Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1] 2   Go Down

Author Topic: Unusual grill for a Hohner presswood 1 row  (Read 2035 times)

0 Members and 1 Guest are viewing this topic.

komat

  • Eastcoaster
  • Regular debater
  • ***
  • Offline Offline
  • Posts: 228
Unusual grill for a Hohner presswood 1 row
« on: March 20, 2021, 04:54:33 PM »

Anyone ever see a Hohner Presseood with this type of grill?

Logged
Too many accordions, help!

Anahata

  • This mind intentionally left blank
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 6767
  • Oakwood D/G, C/F Club, 1-rows in C,D,G
    • Treewind Music
Re: Unusual grill for a Hohner presswood 1 row
« Reply #1 on: March 20, 2021, 05:43:19 PM »

That looks more like a bass end plate.
Alternatively it could be a home made replacement part.
Logged
Слава Україні !
Music recording and web hosting: www.treewind.co.uk
Mary Humphreys and Anahata: www.maryanahata.co.uk
Ceilidh band: www.barleycoteband.co.uk

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Unusual grill for a Hohner presswood 1 row
« Reply #2 on: March 20, 2021, 05:51:23 PM »

II agree it looks like a bass player that’s been adapted.  The pattern of holes is typical of Koch or Hohner bass plates.  If it was made as a treble grill I would have expected the decorative pattern to include the local toon of the two metal plates, ate the hole where the lift out screw has been fitted.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

pgroff

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1827
Re: Unusual grill for a Hohner presswood 1 row
« Reply #3 on: March 20, 2021, 06:28:21 PM »

Yes, agree with Anahata and Theo, it's a re-worked bass grille plate.

Since I'm not entirely sure whether Theo has seen the entire pattern, or only the pattern of holes, on a bass grille - I can confirm that I have seen this exact bird pattern on the bass grilles of some presswood 2 row boxes (can't remember whether labeled Hohner, Koch, or Concertone). In one case, the box had termite damage but I saved the bass grille and Barbara has it as a shelf decoration. Will try to take a pic next time I visit her office.

Clever idea.

PG
« Last Edit: March 20, 2021, 06:30:26 PM by pgroff »
Logged

chris hall

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 245
Re: Unusual grill for a Hohner presswood 1 row
« Reply #4 on: March 20, 2021, 08:04:01 PM »

interesting! If it was originally a bass end grille what happened to hole for air button? Either way would it allow enough music to flow through such a grill. I have an old 2 row im restoring with a very similar but clearly homemade grille. Would a nicer replacement grill made out of 3mm birch ply work just as well as a metal grille?
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Unusual grill for a Hohner presswood 1 row
« Reply #5 on: March 20, 2021, 08:18:43 PM »

The bass plate is typically an inch or so wider than the treble grill so one or two edges would have to be trimmed so the air button hole would not be included.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

playandteach

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3526
  • Currently a music teacher in a high school.
Re: Unusual grill for a Hohner presswood 1 row
« Reply #6 on: March 20, 2021, 09:31:04 PM »

interesting! If it was originally a bass end grille what happened to hole for air button? Either way would it allow enough music to flow through such a grill. I have an old 2 row im restoring with a very similar but clearly homemade grille. Would a nicer replacement grill made out of 3mm birch ply work just as well as a metal grille?
Many top instruments have plywood grills. Lots of filigree work though. See Marc Serafini's home page: https://www.diatoz.fr/
Logged
Serafini R2D2 GC, Serafini GC accs 18 bass

Tone Dumb Greg

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4955
    • Dartmoor Border Morris
Re: Unusual grill for a Hohner presswood 1 row
« Reply #7 on: March 20, 2021, 10:12:21 PM »

... I have an old 2 row im restoring with a very similar but clearly homemade grille. Would a nicer replacement grill made out of 3mm birch ply work just as well as a metal grille?

Speaking impartially...3mm ply? Yes, but maybe a solid sheet would be even better. Either way, if you're not already, you'll be a dab hand with the fret saw by the time you finish and it will look far better than a piece of ply with a few holes knocked into it.
Logged
Greg Smith
DG/GC Pokerwork, DG 2.4 Saltarelle, pre-war CF Hohner, Hohner 1040 Vienna style, old  BbEb Hohner that needs a lot of work.

ACCORDION, n. An instrument in harmony with the sentiments of an assassin. Ambrose Bierce

invadm

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 613
Re: Unusual grill for a Hohner presswood 1 row
« Reply #8 on: March 20, 2021, 10:49:07 PM »

I think it is original, posibly very early one, looking at the hook slots with metal facing plate-where hooks goes-  and missing hook/eylet to lift it up at the front (hole is still here ) sagest it was fitted as grill originaly..unsual for sure..may be they didnt have time to do proper grill and just adapted bass end as grill? 
Logged

Mark Anderson

  • Member
  • *
  • Offline Offline
  • Posts: 36
Re: Unusual grill for a Hohner presswood 1 row
« Reply #9 on: March 21, 2021, 12:13:41 AM »

Aren't wooden grilles almost invariably made of laminate? A thin sheet of solid wood will easily crack and split into so many splinters after (or while!) one cuts one's lovely fretwork design into it.
Logged

hickory-wind

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 627
  • Lives in NY USA near the Erie Canal
    • Bellingers' Button Boxes
Re: Unusual grill for a Hohner presswood 1 row
« Reply #10 on: March 21, 2021, 04:21:45 AM »

No air button hole. No screw holes. It would have needed to be cut down on two sides to remove them. The embossed pattern does carefully stay away from the short sides while on the long sides the pattern is cut through. Another vote for a repurposed back. A picture of the underside might reveal more.
Logged
too many boxes...please buy one, or two, or

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Unusual grill for a Hohner presswood 1 row
« Reply #11 on: March 21, 2021, 09:07:14 AM »

Aren't wooden grilles almost invariably made of laminate? A thin sheet of solid wood will easily crack and split into so many splinters after (or while!) one cuts one's lovely fretwork design into it.

You would think so, but wooden grills on early Hohners were made of solid timber and are prone to cracking.  Base plates were also made of solid timber in the early days. I’ve repaired them many times, and cut a few new ones out of ply.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Nigel.H

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 586
Re: Unusual grill for a Hohner presswood 1 row
« Reply #12 on: March 21, 2021, 11:22:15 AM »

I have replaced a grille for a friend on a Serenellini 213K, I used 4mm ply with a Beech veneer finish as per the original.  I routed the line inside the marquetry with a lip then fitted the insert onto it.  A bit of a fiddle but looked decent enough when done.

I see the Dony is a Ply with Cherry veneer, it too is 4mm.  I think 3mm would be a bit thin ?

If the 4mm + veneer is a little thick to 'drop int' to the recess, it can be routed along the 'inside' / wrong edge to fit.  I had to make a new bass 'board for the same Box and used solid wood sheet for that, but I only needed to drill the sound holes not cut fret work.  Fret work is a pain.......if I had to do many I would see about sourcing a laser cutter or laser cutting service.......
Logged

Graham Spencer

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3548
  • MAD as a wet Hohner........
Re: Unusual grill for a Hohner presswood 1 row
« Reply #13 on: March 21, 2021, 11:41:48 AM »

I made a second grille for my Pastourelle with a Microvox permanently attached - swapping the grilles over is quick and simple, and ensures a reliable mount for the mic. I used 4mm veneered ply, but did it the hard way, with a fretsaw.....
Logged
Among others, Saltarelle Pastourelle II D/G; Hohner 4-stop 1-rows in C & G; assorted Hohners; 3-voice German (?) G/C of uncertain parentage; lovely little Hlavacek 1-row Heligonka; Bâ™­/Eâ™­ Koch. Newly acquired G/C Hohner Viktoria. Also Fender Jazz bass, Telecaster, Stratocaster, Epiphone Sheraton, Charvel-Jackson 00-style acoustic guitar, Danelectro 12-string and other stuff..........

Squeezing in the Cyprus sunshine

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Unusual grill for a Hohner presswood 1 row
« Reply #14 on: March 21, 2021, 12:56:58 PM »

This is a copy of the original Hohner grill fitted to an early Club I restored earlier this year:



The original was solid timber, the replacement is ply colour matched to the priginal.

Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Winston Smith

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4066
  • AKA Edward Jennings
    • "Our Luxor B&B" Luxor life, slice by slice.
Re: Unusual grill for a Hohner presswood 1 row
« Reply #15 on: March 21, 2021, 02:06:23 PM »

Was that by hand, Theo, or with your scroll saw? (Says he, eager to get to grips with his new toy!!)
Logged
At last, broken and resigned to accept conformity.
Oh, how I LOVE Big Brother!

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Unusual grill for a Hohner presswood 1 row
« Reply #16 on: March 21, 2021, 02:35:27 PM »

Scroll saw, and I used two pieces of ply fastened together so I have a spare for the next one.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Peadar

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2039
Re: Unusual grill for a Hohner presswood 1 row
« Reply #17 on: March 21, 2021, 03:59:56 PM »

This is a copy of the original Hohner grill fitted to an early Club I restored earlier this year:



The original was solid timber, the replacement is ply colour matched to the priginal.

That is the grille pattern I was wanting to replicate for my Hohner 490 (unstarted project box).
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Unusual grill for a Hohner presswood 1 row
« Reply #18 on: March 21, 2021, 04:51:37 PM »


That is the grille pattern I was wanting to replicate for my Hohner 490 (unstarted project box).

I can send you a copy of my drawing if that would help
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

hickory-wind

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 627
  • Lives in NY USA near the Erie Canal
    • Bellingers' Button Boxes
Re: Unusual grill for a Hohner presswood 1 row
« Reply #19 on: March 21, 2021, 05:54:36 PM »

Older Koch in GC. Notice pattern neatly fits within edges.
Logged
too many boxes...please buy one, or two, or
Pages: [1] 2   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal