Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1] 2   Go Down

Author Topic: old hohner club pallet felt thickness  (Read 3231 times)

0 Members and 1 Guest are viewing this topic.

Willem Feltkamp

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 129
  • Tinkering and playing diatonics and CBA
old hohner club pallet felt thickness
« on: March 28, 2021, 09:29:16 AM »

I'd like to de-clack the pallets of an old Hohner club, but I've noticed the pallets open only some 4 or 5 millimetres before the key is stopped (I glued 1 mm of felt under the keys for damping the sound). My padding material is 3,5 or 4 mm thick, whereas it seems there's hardly any felt or leather on the pallets at the moment.
So if I'd use my padding material, the pallet would hardly open at all.
Bending the metal levers doesn't seem like a good idea since it would mean bending a flat metal surface around its wrong axis, which can only result in twisting it.
Would it be worth it to use thinner felt/leather on the pallets, or would they be just as noisy?
Or is bending of the levers doable?
Logged

Rog

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2525
  • Repair and tuning in Hants
Re: old hohner club pallet felt thickness
« Reply #1 on: March 28, 2021, 09:36:29 AM »

I sometimes make a leather/felt sandwich using craft felt...it’s pretty thin (I also use the ready made stuff). However, I reason that if a layer of leather was good enough when it was manufactured, simply replacing the leather would return it to its 'factory' condition ... and avoid the problem of key alignment/height etc.  I suggest trying that first.

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: old hohner club pallet felt thickness
« Reply #2 on: March 28, 2021, 11:36:27 AM »

For most Hohners a  felt/leather sandwich with a total thickness of 2mm/2.5mm works very well.  You can buy it ready made from Charlie Marshall.  The thicker the material you use the more you must bend the levers to compensate.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Gonk

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 507
  • (Mudlark Music)
    • Mudlark Music
Re: old hohner club pallet felt thickness
« Reply #3 on: March 28, 2021, 06:27:02 PM »

It's also a big help to take the pallets off the rods.  When you reattach them, using your preferred method (hot glue etc), even if a slight angle has been introduced to the rod, the new attachment will allow the pallet to sit flat.  I do think bending the rods slightly is fine, if you are careful about controlling the location of the bend with two pairs of pliers or torciferri.
Logged
Mudlark Music - restoration, repairs, lessons, and sales.  (USA)  http://mudlark-music.com

Nigel.H

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 586
Re: old hohner club pallet felt thickness
« Reply #4 on: March 28, 2021, 06:58:30 PM »

LaMaelle sell ready paired felt/leather too......https://www.lamalleauxaccordeons.fr/fr/

To re-fit the pallets to the rods, I use a 10mm punch and cotton discs from what I think are called Tote Bags......they seem to be free ? or least my wife accumulates so many, I hope they are. 

The 10mm discs replicate the originals.....I use a Fish Glue in combination with the cotton 'disc'.  The glue soaks in and holds seriously well and makes for a clean neat job.

Logged

Peadar

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2039
Re: old hohner club pallet felt thickness
« Reply #5 on: March 28, 2021, 07:11:55 PM »

I'm sure it's OK to do this kind of thing on a box where the pallets are held to the pallet arms with hot glue wax but some of the early Hohners had pallets fixed by screws.

I have a box (an Open pallet international) that had been *fettled*  in this way. It was some months before I noticed that to avoid ALL the buttons disappearing down the rabbit holes the *fettler* had partly withdrawn the screws holding the keyboard to the fondo, so the keyboard was half hanging off- held semi rigid by the combined force of all the springs in the action.....which explained where the draught was coming from.

Edit: Wax hot glue
« Last Edit: March 28, 2021, 09:16:12 PM by Peadar »
Logged

Rog

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2525
  • Repair and tuning in Hants
Re: old hohner club pallet felt thickness
« Reply #6 on: March 28, 2021, 07:23:54 PM »

I’ve given up hot glue. It’s not a great adhesive. In fact a lot of pallets are held on with wax.

Gonk

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 507
  • (Mudlark Music)
    • Mudlark Music
Re: old hohner club pallet felt thickness
« Reply #7 on: March 28, 2021, 07:33:14 PM »

I don't want to drift too far from OP's question, but I actually see the ease of removing hot glue as a plus... Roger, has it failed on you prior to intentional removal?
Logged
Mudlark Music - restoration, repairs, lessons, and sales.  (USA)  http://mudlark-music.com

Winston Smith

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4066
  • AKA Edward Jennings
    • "Our Luxor B&B" Luxor life, slice by slice.
Re: old hohner club pallet felt thickness
« Reply #8 on: March 28, 2021, 08:28:30 PM »

I use wax for fixing pallets simply because I always have wax (and a soldering iron) but I don't have a glue gun or sticks of glue.
Logged
At last, broken and resigned to accept conformity.
Oh, how I LOVE Big Brother!

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: old hohner club pallet felt thickness
« Reply #9 on: March 29, 2021, 12:49:06 AM »

I’ve given up hot glue. It’s not a great adhesive....
That's not my experience, Roger. Blobs of hot glue over the pallet arm and pallet groove works very well for me. I've never had a problem with the pallets coming loose. I use the same method as Lester in his video here:
https://youtu.be/g7nVDIXF3qc?t=953
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

Rog

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2525
  • Repair and tuning in Hants
Re: old hohner club pallet felt thickness
« Reply #10 on: March 29, 2021, 08:34:02 AM »

I don't want to drift too far from OP's question, but I actually see the ease of removing hot glue as a plus... Roger, has it failed on you prior to intentional removal?
It has and it’s very annoying. On an instrument I played a lot...one or two pallets started coming loose and on inspection I noticed others. I then checked another instrument..same thing. Perhaps I wasn’t doing it right. I’ve used it on other things too that have failed (a concertina bellows armature..failed...a PA bass machine rack..failed). So I’m not a fan of hot glue. Although in fairness it’s very easy to 'undo'. Others have different experiences, but if I’m sending a box out into the world I can’t afford to have it fail.

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: old hohner club pallet felt thickness
« Reply #11 on: March 29, 2021, 08:58:09 AM »

I don't want to drift too far from OP's question, but I actually see the ease of removing hot glue as a plus... Roger, has it failed on you prior to intentional removal?
It has and it’s very annoying. On an instrument I played a lot...one or two pallets started coming loose and on inspection I noticed others. I then checked another instrument..same thing. Perhaps I wasn’t doing it right. I’ve used it on other things too that have failed (a concertina bellows armature..failed...a PA bass machine rack..failed). So I’m not a fan of hot glue. Although in fairness it’s very easy to 'undo'. Others have different experiences, but if I’m sending a box out into the world I can’t afford to have it fail.

Roger - on the pallets which came loose after fixing with hot melt glue, were they the sort which has a groove to house the pallet arm? My (favourable) experiences with hot melt glue are based on those designs.

Perhaps if you have pallets which don't have a groove, there is more risk of the pallet twisting on the pallet arm and hence coming loose from the glue? If that's the case, I would recommend additionally fixing a disk of linen or leather over the pallet arm.
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: old hohner club pallet felt thickness
« Reply #12 on: March 29, 2021, 09:17:29 AM »

Successful use of hot glue requires the surfaces to be clean. If the pallets were previously fixed with wax the hot glue will net be secure.  With wooden pallets I always sand the top surface to remove old glue and any other contamination.  The glue gun must be thoroughly heated up too.  If it is hot enough the glue becomes more fluid and the blob of glue will  have time to settle into a nice smooth rounded button.  If it still has lumps and bumps on the surface it wasn’t hot enough.

I had a pokerwork to work on here last week.  The pallets had been fixed with wax and on at least one pallet I could see cracks in the wax.  I felt it best to refix  then all.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Rog

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2525
  • Repair and tuning in Hants
Re: old hohner club pallet felt thickness
« Reply #13 on: March 29, 2021, 09:39:07 AM »

I’m pretty sure I saw them fixing pallets with wax in the Bugari factory, but obvs if it becomes or is brittle it’s not the best thing. I see hide glue as well as a fixative. But I’m a hot-glue denier... (:)

Nigel.H

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 586
Re: old hohner club pallet felt thickness
« Reply #14 on: March 29, 2021, 09:53:24 AM »

I did my first re-furb with the Hot Glue Gun but by the second ( and subsequent ) I wondered why I was changing the process from what had stood the test of time for the prior life of the instrument - generally 50 - 70 years - and being a "traditionalist" where possible / sensible I opted for the linen disc and Fish Glue.  It was obvious that the original glue / disc was holding well enough, sometimes needing a fair degree of force to get off and rarely falling off for the sake of being looked at. 

I put a  'blob' on the lever/wire/bar resting on the pallet, I drop a disc on the glue, press the disc down with a fine brush, which absorbs the glue, then another drop of glue which settles onto the work.

I can not say I have ever seen pallets fixed with "wax",  but my guess is that any formulation of wax used for holding pallets to levers is possibly not 'reed' wax with softening agent but more of a 'hard wax' / sealing wax and that the two two tasks may not be comparable ?

Hard wax plus a "Gum" content, rather than soft wax plus rosin ?  Using one for the other may hasten a fail ( especially in hot conditions )  You hear about / see Concertina "pads" held on by blobs of (actual) wax and blobs of Shellac/thick Hide 'type' Glue being described as 'wax', so I guess unless you were there......   ???

Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: old hohner club pallet felt thickness
« Reply #15 on: March 29, 2021, 10:01:17 AM »

When I’ve seen pallets fixed with wax it’s been mostly on piano accordions and the pallets are designed different so that the are secure when waxed.  Wax is a weaker material than hot glue or cloth disc with glue,  so it needs to be used differently.  Pallets designed for wax fixing have a much wider groove, and tend to be longer and the wax fills the space on all sides of the lever end.  Pallets designed for glued cloth discs usually have a narrow grove that is a snug fit on the lever so there’s not sufficient room for melted wax to flow all round the lever.  The example I quoted above with cracked wax had the wax applied on the top surface, and only a limited amount had flowed into the groove resulting in a weaker joint.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Graham W

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 277
Re: old hohner club pallet felt thickness
« Reply #16 on: March 29, 2021, 10:26:41 AM »

No one has mentioned it, but glue sticks come in a whole host of different types for different applications. Glue guns vary widely too.
My experience is that provided surfaces are well prepared and clean of contaminants, and a glue stick appropriate for the materials in question is used in a gun that can heat it to the correct required temperature then hot melt can be superb and can certainly stick a metal arm very securely to a wooden pallet.

A generic cheap gun with a generic ‘general purpose’ glue stick might work well on some things, but will work not very well at all on a lot more.
Logged

Peadar

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2039
Re: old hohner club pallet felt thickness
« Reply #17 on: March 29, 2021, 12:31:03 PM »

The only "hot glue" I use is traditional pearl glue...though I might not distinguish between fish glue and hide glue (do they smell differently when in use?). In the absence of a traditional joiner's glue pot, I heat it in a glass jar sitting in a pan of hot water on the gas stove. 

Confessions - about three years ago a site agent, coming to the end of his career, told me that he had served his time as a joiner  when "the old hot glue" was still in use I nodded sagely without a clue what this was.....I ken now (thanks to Melnet).
.
Logged

Nigel.H

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 586
Re: old hohner club pallet felt thickness
« Reply #18 on: March 29, 2021, 01:17:23 PM »

I love the smell of Hide Glue when 'cooking'....Fish Glue - which I am not so keen on the smell of  :o, albeit I only use it in small doses, comes in 'ready to go' Liquid form so is not 'hot' per se.  Out of the bottle it is not unpleasant. I use Hermann Sachse stuff for leather, card, felt, cloth when suited.  I probably wouldn't use it for highly stressed ( or stressing! ) work but for neat stuff I find it very good and always to hand, where as the 'Gu Pot' and "pearls" are a bit of a hassle for a quick dab, especially as the wife throws it away when it goes 'green' and starts moving around the fridge on it's own. :-X
Logged

Willem Feltkamp

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 129
  • Tinkering and playing diatonics and CBA
Re: old hohner club pallet felt thickness
« Reply #19 on: March 30, 2021, 08:13:07 PM »

Thank you all for your thoughts on this. I've used wax to 'glue' the bass pallets of two club harmonicas in place, but after reading your post I'm reconsidering that.
Logged
Pages: [1] 2   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal