Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Hohner Viktoria Club (to Hohner'Nari Bitsa )  (Read 1612 times)

0 Members and 1 Guest are viewing this topic.

Nigel.H

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 586
Hohner Viktoria Club (to Hohner'Nari Bitsa )
« on: April 14, 2021, 02:09:49 PM »

My recently acquired Viktoria Club has arrived safely from Germany.  I appreciate most fettler's will be familiar with the "internals" of these and the subsequent models, but this one is "like new" so I though a good example to post up some images of.  It has a serial number, which, if the pattern applies from the Lilliput thread, dates it to 1935, which I would imagine is quite early in the Viktoria/Victoria lineage.
It looks as if it has spent most of the last 80+ years unused, in it's case, bellows are excellent, which is nice, with no obvious wear. Reeds are spotless (Bb/Eb tuning ) this may turn into an advert for them ! in due course.

As an aside, my purpose for buying it was ( is ? ) to re-outfit it, by some means, with a set of reeds from a 'quirky', but essentially viable Italian Box.

I had established - somewhat surprisingly, I thought, that the "Fondo Fit" of the blocks for Hohner Club Modell II ( and presumably Erika ) Club boxes matched perfectly the 'holes' for the modern Italian Reed blocks, via a set of de-reeded Erika ones which I had to hand.

I expected that the '3' block set up of the Viktoria, which had initially seemed a "plus" would actually mean it could not be used to work with the Italian set.  This, however, has proved not to be the case as the Viktoria Reed Block "plate", is drilled to exactly the same pattern/distancing as the Erika Club one.  The only difference being that the Viktoria has '12' & '11' holes, not the 12 & 13 of the Erika, which actually suits my proposed build better, as it means I no longer have to adapt the Italian Blocks with any extra cell's/reeds, just (hopefully) modify the clamping/bracing process.

I guess it makes sense that Hohner were using "jigs" and simply producing 'plates' by the x# with standardised spacing across their range.  The indication that (some) modern Italian distancing is the same is just good luck? 

It means I can keep my Accidental block as a separate unit, although I do intend to reduce the number of plates and buttons slightly.

The Bass side is a different layout and I will probably have to modify the Hohner blocks or make a new set.

The objective is to create a 'low voice' Box, with high quality reeds in a "decent' carcass, for a 'pension friendly' price :o ::) :-X

A bit like Will Allen's but without the beard ( or the ability to play it  ::) )

Having wavered when not sure about the layout, I think, again, the Viktoria is a good option as a 'base', especially now I have it in hand.

Outlay thus far, the wife  :-* says, is "manageable", which must mean it is less than she spends on Crafting.....  ::) 

Some pics for posterity before I set about it.

https://1drv.ms/u/s!AnFzxogKXoLYgSQdAxJQlvh8eTtd?e=dQmuSs
Logged

Winston Smith

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4066
  • AKA Edward Jennings
    • "Our Luxor B&B" Luxor life, slice by slice.
Re: Hohner Viktoria Club (to Hohner'Nari Bitsa )
« Reply #1 on: April 14, 2021, 03:20:26 PM »

I think that box would have a glorious sound to it as it is! Such a shame that it has to be sacrificed to give you what you really want. And at £70 (was that right?) certainly a snip!

The internals look to be the same as a Club 111 which I have under the bench (as yet!) apart from the bass linkage which is stamped plate as opposed to yours having bent wires.

Good luck with your efforts, I'm sure we'll all be eager to see your work in progress and to hear it when it all comes together. Many thanks for posting these pics.
Logged
At last, broken and resigned to accept conformity.
Oh, how I LOVE Big Brother!

Winston Smith

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4066
  • AKA Edward Jennings
    • "Our Luxor B&B" Luxor life, slice by slice.
Re: Hohner Viktoria Club (to Hohner'Nari Bitsa )
« Reply #2 on: April 14, 2021, 03:27:08 PM »

"I guess it makes sense that Hohner were using "jigs""

I would have expected that too, Nigel. But when you look at your bass fondo picture; a jig certainly wasn't used on those chord vents!
Logged
At last, broken and resigned to accept conformity.
Oh, how I LOVE Big Brother!

Fred

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 719
  • G/C Pariselle, D/G Loffet & maybe too many Hohners
Re: Hohner Viktoria Club (to Hohner'Nari Bitsa )
« Reply #3 on: April 14, 2021, 04:17:58 PM »

Those instruments are beautiful. I have a Viktoria in similar (i.e. almost pristine) condition that has been waiting for a "triple R treatment" (revalve, rewax, retune) for longer than I care to admit... :D

Mine has a way higher serial number though: 166731
Can it really be the case that Hohner produced that many of this model?
Logged

Nigel.H

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 586
Re: Hohner Viktoria Club (to Hohner'Nari Bitsa )
« Reply #4 on: April 14, 2021, 04:40:56 PM »


I'll see if I can sort a sound file.....bad enough without doing "Club" and a built in button fail::)

You see a lot of Victoria model, Fred, which are identical and appear to be synonymous in listings, irrespective of the letters on the Box, ie, listing for Viktoria with "Victoria" on the case and vice verse. Most of the viKtoria's seem old, but also, looking at the Lilliput serial number thread, lots of models seem to have used the same numbering system so numbers rose exponentially in quite a short time as 1,000's of units were made.....so much so that before long they gave up counting it seems!
« Last Edit: December 08, 2025, 05:56:33 PM by Nigel.H »
Logged

Eshed

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 447
Re: Hohner Viktoria Club (to Hohner'Nari Bitsa )
« Reply #5 on: April 14, 2021, 05:13:44 PM »

Those instruments are beautiful. I have a Viktoria in similar (i.e. almost pristine) condition that has been waiting for a "triple R treatment" (revalve, rewax, retune) for longer than I care to admit... :D

Mine has a way higher serial number though: 166731
Can it really be the case that Hohner produced that many of this model?
Model numbers seem to have been shared between instruments between 1935-194?. 53227 should be in 1935 while 166731 should be late 1935 or very early 1936.
Logged
Do you have a Hohner from 1934-1945 with a serial number on?
Send me a private message or comment on the German Accordion Problem spreadsheet to improve the statistics of the project and get an estimate of the production date of the box if it is not known.

Nigel.H

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 586
Re: Hohner Viktoria Club (to Hohner'Nari Bitsa )
« Reply #6 on: April 14, 2021, 06:19:26 PM »

I am really not sure I am the man to 'demonstrate' an instrument  :|bl, but, given that I doubt it has been played for years and probably not much then, I guess one can't expect too much, which is just as well with me doing the squeezing,  ::) especially as it is 'clubbed' on both ends and my brain/fingers aren't.

I had to interrupt someone watching an 8 year old series of Portrait artist of the Year, to hold the phone so angst levels were high, even before the red light went on. :-\

Anyway, it just goes to show that old Hohner's may get a bit cranky, but even abandoned to their own devices, they don't die....although my fingers frequently do.

https://vimeo.com/536892219
« Last Edit: April 14, 2021, 06:24:25 PM by Nigel.H »
Logged

Fred

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 719
  • G/C Pariselle, D/G Loffet & maybe too many Hohners
Re: Hohner Viktoria Club (to Hohner'Nari Bitsa )
« Reply #7 on: April 14, 2021, 07:11:34 PM »

Those instruments are beautiful. I have a Viktoria in similar (i.e. almost pristine) condition that has been waiting for a "triple R treatment" (revalve, rewax, retune) for longer than I care to admit... :D

Mine has a way higher serial number though: 166731
Can it really be the case that Hohner produced that many of this model?
Model numbers seem to have been shared between instruments between 1935-194?. 53227 should be in 1935 while 166731 should be late 1935 or very early 1936.

Eshed with the wisdom. Thanks! :)
Logged

Rob2Hook

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2278
  • Castagnaris, Hohners & Baffetti
Re: Hohner Viktoria Club (to Hohner'Nari Bitsa )
« Reply #8 on: April 14, 2021, 07:51:53 PM »

Just a little sour - as said, requires the 3Rs.  I've always thought the Viktoria to be particularly bright and articulate.  Although there's enough real estate inside to build those 2000 new houses, it's not heavy, just as a Pokerwork isn't heavy.  All round good box, much more to my taste than the three voice Clubs.  Yes, there's one that lives beside my sofa, just in case the mood takes me.

Interesting to note that all the levers have the curve to allow room for the accidentals/helper row.  I guess one could convert to a three row!

Rob.
Logged

Squeaky Pete

  • Squeaky Pete
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1327
  • Re-hohn a Hohner
Re: Hohner Viktoria Club (to Hohner'Nari Bitsa )
« Reply #9 on: April 14, 2021, 08:09:39 PM »

It has been done Rob. I'll post a pic when I've finished the bass reeds. Treble end is done.
JNMSY has done a lovely job on a Club IIB
Logged
Poker work DG.
Pariselle 2.6 DG, Ex-Club IIIBS CF,
Matching Liliputs in CF and DG,
Lots of sickly Hohners needing TLC,
Bassoon, Various Bagpipes........

Nigel.H

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 586
Re: Hohner Viktoria Club (to Hohner'Nari Bitsa )
« Reply #10 on: April 15, 2021, 01:02:13 PM »

Instinct suggested that swopping over the Treble blocks wouldn't be a difficult job.  It wasn't. I removed/re-fashioned the Hohner fitting points and just 'stepped' or re-fitted them to suit.  The Castagnari blocks needed just a little fettling to make them suited to fit.

The two main 'banks' are a straight swop, with that small amount of tweaking to the fitting points.   The Accidental row, is not, but, the "hole to aperture" fit is..... just not the numbers  ??? but that is going to need some thought regarding plates etc.  The ones that 'should' play, play.

It all plays "straight out of the (refitted) box" as per the updated video.  I'll sort the button clatter and my fingers out in time :|bl.

It had the Dutch Reversal on the F/G plate on the 2nd row, so I had to turn the plate, but that was straightforward enough.

Fortune favours, for now.......the process will be slightly more complicated on the Bass end and there are quite a few plates to move/tweak, outside of the usual ones, because so many are 'unisonoric' and a couple in odd places or ( as per the discussion the other day re. Ian's "D or E" button, some which are different to the Dony I am used to.

https://1drv.ms/u/s!AnFzxogKXoLYgTnqU4Vl_fAAjNAd?e=4vXpea

It plays a bit fast/slippery at the moment, but I'll get the feel for it once the buttons are sorted.

https://vimeo.com/537223471


   
Logged

Squeaky Pete

  • Squeaky Pete
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1327
  • Re-hohn a Hohner
Re: Hohner Viktoria Club (to Hohner'Nari Bitsa )
« Reply #11 on: April 15, 2021, 01:40:14 PM »

That sounds really promising.
Not much tuning and you're there.
Logged
Poker work DG.
Pariselle 2.6 DG, Ex-Club IIIBS CF,
Matching Liliputs in CF and DG,
Lots of sickly Hohners needing TLC,
Bassoon, Various Bagpipes........

Rob2Hook

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2278
  • Castagnaris, Hohners & Baffetti
Re: Hohner Viktoria Club (to Hohner'Nari Bitsa )
« Reply #12 on: April 23, 2021, 01:23:46 AM »

It plays a bit fast/slippery at the moment, but I'll get the feel for it once the buttons are sorted.

https://vimeo.com/537223471

Interesting and rather nice tone!  It sounds like neither a Castagnari nor a Hohner, yet has good clear tonal charcteristics from both its donors.  That is to say it retains good performance whilst it could not be recognized in a blind test as having the sound of either brand.  Seems you've discovered a new hybrid!  I wonder whether they'll breed true...?

Rob
Logged

Nigel.H

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 586
Re: Hohner Viktoria Club (to Hohner'Nari Bitsa )
« Reply #13 on: April 23, 2021, 10:10:14 AM »

I have sorted the lever drop, and done the left side.  I was intending to post up a new sound file (last) Monday morning before coming away for the week so I could get an impression from others as to the 'wetness' as per the ongoing Castagnari thread, but "stuff" got in the way.  I'll put one up next week.

As it stands it sounds pretty 'dry' ? to my ear.  On my Tuner App it seems to hold - when played for the sake of establishing the tone rather than in normal play - at around 4 +/- cents, button by button, with very little tremolo ?  Perhaps a bit 'raspy' on the low notes and to be critical a bit 'dull' albeit bearing that apparent sharpness.

It plays much better with the button height "managed" and is much more 'sonorous' with the Bass / Chords in.  It was ( I think ) a 2 - reed base and 2 - reed ( with thirds ) chord set up as a Matris, it is now a 3 - reed bass with 4 - reed / 2 octave 'No thirds' chords.

As per Theo's advice on another thread, it has made the chord's "brighter" using the octave reeds, rather than simply doubling up on the lower ones.

Very much a work in progress still .......but not this week....
Logged
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal