Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1] 2   Go Down

Author Topic: Comparing Hohner Club - 2 voice Model's for quality of construction.  (Read 2928 times)

0 Members and 1 Guest are viewing this topic.

Nigel.H

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 586

I am familiar with Hohner Pokerwork style Boxes from the early Koch ones, through the 'Poker' style finish to the celluloid covered ones and then back to Chinese ones.  All are fundamentally the same internally in terms of construction re wood and metal, it seems.

I am wondering if the same applies to the various Club ( specifically 2 - voice ) models and - aesthetics apart - whether there are any fundamental differences in constructional / tonal qualities from the early plain lacquered wood finish, through the Modell 1 & Modell 2 logo'd ones with small cases, to the full cased 1's & 2's, the stradella/metal cornered models in wood and in celluloid, the fully celluloid ones - which presumably have a different corner construction - up to the Viktoria ( & Victoria ) ?

I am not at all concerned about the reeds contained within the case, as I am looking for a 'chassis' for a build.  +4 to +7 on the third row, so no limit as such on the model if there is a best option.   I have an inkling as to which Boxes I prefer aesthetically but would prefer not to sacrifice function for looks if some are generally considered better than others. 

Logged

Squeaky Pete

  • Squeaky Pete
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1327
  • Re-hohn a Hohner
Re: Comparing Hohner Club - 2 voice Model's for quality of construction.
« Reply #1 on: April 02, 2021, 08:30:04 PM »

The ones with 4 button half row use the ends of each reedblock for the extra notes. So there is little you can do to them, however they are small, light and similar in feel to a poker work.
The seven button ones are amenable to mods. Extra buttons are possible as the half row uses the middle positions on a full reedblock leaving the end slots blank.
The bass ends can be very different. The mushroom buttons are on a system like the poker work but the larger boxes use a reed sharing system with 4 note bass.
Edit
I like the IIB Victoria. Bigger than you really need but bulletproof.
« Last Edit: April 02, 2021, 09:01:49 PM by Squeaky Pete »
Logged
Poker work DG.
Pariselle 2.6 DG, Ex-Club IIIBS CF,
Matching Liliputs in CF and DG,
Lots of sickly Hohners needing TLC,
Bassoon, Various Bagpipes........

Nigel.H

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 586
Re: Comparing Hohner Club - 2 voice Model's for quality of construction.
« Reply #2 on: April 02, 2021, 09:43:11 PM »

...and therein lies, I think, the pay-off between aesthetics and practicality.  I like the old style/vintage Boxes - the Modell 1's & 2's ( not forgetting Erika's ) but I think a Victoria probably offers more practicality......

I will have a pretty extensive number of options for the build as it is a 33 button treble reed set, but I do not want to use them all.  My other option would be to go 21 + 4 and replicate my Dony button pattern which would have some advantages.



Logged

Squeaky Pete

  • Squeaky Pete
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1327
  • Re-hohn a Hohner
Re: Comparing Hohner Club - 2 voice Model's for quality of construction.
« Reply #3 on: April 02, 2021, 10:12:40 PM »

I am at present trying to sort a workaround to give me a 6 button half row on a club 2 at the expense of the end buttons on the outer row. This will mimic my Pariselle box, which is in itself a bit unusual.
Logged
Poker work DG.
Pariselle 2.6 DG, Ex-Club IIIBS CF,
Matching Liliputs in CF and DG,
Lots of sickly Hohners needing TLC,
Bassoon, Various Bagpipes........

Nigel.H

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 586
Re: Comparing Hohner Club - 2 voice Model's for quality of construction.
« Reply #4 on: April 03, 2021, 10:58:33 AM »

I am pondering......a Viktoria.....with reduced helper row.....down to 4 buttons to mimic the basic layout of the Dony.... it would potentially provide me with a better 'carcass' and 'bare' reed blocks than a Model 2, but allow me the 23 button main row set up, which, would in turn allow me a 3rd button start - it is a low key reed set - and still give me accidentals at the start of the row...for '6' in all ( which would be plenty for me ::) :-[ ).  I would then ( I think ? ) have the benefit of a 'richer' chord option too?....possibly with a couple of extra 'pairs' with a bit of re-jigging.

Decisions....decisions.....



Logged

Nigel.H

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 586
Re: Comparing Hohner Club - 2 voice Model's for quality of construction.
« Reply #5 on: April 03, 2021, 07:23:28 PM »

Chassis acquired, Pete, thanks for the input.....  It looks very tidy and I think it is the best option / compromise for the 'internals' quality/function.  No money really at under £70, in it's original case....

I need to move something 'out' now......

Logged

Squeaky Pete

  • Squeaky Pete
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1327
  • Re-hohn a Hohner
Re: Comparing Hohner Club - 2 voice Model's for quality of construction.
« Reply #6 on: April 03, 2021, 07:31:02 PM »

Looks very clean.
Can we have photos of the insides?
What's your plan for it?
Logged
Poker work DG.
Pariselle 2.6 DG, Ex-Club IIIBS CF,
Matching Liliputs in CF and DG,
Lots of sickly Hohners needing TLC,
Bassoon, Various Bagpipes........

Nigel.H

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 586
Re: Comparing Hohner Club - 2 voice Model's for quality of construction.
« Reply #7 on: April 03, 2021, 08:22:33 PM »

That's the sellers image - I'll do a photo 'reportage' - for my own purposes as much as anything when it arrives.

The plan is a slightly 'left field' one.... I very much like the lower key instruments, but I am 'poor'  ::)  ( or at least my wife tells me I am  :-X )

I had been looking for a part set, or someone selling odd Castagnari reeds because I have an inkling to "tweak" the set up on my  Dony.....some of the 6 accidentals and a couple of the basses on it aren't what ( or where ) I would have them by choice.  I thought Italy would be a good place to delve around in the Small Ads/listings, but for whatever reason Castagnari reeds/instruments seem to have a low profile in Italy?

On Monday first thing I 'dropped' on an Ad for a full set of Castagnari 2 voice reed blocks in F/Bb over there.  The chap was re out-fitting their box in A/N Other key.  They are a bit 'experimental' in the set up.....quite a few unisonoric plates in the Accidentals, but the basics are there for a 23 + 4/5/6/7 box and a big mix and match of bass end formats, based around the usual '4' pairs of an 8 button box +++. I weighed it up on the basis that unisonoric plates can be tweaked to be 'bi' 8) for my purposes.

The intention is to re-fit some of the Dony Accidentals to better suit my needs and fit the Viktoria out - almost certainly as a 23 + 4  - with potentially just the '8' basses......a simpler Hohner-nari Dony'ish, so to speak.  I may extend the bass end to take 'more' buttons up to 12 if it is readily do-able and/or adapt it for 1/3 less chords or put a bass register in.  The bass end isn't really an issue for now, but I do like chords with the extra plate.

So.......that's the 'loose' plan.  I will have to move a couple of 'project boxes' out to make room and some pennies to cover it but the opportunity was too good to pass up, I think and more than kill's two birds with one stone.



Logged

Nigel.H

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 586
Re: Comparing Hohner Club - 2 voice Model's for quality of construction.
« Reply #8 on: April 05, 2021, 08:12:03 PM »


Can we have photos of the insides?


Pete.....I have just been looking at your upgrade to 12 bass thread on your Victoria IIB......do you think I should expect different "internals" on the Bass end of the Viktoria (non IIB ) ? or is it just a change of logo/branding, do we think ?  Honer names do get a bit confusing.

I think it is older - short run with the 'k' instead of the 'c' and if the worst that it offers is having the Pokerwork/Erica style bass mechanism I won't be disappointed.  I will be if it has the x2 block treble end, but I think it will have the three blocks, given the '7' accidental buttons. 

Logged

Squeaky Pete

  • Squeaky Pete
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1327
  • Re-hohn a Hohner
Re: Comparing Hohner Club - 2 voice Model's for quality of construction.
« Reply #9 on: April 05, 2021, 08:35:59 PM »

It will have the 3 treble blocks so you'll be fine.
I don't know what you will find in the bass end, but it's definitely older than my Victoria so I doubt it will have anything to frustrate you.
Logged
Poker work DG.
Pariselle 2.6 DG, Ex-Club IIIBS CF,
Matching Liliputs in CF and DG,
Lots of sickly Hohners needing TLC,
Bassoon, Various Bagpipes........

Nigel.H

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 586
Re: Comparing Hohner Club - 2 voice Model's for quality of construction.
« Reply #10 on: April 13, 2021, 07:35:23 PM »

Well, I think I may have - for reasons of common sense.....to have a re-think on this project.  I have my Castagnari (Treble) reeds.  They sit on three blocks in 12/11/10 2-voice format, as expected and they are in F/Bb, with some low notes/big plates by the knee.  Most Accidentals are on the 3rd block which may/may not come into play.

I don't have the Viktoria yet with it's x3 treble blocks, but I do happen to have a set of 'bare'/reedless blocks from a random Hohner C/F Model II or similar Club 21 +4, ie. the commonly encountered sort with a larger accidental reed at the 'chin' end and a smaller accidental plate by the knee.

My expectation was that I would have to build blocks or adapt whatever is in the 'donor' Box to take the Castagnari Treble plates and that it would be a bit of a game, because, being F/Bb they are quite a bit bigger than what would be coming off the Hohner.

But......having compared the Castagnari blocks to the 'bare' Hohner blocks, somewhat incredulously - albeit there is a circular Hohner 'aperture' to the 'square'ish Castagnari one, apart from one detail, they match/marry/compare precisely for layout on the all important face that meets the instrument.

The flat 'mating' surface of the Castagnari blocks that sit on the Fondo are marginally thinner ( in width ) than the Hohner and probably most critically the Castagnari blocks are one (pair) "cell" shorter than the Hohner ones, ie 12 & 11 rather than 13 & 12 .  The width is no problem as that can easily be overcome and I don't think adding a pair of cells will be a problem.

My intention was always, in respect of the Viktoria with it's 30 buttons, to make it a 23 +4 (or  at most 5 ) Box by reducing the number of accidentals, because I have designs on some of the plates for my Dony +4 notes.

What I am now thinking is that building up the existing Blocks with an extra pair of 'cell's to take a pair of reeds on the existing Castagnari block/s, makes far more sense for insertion straight(ish) into a Modell 2 / Erika than reinventing the wheel for the sake of two extra accidentals on the Viktoria "internals"?

Given what I have established with the comparison of the Blocks I am wondering if any one has been here before - they almost invariably have - and can offer any insight into the pro's and con's of simply dropping - slightly modified - Blocks into the Hohner carcass ?
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Comparing Hohner Club - 2 voice Model's for quality of construction.
« Reply #11 on: April 13, 2021, 07:52:12 PM »

One further check you need to make is the spacing between reed plates along the blocks. Hohner spacing is usually wider.  That will mean that the holes in the reed block will not align with the holes in the fondo. 

Even allowing for that I can’t see any advantage in not using the the blocks that were made for the instrument.  The clamping arrangement will be different and will need modifications at the very least.
« Last Edit: April 13, 2021, 07:54:17 PM by Theo »
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Nigel.H

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 586
Re: Comparing Hohner Club - 2 voice Model's for quality of construction.
« Reply #12 on: April 13, 2021, 08:30:48 PM »

I appreciate the point Theo, but, as I say, incredulously, the alignment of the reed block holes on the Hohner Club Modell (?) Blocks and the alignment of the Castagnari blocks/reeds is a perfect match, all bar being one short.  As per the image/s - I didn't cheat  ;).....block on block, photo from both sides indicating alignment.

Assuming the Hohner block is "to a standard" for a 21+4 Modell Club/Erika, which may be an assumption too far, but tends to be borne out generally ?? model by model, ie. Pokerwork blocks are generally interchangeable I find ?

I think that element may be surmountable and save a lot of work and maintain the quality of the Italian work ?

Reconfiguring the clamps may still be an issue - I will only have to replace 'like for like' to some extent, but again.....I take that point too...
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Comparing Hohner Club - 2 voice Model's for quality of construction.
« Reply #13 on: April 13, 2021, 09:13:03 PM »

You might find the spacing in a Club II and the spacing in the Club Victoria to be different.  Certainly something to check.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Nigel.H

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 586
Re: Comparing Hohner Club - 2 voice Model's for quality of construction.
« Reply #14 on: April 13, 2021, 09:29:24 PM »

Indeed so, Theo, hence the "re-think", I have sourced a Viktoria, intending to strip the reeds and re work the Hohner blocks, which have already been identified as on x3 blocks on that model by Pete.  Having discovered the 'apparent' compatibility between the blocks from what, according to the purchase in early 2020, were for "Akkordeon Stimmstöcke HOHNER CLUB II (auch ERIKA) Ton C/F Diatonisch 1930er" an Erika / Club II seems to be a better option.



Logged

Nigel.H

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 586
Re: Comparing Hohner Club - 2 voice Model's for quality of construction.
« Reply #15 on: April 14, 2021, 02:12:23 PM »

Looks very clean.
Can we have photos of the insides?
What's your plan for it?

Some images Pete.....I have started another thread re. the potential for the build.....it's like new.....and I suspect the Treble reed blocks and bass/chord reeds will be surplus in due course ( in Bb/Eb )

https://1drv.ms/u/s!AnFzxogKXoLYgSQdAxJQlvh8eTtd?e=dQmuSs
Logged

Squeaky Pete

  • Squeaky Pete
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1327
  • Re-hohn a Hohner
Re: Comparing Hohner Club - 2 voice Model's for quality of construction.
« Reply #16 on: April 14, 2021, 03:03:10 PM »

You're right, it looks in splendid condition.
Let me know if you need to find a home for those redundant reeds.  ;-)
Logged
Poker work DG.
Pariselle 2.6 DG, Ex-Club IIIBS CF,
Matching Liliputs in CF and DG,
Lots of sickly Hohners needing TLC,
Bassoon, Various Bagpipes........

Winston Smith

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4066
  • AKA Edward Jennings
    • "Our Luxor B&B" Luxor life, slice by slice.
Re: Comparing Hohner Club - 2 voice Model's for quality of construction.
« Reply #17 on: April 14, 2021, 03:23:07 PM »

Aaah! I see Pete beat me to it regarding your old reeds; never mind.
Logged
At last, broken and resigned to accept conformity.
Oh, how I LOVE Big Brother!

Nigel.H

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 586
Re: Comparing Hohner Club - 2 voice Model's for quality of construction.
« Reply #18 on: May 19, 2021, 10:00:33 PM »

Here is an "Out of interest" question.  Will Allen has just posted up a lovely rendition of William & Nancy on MelNet on F/B.

It is on his F/Bb box.  I can not make out the 'gap' ie. the tuning. It feels to be somewhere around 7 -10 cent's ? does anyone have the technical kit or the quality of "ear" to suggest where it is ?

I have checked my Castagnari reed's and they are at a typical 3 - 4'ish cents on the tuner ( out of the Box on the tuning table) and I feel that for my purposes, at this low tuning, they are a bit dry and therefore, feel a bit 'dull'.  I think a bit more of a gap might give them more brightness and Will's ( albeit probably A.N.Other quality maker ) are closer to what I am looking for.   
Logged

Rob2Hook

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2278
  • Castagnaris, Hohners & Baffetti
Re: Comparing Hohner Club - 2 voice Model's for quality of construction.
« Reply #19 on: May 20, 2021, 01:54:14 AM »

I suspect that if you ask Will will tell you.  He always seems to be the type to offer encouragement.  If you're right about the offset being about double what you currently have, it opens up the option of flattening what are currently the on-pitch reeds to achieve Vienna tuning.

Rob.
Logged
Pages: [1] 2   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal