but the reeds themselves were not the issue. They were, however, another variable in the equation.  I'd like to keep the original reeds and blocks, so I have no intention of swapping them out.
Logged
C#/D player

Rob2Hook

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2278
  • Castagnaris, Hohners & Baffetti
Re: 'Wah-wah' tremolo issues
« Reply #97 on: June 06, 2021, 12:13:05 PM »

I'd like to keep the original reeds and blocks, so I have no intention of swapping them out.

And why would you when it's now sounding so good?  You seem to have investigated every possible conventional solution, to no avail.  Having found a solution, it's a case of "If it ain't broke..."

Rob.
Logged
Pages: 1 2 3 4 [5]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal