Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Solder won’t stick to reed tongues  (Read 1613 times)

0 Members and 1 Guest are viewing this topic.

mselic

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1683
Solder won’t stick to reed tongues
« on: March 28, 2021, 08:12:22 PM »

I tried adding solder to a reed tip today, but the solder would not stick to the reed. On the occasion when I managed to get some to stay on the reed tongue, it just popped right off after it hardened. Help? I have a temperature controlled iron and got it good and hot, I roughed up the surface of the reed tongue at the tip, and I’m using 50/50 solder with lead. Still no luck.
Logged
C#/D player

tirpous

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1403
Re: Solder won’t stick to reed tongues
« Reply #1 on: March 28, 2021, 08:18:48 PM »

I've never had problems with 50/50 solder with flux (for electronics).  Is that what you're using ?
Logged

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: Solder won’t stick to reed tongues
« Reply #2 on: March 28, 2021, 08:27:53 PM »

It is essential that you clean the reed scrupulously, then I use some flux and prefluxed solder.

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Solder won’t stick to reed tongues
« Reply #3 on: March 28, 2021, 08:29:33 PM »

You need to file the reed where the solder will go.  Fresh steel surface.  Steel is harder to solder than brass or copper.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

mselic

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1683
Re: Solder won’t stick to reed tongues
« Reply #4 on: March 28, 2021, 08:36:43 PM »

I roughed up the reed surface where it was to accept solder but that didn’t help. I’m not sure if the 50/50 solder I have has flux in it or not. Hardware stores aren’t open on Sundays here, but my neighbour says he has lead-free solder as well as flux, so I may try that.
Logged
C#/D player

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: Solder won’t stick to reed tongues
« Reply #5 on: March 28, 2021, 08:38:20 PM »

I roughed up the reed surface where it was to accept solder but that didn’t help. I’m not sure if the 50/50 solder I have has flux in it or not. Hardware stores aren’t open on Sundays here, but my neighbour says he has lead-free solder as well as flux, so I may try that.
You need to do more than rough the surface up it needs to be clear of all contaminates

boxcall

  • You got to love it!!!
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1801
Re: Solder won’t stick to reed tongues
« Reply #6 on: March 28, 2021, 08:49:04 PM »

I roughed up the reed surface where it was to accept solder but that didn’t help. I’m not sure if the 50/50 solder I have has flux in it or not. Hardware stores aren’t open on Sundays here, but my neighbour says he has lead-free solder as well as flux, so I may try that.
You need to do more than rough the surface up it needs to be clear of all contaminates
Flux is a cleaner but I guess more cleaning cannot hurt.
I agree more of a grind on the surface as Theo and you suggest, flux is supposed to remove impurities and surface oxidizing, grinding / filing removes the oxidation quickly.
Logged
Hohner 1040 C, Beltuna one row four stop D, O'Byrne Dewitt/ Baldoni bros. D/C#, Paolo soprani "pepperpot" one row D

hickory-wind

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 627
  • Lives in NY USA near the Erie Canal
    • Bellingers' Button Boxes
Re: Solder won’t stick to reed tongues
« Reply #7 on: March 28, 2021, 09:06:30 PM »

The reed itself needs to be hot enough to melt the solder. Slip a shim or pinger under the reed tip. Put the soldering iron tip on the reed for 10 or 20 seconds before introducing the (fluxed core) solder to preheat it. Push the solder right between where the iron and the reed are touching.
Logged
too many boxes...please buy one, or two, or

mselic

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1683
Re: Solder won’t stick to reed tongues
« Reply #8 on: March 28, 2021, 11:23:37 PM »

It was the flux (or lack thereof). Once I applied flux to the appropriate spot on the reed tongue, the solder stuck without any issue. In fact, I did away with the soldering iron entirely and simply placed a small piece of solder on the reed and melted it in place with a lighter. The entire process only took a few seconds and -presto- it was ready for filing. Thanks, all!
Logged
C#/D player

Dave Praties

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 195
Re: Solder won’t stick to reed tongues
« Reply #9 on: March 29, 2021, 08:46:49 AM »

You probably know this, but keep a file cleaning wire brush to hand when filing lead. It clogs up files badly and quickly.
Dave.
Logged
Castagnari Handry 18 G/C. Castagnari Handry 18 D/G.    Self-built G/C 2.5/12 bass. almost finished after 7 years! Bb/Eb Preciosa. C/F Lilliput.

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Solder won’t stick to reed tongues
« Reply #10 on: March 29, 2021, 09:08:55 AM »

Even better keep an old file for all filing of solder. It can be a coarser one than you would use on reed steel.  It will still need to be cleaned after some use.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

mselic

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1683
Re: Solder won’t stick to reed tongues
« Reply #11 on: March 29, 2021, 11:50:33 AM »

Yes, I have a coarse, cheap file on hand for filing weighted reed tips. I don’t use any of my good files for that.
Logged
C#/D player

Kimric Smythe

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 712
    • Smythe's Accordion Center
Re: Solder won’t stick to reed tongues
« Reply #12 on: April 05, 2021, 06:56:08 AM »

You may have not gotten the reed itself hot enough, it needs to reach the melting temp of the solder to get a good bond.
Electrical solder typically has a lower melting point than say plumbing or tin smithing solder.
Logged
Smythe's Accordion Center
Pinole, California
Sales and repairs since 1997
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal