Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1] 2   Go Down

Author Topic: Painting Bellow Frames and other parts.  (Read 1830 times)

0 Members and 1 Guest are viewing this topic.

Vallenato831

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 201
Painting Bellow Frames and other parts.
« on: March 24, 2021, 05:31:52 PM »

I have a few Hohner boxes that need some freshening up.  I'd like to repaint the black parts.  Such as the bellow frames, black part of the keyboard and the bassboard cover.   I've attached a few photos showing the areas. 

What type of paint do I use, one that wont leave it sticky to the touch? 
« Last Edit: March 24, 2021, 08:51:30 PM by Vallenato831 »
Logged
Corona III x8

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Paiting Bellow Frames and other parts.
« Reply #1 on: March 24, 2021, 05:40:48 PM »

I’ve had good results with car spray paint.   Check first that the old paint doesn’t react badly.  If the old paint  is deeply chipped or scratched you will need to remove all the old paint if you want a decent finish.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: Paiting Bellow Frames and other parts.
« Reply #2 on: March 24, 2021, 05:42:00 PM »

I’ve had good results with car spray paint.   Check first that the old paint doesn’t react badly.  If the old paint  is deeply chipped or scratched you will need to remove all the old paint if you want a decent finish.
I was about to say this very thing but Theo beat me to it

Vallenato831

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 201
Re: Paiting Bellow Frames and other parts.
« Reply #3 on: March 24, 2021, 05:48:25 PM »

I’ve had good results with car spray paint.   Check first that the old paint doesn’t react badly.  If the old paint  is deeply chipped or scratched you will need to remove all the old paint if you want a decent finish.

I would have never thought that would work!  I was thinking of some kind of roll on paint.   With spray I have to be extremely careful with overspray.  I guess it's all in the prep. 
Logged
Corona III x8

Helena Handcart

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2452
  • Saltarelle Nell
Re: Paiting Bellow Frames and other parts.
« Reply #4 on: March 24, 2021, 05:50:04 PM »

Following advice from Theo I used car spray paint to freshen up some Liliput keyboards, just a quick sand and quick spray and they looked lovely and the finish was not at all out of place.
Logged
Saltarelle Le Romané  | Saltarelle Nuage | Oakwood | various elderly Hohners

Andy Next Tune

  • aka Andy Wooles
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1127
  • Melodeon with Accidentals? Make a PI Claim!!!
    • www.shavethedonkey.co.uk
Re: Paiting Bellow Frames and other parts.
« Reply #5 on: March 24, 2021, 05:56:06 PM »

Yep, I've also had good results with car spray cans. However you do need to disassemble then clean and prep everything thoroughly before spraying.
Logged
Andy, from the now ex-County Palatine of Cheshire

Caring for a European community of melodeons from France, Italy, Germany, Wales and Suffolk!

rees

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5055
  • Windjammer
    • Wesson Accordions
Re: Paiting Bellow Frames and other parts.
« Reply #6 on: March 24, 2021, 05:57:04 PM »

Overspray can be avoided by using masking tape.
Logged
Rees Wesson (accordion builder and mechanic)
Gungrog, Welshpool, Wales, UK
www.melodeons.com

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: Paiting Bellow Frames and other parts.
« Reply #7 on: March 24, 2021, 05:59:41 PM »

An alternative for the bellows frames is to use Humbrol model makers enamel which can be brushed on.


Gonk

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 507
  • (Mudlark Music)
    • Mudlark Music
Re: Paiting Bellow Frames and other parts.
« Reply #8 on: March 24, 2021, 06:16:53 PM »

Might go without saying, but I like the finish that results from drying and sanding between the first coats, medium then fine, then very fine steel wool.
Logged
Mudlark Music - restoration, repairs, lessons, and sales.  (USA)  http://mudlark-music.com

Chris Marriott

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1048
Re: Paiting Bellow Frames and other parts.
« Reply #9 on: March 24, 2021, 06:46:11 PM »

For my, ahem, “colourful” Pokerwork I used artist’s acrylic paint and finished it with several coats of satin varnish.
Logged
Chris

Castagnari Mory, English Concertina and Piano Accordion.

Graham Spencer

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3548
  • MAD as a wet Hohner........
Re: Paiting Bellow Frames and other parts.
« Reply #10 on: March 24, 2021, 07:22:08 PM »

Yep, I've also had good results with car spray cans. However you do need to disassemble then clean and prep everything thoroughly before spraying.

Same here - I keep a can of "matt" (I find it doesn't dry dead matt, but has just a tiny hint of satin finish that I really like) black car spray in the workshop at all times, and usually have a small selection of other useful colours knocking about.  Thorough prep is essential for good results.
Logged
Among others, Saltarelle Pastourelle II D/G; Hohner 4-stop 1-rows in C & G; assorted Hohners; 3-voice German (?) G/C of uncertain parentage; lovely little Hlavacek 1-row Heligonka; Bâ™­/Eâ™­ Koch. Newly acquired G/C Hohner Viktoria. Also Fender Jazz bass, Telecaster, Stratocaster, Epiphone Sheraton, Charvel-Jackson 00-style acoustic guitar, Danelectro 12-string and other stuff..........

Squeezing in the Cyprus sunshine

Vallenato831

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 201
Re: Paiting Bellow Frames and other parts.
« Reply #11 on: March 24, 2021, 07:28:04 PM »

Overspray can be avoided by using masking tape.

What worries me is the bellow frames, dont want to risk damaging the bellows.  For the keyboard, should be straight forward.  I'm going to find some of that models brush on paint that Lester recommends. 
Logged
Corona III x8

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: Paiting Bellow Frames and other parts.
« Reply #12 on: March 24, 2021, 07:31:58 PM »

An alternative for the bellows frames is to use Humbrol model makers enamel which can be brushed on.

Yes - I've used that for bellows frames. It's good and hard-wearing.
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

Chris Marriott

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1048
Re: Paiting Bellow Frames and other parts.
« Reply #13 on: March 24, 2021, 07:43:04 PM »

An alternative for the bellows frames is to use Humbrol model makers enamel which can be brushed on.

Yes - I've used that for bellows frames. It's good and hard-wearing.

Yes, my acrylic paint isn’t very tough. Hence the varnish to protect it.
Logged
Chris

Castagnari Mory, English Concertina and Piano Accordion.

diatonix

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 622
Re: Painting Bellow Frames and other parts.
« Reply #14 on: March 24, 2021, 09:30:59 PM »

I too use car spray paint. In the case of bellows frames I spray a generous amount on to a piece of wood or card board and then use a small paint brush. Wear a gas mask, the stuff is nasty.
« Last Edit: March 24, 2021, 09:32:34 PM by diatonix »
Logged

Stiamh

  • Old grey C#/D pest
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3611
    • Packie Manus Byrne
Re: Painting Bellow Frames and other parts.
« Reply #15 on: March 24, 2021, 09:50:14 PM »

For my, ahem, “colourful” Pokerwork I used artist’s acrylic paint and finished it with several coats of satin varnish.

Love it!

Chris Marriott

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1048
Re: Painting Bellow Frames and other parts.
« Reply #16 on: March 24, 2021, 09:56:30 PM »

For my, ahem, “colourful” Pokerwork I used artist’s acrylic paint and finished it with several coats of satin varnish.

Love it!

Completely unsellable now, probably 😁
Logged
Chris

Castagnari Mory, English Concertina and Piano Accordion.

Grumpy

  • Grumpy
  • Regular debater
  • ***
  • Offline Offline
  • Posts: 134
Re: Painting Bellow Frames and other parts.
« Reply #17 on: March 24, 2021, 10:56:01 PM »

Smooth gloss black Hammerite is a perfect match to Liliput, dries quickly to a super hard finish and has no stickyness even in summer sun. A little expensive but tin lasts along time.
Logged
Chris D, Surrey, UK
Getting old but still learning. Pokerwork G/D, Saltarelle L'Elfique G/D, Castagnari Lilly G/D and Hohner Liliput Declubed G/D + English concertinas, mandolins, recorders, tin whistles and other items unknown to household managment

Vallenato831

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 201
Re: Paiting Bellow Frames and other parts.
« Reply #18 on: March 24, 2021, 11:07:32 PM »

An alternative for the bellows frames is to use Humbrol model makers enamel which can be brushed on.

Is this the right stuff?

https://modelmerchants.com/shop/humbrol-21-black-gloss-enamel-paint-14ml-45-oz-aa0237/
Logged
Corona III x8

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: Paiting Bellow Frames and other parts.
« Reply #19 on: March 24, 2021, 11:58:12 PM »

An alternative for the bellows frames is to use Humbrol model makers enamel which can be brushed on.

Is this the right stuff?

https://modelmerchants.com/shop/humbrol-21-black-gloss-enamel-paint-14ml-45-oz-aa0237/

Yes - that's the stuff!
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk
Pages: [1] 2   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal