Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1] 2   Go Down

Author Topic: information is desired  (Read 2332 times)

0 Members and 1 Guest are viewing this topic.

dino.pafftti

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 464
information is desired
« on: April 10, 2021, 09:52:29 AM »

hi ,, i would like to know the english name of this "list" ??   And, is there any information on where I can buy them ??
Logged

Peadar

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2039
Re: information is desired
« Reply #1 on: April 10, 2021, 10:18:26 AM »

The whole thing in your photograph is a "mechanism" the part that your red arrow points to is a "soleplate" . It could also be called a "baseplate" or a "mounting bracket". This part is a "stamping" - because it has been made by "stamping" from sheet metal.

I hope this helps.
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: information is desired
« Reply #2 on: April 10, 2021, 10:23:40 AM »

The part with the arrow is Portaripetini in Italian.  It come in varies different spacings.   All available from Carini
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

dino.pafftti

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 464
Re: information is desired
« Reply #3 on: April 10, 2021, 11:53:35 AM »

Thank you,    I have sometimes tried to buy something from there parts, but he does not want to sell small amounts of .. there seem to be only a couple of shops that sell them ,, freight rates from Italy are currently very expensive,  :-[
Logged

dino.pafftti

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 464
Re: information is desired
« Reply #4 on: April 10, 2021, 11:58:52 AM »

The whole thing in your photograph is a "mechanism" the part that your red arrow points to is a "soleplate" . It could also be called a "baseplate" or a "mounting bracket". This part is a "stamping" - because it has been made by "stamping" from sheet metal.

I hope this helps.

Thanks,,,
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: information is desired
« Reply #5 on: April 10, 2021, 12:12:11 PM »

You could also try Agenzia Italia.  Perhaps they will supply small quantities?
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

dino.pafftti

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 464
Re: information is desired
« Reply #6 on: April 10, 2021, 12:33:28 PM »

ok, thanks  (:)
Logged

mselic

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1683
Re: information is desired
« Reply #7 on: April 10, 2021, 12:39:42 PM »

Well that’s amazing - I was about to create a post asking the very same question!
Logged
C#/D player

mselic

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1683
Re: information is desired
« Reply #8 on: April 10, 2021, 12:46:21 PM »

I’m also looking for the other components in the OP’s picture - the cantilevered rods, etc that would connect with the pallets. I scoured Carini’s site but was unable to find the rest of the mechanism.
Logged
C#/D player

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: information is desired
« Reply #9 on: April 10, 2021, 01:02:14 PM »

I’m also looking for the other components in the OP’s picture - the cantilevered rods, etc that would connect with the pallets. I scoured Carini’s site but was unable to find the rest of the mechanism.

This one I think

Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

mselic

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1683
Re: information is desired
« Reply #10 on: April 10, 2021, 01:33:41 PM »

Thank you, Theo.  I’m assuming that these would be quite pliable, as I would have to put a 90 degree bend in one end (to be inserted into the “Portaripetini”), and the same or slighter more for the end that would rest on the button pallet lever.
Logged
C#/D player

Nigel.H

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 586
Re: information is desired
« Reply #11 on: April 10, 2021, 01:40:40 PM »

freight rates from Italy are currently very expensive,  :-[

And greater than the cost in €'s is that in raw emotion and distress if you are unlucky enough to find yourself in the hands of Poste Italiane.

They have to be the worst International service out there.  I know that Social Media can be used to "trash" people and businesses and that some people just love to moan......but with a Feedback of 3,300+ and an aggregate rating of "1.2" !!, to which I would gladly add my voice to the call for a 0• option!!  I think the facts tend to speak for themselves.
https://uk.trustpilot.com/review/posteitaliane.it?b=MTU4MTYwOTI1MjAwMHw1ZTQ1NzEyNDNjOTNhZTA4NjQ5ZWNiZjc

I remain hopeful that an item last tracked to Milan on 03/04 will get here eventually..... according to Poste Italiane it "appears" ( their term) to be in the Uk!! so someone knows something their Tracking system doesn't.

NB this is not an Easter/C-19 situation I don't think..... the history is long and horrible!
 
« Last Edit: April 10, 2021, 01:42:19 PM by Nigel.H »
Logged

Graham W

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 277
Re: information is desired
« Reply #12 on: April 10, 2021, 02:28:18 PM »

Thank you, Theo.  I’m assuming that these would be quite pliable, as I would have to put a 90 degree bend in one end (to be inserted into the “Portaripetini”), and the same or slighter more for the end that would rest on the button pallet lever.

These can be made quite easily to exactly the dimensions you need, and save on the shipping costs.
I have used 3/32 stainless TIG welding rods as a source of suitable metal stock, and silver brazed the arms on as needed. This is very slightly thicker than Italian sourced mechanism parts (which mostly seem to be 2.2mm dia as far as I have seen, at least). I have tried 2mm, but it felt rather ‘flexier’ than I was happy with.
(I’ve entirely failed to find a source of 2.2mm stainless rod - which would be perfect -in the uk. Does anyone know of anywhere?)

Good luck,
Graham
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: information is desired
« Reply #13 on: April 10, 2021, 02:45:14 PM »

Thank you, Theo.  I’m assuming that these would be quite pliable, as I would have to put a 90 degree bend in one end (to be inserted into the “Portaripetini”), and the same or slighter more for the end that would rest on the button pallet lever.

Yes they are intended to be formed into a variety of shapes. 
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

dino.pafftti

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 464
Re: information is desired
« Reply #14 on: April 10, 2021, 03:14:17 PM »

freight rates from Italy are currently very expensive,  :-[

And greater than the cost in €'s is that in raw emotion and distress if you are unlucky enough to find yourself in the hands of Poste Italiane.

They have to be the worst International service out there.  I know that Social Media can be used to "trash" people and businesses and that some people just love to moan......but with a Feedback of 3,300+ and an aggregate rating of "1.2" !!, to which I would gladly add my voice to the call for a 0• option!!  I think the facts tend to speak for themselves.
https://uk.trustpilot.com/review/posteitaliane.it?b=MTU4MTYwOTI1MjAwMHw1ZTQ1NzEyNDNjOTNhZTA4NjQ5ZWNiZjc

I remain hopeful that an item last tracked to Milan on 03/04 will get here eventually..... according to Poste Italiane it "appears" ( their term) to be in the Uk!! so someone knows something their Tracking system doesn't.

NB this is not an Easter/C-19 situation I don't think..... the history is long and horrible!

I was sent a package from Italy, Accordions parts ,, I got wool yarn, 5 packages,,  the post office definitely mixed the address labels, I don't know where the parts are, I'm waiting ,, :|bl
Logged

mselic

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1683
Re: information is desired
« Reply #15 on: April 10, 2021, 03:27:26 PM »

I trust this is relevant to the thread:

Here is a system that I am looking to replace. The “Portaripetini” in the OP’s photo houses the cantilevered rods like a freestanding axle, whereas the one in my photo has them pressed up directly against the soundboard, which creates drag and resistance. I’ve countered this by loosening the screws that fastens the assembly down, but this in turn creates a slightly noisy action as the ends of the rods now have room to move. Not a great design in my opinion, and the system that both Paolos and Hohners use is much better and eliminates this problem entirely.

EDITED TO ADD: in case it isn’t clear, the piece that holds the cantilevered ends down at the top of the photo is open on the side that faces down, so there is direct contact between a moving part and the soundboard.
« Last Edit: April 10, 2021, 05:20:45 PM by mselic »
Logged
C#/D player

dino.pafftti

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 464
Re: information is desired
« Reply #16 on: April 10, 2021, 03:28:27 PM »

Thank you, Theo.  I’m assuming that these would be quite pliable, as I would have to put a 90 degree bend in one end (to be inserted into the “Portaripetini”), and the same or slighter more for the end that would rest on the button pallet lever.

These can be made quite easily to exactly the dimensions you need, and save on the shipping costs.
I have used 3/32 stainless TIG welding rods as a source of suitable metal stock, and silver brazed the arms on as needed. This is very slightly thicker than Italian sourced mechanism parts (which mostly seem to be 2.2mm dia as far as I have seen, at least). I have tried 2mm, but it felt rather ‘flexier’ than I was happy with.
(I’ve entirely failed to find a source of 2.2mm stainless rod - which would be perfect -in the uk. Does anyone know of anywhere?)

Good luck,
Graham

I have a 2.2mm hot-dip galvanized wire, (care taker) I've been doing this all sorts of levers, tyssä weld ,,, I could do for you, I don't need money, maybe postage
Logged

Nigel.H

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 586
Re: information is desired
« Reply #17 on: April 10, 2021, 03:38:45 PM »


I was sent a package from Italy, Accordions parts ,, I got wool yarn, 5 packages,,  the post office definitely mixed the address labels, I don't know where the parts are, I'm waiting ,, :|bl

We can join the 94% of dissatisfied customers! ::) and I fear you may have to wait a while.  If I had seen the Feedback before entrusting  ( via a Seller ) a valuable set of reeds/block's to them I would never have taken the risk.

Years ago I used to 'trade' a lot of vintage fishing tackle, some of it a bit awkward, but I sent all over North America, Scandinavia, Europe, the Far East. The only trouble I ever had was in Italy.  A rod ( in tube ) went missing for "months" and was eventually returned to me.  It was labeled via a substantial sticker indicating "No Recipient / Consignee Address" or some such.  There wasn't - they had stuck the sticker over it!!  >:( I presume it wouldn't fit in the van ( or on the bike ) and that was the easiest "out".

I think DHL operate out of Italy.......they - in my experience - offer a trustworthy service and I would rather pay a premium for a decent service.


Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: information is desired
« Reply #18 on: April 10, 2021, 03:51:04 PM »

All the parts I've had from Italy have been sent by courier, usually UPS,  delivery has always been prompt.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Nigel.H

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 586
Re: information is desired
« Reply #19 on: April 10, 2021, 03:59:51 PM »

All the parts I've had from Italy have been sent by courier, usually UPS,  delivery has always been prompt.
As I say......I won't make that mistake again.  I like to work with sellers and often their local 'National Post Office' is easiest for them, especially non business sellers, in rural areas/small towns, where they don't have access to the 'International carriers', but in future, I'll stay away this particular one or go without.
Logged
Pages: [1] 2   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal