Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1] 2   Go Down

Author Topic: zinc plate adhesive  (Read 2221 times)

0 Members and 1 Guest are viewing this topic.

dino.pafftti

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 464
zinc plate adhesive
« on: April 17, 2021, 06:03:19 AM »

I glued the plastic valves to the zinc reeds plate , glue Pattex . But I think the glue does not stick well to the zinc plate..   is there any better glue for gluing the valves ??
Logged

diatonix

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 622
Re: zinc plate adhesive
« Reply #1 on: April 17, 2021, 09:00:54 AM »

I don't think Pattex is a good choice in the first place. Very messy and tends to eat the plastic valves.
Logged

dino.pafftti

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 464
Re: zinc plate adhesive
« Reply #2 on: April 17, 2021, 09:18:00 AM »

I don't think Pattex is a good choice in the first place. Very messy and tends to eat the plastic valves.

tell the amateur which glue is good? zinc / plastic  ? maybe shell lac ??
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: zinc plate adhesive
« Reply #3 on: April 17, 2021, 09:28:15 AM »

I’m not familiar with Pattex, I don’t think it’s widely available in the UK.

I have used contact adhesive with complete success for many years. For a long time I used this:
https://www.hobbycraft.co.uk/bostik-contact-adhesive-50ml/561220-1000

Then I found that Carini sell a special valve adhesive so I orders some.  When it arrived I discovered it was sold for leather repairs.  It works very well too.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: zinc plate adhesive
« Reply #4 on: April 17, 2021, 09:34:16 AM »

I have used contact adhesive with complete success for many years. For a long time I used this:
https://www.hobbycraft.co.uk/bostik-contact-adhesive-50ml/561220-1000

Then I found that Carini sell a special valve adhesive so I orders some.  When it arrived I discovered it was sold for leather repairs.  It works very well too.

Theo - do you think that the special valve adhesive is any better than Bostik contact adhesive? If Bostik works 'with complete success', why change?
I ask because I have also used Bostik contact adhesive for many years and I am reluctant to change.
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

diatonix

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 622
Re: zinc plate adhesive
« Reply #5 on: April 17, 2021, 09:34:43 AM »

Bostik would be my first choice too (if it were still available here in Norway...).
« Last Edit: April 17, 2021, 11:23:38 AM by diatonix »
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: zinc plate adhesive
« Reply #6 on: April 17, 2021, 09:40:06 AM »

They are pretty much the same in function.  The Carini stuff is in a much  bigger tube and works out a bit cheaper if like me you use a lot.

I’m always looking for possible improvements in materials and methods,  so when I found the “industry standard” valve adhesive I just had to try it. As it turns out both adhesives do an excellent job. At present I have a tube of each other no use.  I use whichever one I find first!
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Tone Dumb Greg

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4955
    • Dartmoor Border Morris
Re: zinc plate adhesive
« Reply #7 on: April 17, 2021, 09:43:04 AM »

Pattex is a brand under which Henkel products are marketed. Their complete range seems to be similar to Bostic's range of adhesive types.
Logged
Greg Smith
DG/GC Pokerwork, DG 2.4 Saltarelle, pre-war CF Hohner, Hohner 1040 Vienna style, old  BbEb Hohner that needs a lot of work.

ACCORDION, n. An instrument in harmony with the sentiments of an assassin. Ambrose Bierce

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: zinc plate adhesive
« Reply #8 on: April 17, 2021, 09:44:30 AM »

And going back to the original question I’ve not found and difference between in their ability to stick to  zinc or aluminium plates.

Shellac was used in the old days before plastic.  It works with leather but my experiments using it on plastic seemed to stick less securely.  It’s also a great deal more trouble to use.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

dino.pafftti

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 464
Re: zinc plate adhesive
« Reply #9 on: April 17, 2021, 10:00:45 AM »

Thanks for all the answers, I try to look for bostik glue, I was just wondering if that old zinc plate is so slippery that the glue didn't stick to it properly ?? ::)
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: zinc plate adhesive
« Reply #10 on: April 17, 2021, 10:01:58 AM »

The metal has to be clean of course.  Bostik make many different adhesives,  I’ve only tried the one in the link.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Winston Smith

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4066
  • AKA Edward Jennings
    • "Our Luxor B&B" Luxor life, slice by slice.
Re: zinc plate adhesive
« Reply #11 on: April 17, 2021, 10:06:54 AM »

" I use whichever one I find first!"

I've seen your workshop! I love a laugh in the morning, thank you Theo.
Logged
At last, broken and resigned to accept conformity.
Oh, how I LOVE Big Brother!

Nigel.H

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 586
Re: zinc plate adhesive
« Reply #12 on: April 17, 2021, 10:56:38 AM »

Here is my 'shout'...... 3M 1099 Vinyl adhesive decanted into a (blunt) needle syringe.  Keeps the glue 'solvent' for days (weeks ? ) no strings/runs/gloop's/glob's. Delivers a perfect minimalist line of glue to the metal around the edge of the reed hole.

Designed to stick vinyl to........'metal' unlike many.

If you could still get the Bostik Solvent Free that they discontinued I would still be using that but I find contact adhesive smelly, stringy and a bit 'mind of it's own'.  Having said that I am ham-fisted.



Logged

folkloristmark

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 582
    • street entertainers
Re: zinc plate adhesive
« Reply #13 on: April 17, 2021, 12:06:00 PM »

The metal has to be clean and solvent free if you cleaned in a solvent. I use contact glue made for leather repairs but anything like bostick. I find the leather glue easy and cheap and consistent in quality.I have also used wax and shellac but too much effort for worse results.If you have a set of reeds that wont take its often because they have something on them.
Logged
Mark Taylor
Folkloristmark

Andy

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 159
Re: zinc plate adhesive
« Reply #14 on: April 17, 2021, 02:20:19 PM »

I’m not familiar with Pattex, I don’t think it’s widely available in the UK.

I have used contact adhesive with complete success for many years. For a long time I used this:
https://www.hobbycraft.co.uk/bostik-contact-adhesive-50ml/561220-1000

Then I found that Carini sell a special valve adhesive so I orders some.  When it arrived I discovered it was sold for leather repairs.  It works very well too.
Sorry to be a pain, as I know the topic of valve adhesive is one that never goes away, but is that version of Bostik a solvent based or water based one? I'm never very sure which would be best as I would be concerned that solvent based might damage plastic valves whereas water based could be a greater reed corrosion risk.

Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: zinc plate adhesive
« Reply #15 on: April 17, 2021, 02:29:33 PM »

You do have to check solvent based adhesives with the valves you use.   The Bostik I linked to is solvent based, and it doesn't damage the valves I use.  Always do some tests before doing the full job.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

dino.pafftti

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 464
Re: zinc plate adhesive
« Reply #16 on: April 17, 2021, 02:38:46 PM »

The metal has to be clean and solvent free if you cleaned in a solvent. I use contact glue made for leather repairs but anything like bostick. I find the leather glue easy and cheap and consistent in quality.I have also used wax and shellac but too much effort for worse results.If you have a set of reeds that wont take its often because they have something on them.

I looked at that bostik glue, I didn't find the same one in Finland .. I thought I would order it from English, but glue € 5.59 + transport € 20.00 + Finnish customs tax 22%  ,,,  There will be expensive glue ...  I have to look for something similar  ,,, This is difficult, many opinions  ???
Logged

Graham Spencer

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3548
  • MAD as a wet Hohner........
Re: zinc plate adhesive
« Reply #17 on: April 17, 2021, 03:25:27 PM »

I’m not familiar with Pattex, I don’t think it’s widely available in the UK.

I have used contact adhesive with complete success for many years. For a long time I used this:
https://www.hobbycraft.co.uk/bostik-contact-adhesive-50ml/561220-1000

Then I found that Carini sell a special valve adhesive so I orders some.  When it arrived I discovered it was sold for leather repairs.  It works very well too.

Pattex is widely available here in Cyprus. I've had no problem with their contact adhesive, but I always ensure that surfaces are as clean as I can get them and that I leave a decent drying time before mating the parts.  Similar results with UHU contact and Black Bison contact.  It may be that the time you need to leave contact adhesives before actually making the joint is the problem - it seems counter-intuitive to leave the glue to dry BEFORE mating the parts, but that's the way contact adhesive works.

Graham
« Last Edit: April 17, 2021, 06:04:42 PM by Graham Spencer »
Logged
Among others, Saltarelle Pastourelle II D/G; Hohner 4-stop 1-rows in C & G; assorted Hohners; 3-voice German (?) G/C of uncertain parentage; lovely little Hlavacek 1-row Heligonka; Bâ™­/Eâ™­ Koch. Newly acquired G/C Hohner Viktoria. Also Fender Jazz bass, Telecaster, Stratocaster, Epiphone Sheraton, Charvel-Jackson 00-style acoustic guitar, Danelectro 12-string and other stuff..........

Squeezing in the Cyprus sunshine

Nigel.H

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 586
Logged
Pages: [1] 2   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal