Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: 1 [2]   Go Down

Author Topic: zinc plate adhesive  (Read 2209 times)

0 Members and 1 Guest are viewing this topic.

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: zinc plate adhesive
« Reply #20 on: April 17, 2021, 07:05:33 PM »

...Pattex is widely available here in Cyprus. I've had no problem with their contact adhesive, but I always ensure that surfaces are as clean as I can get them and that I leave a decent drying time before mating the parts.  Similar results with UHU contact and Black Bison contact.  It may be that the time you need to leave contact adhesives before actually making the joint is the problem - it seems counter-intuitive to leave the glue to dry BEFORE mating the parts, but that's the way contact adhesive works.
Not sure about the adhesives you mention, but when attaching valves, the common practice among fettlers here is to simply put a single application of contact adhesive on the valve and immediately press into place on the reed plate. Works for me (as they say).
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: zinc plate adhesive
« Reply #21 on: April 17, 2021, 10:26:53 PM »

That’s what I do too.  It’s quicker and means you have some time if you need to adjust the position of the valve.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

dino.pafftti

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 464
Re: zinc plate adhesive
« Reply #22 on: April 18, 2021, 04:53:57 AM »

That’s what I do too.  It’s quicker and means you have some time if you need to adjust the position of the valve.

i did the same but still have to research what i Iam doing wrong, I try another glue
Logged

Rog

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2525
  • Repair and tuning in Hants
Re: zinc plate adhesive
« Reply #23 on: April 19, 2021, 01:41:47 PM »

I’ve just bought a tin of Evo-Stik solvent free contact adhesive, cos the Bostik solvent free stuff doesn’t seem to be available in the UK at the moment. Personally I like the solvent free stuff cos it’s not as stringy or smelly as e.g. Impact.
Also, because I sometimes revalve full size 4 voice PAs (hours of fun, dontcha know), I’ve taken to dabbing the glue onto the plate with a little spatula, rather than onto the valve. By the time I’ve dabbed a whole row the glue has dried a bit and is perfect for grabbing the valve. I then attach the valves. I find this faster by quite a margin than applying glue to the valve and then attaching it, because I’m not switching from glue to valve and back. But perhaps I’m just a slow coach when it comes to attaching valves.
« Last Edit: April 19, 2021, 01:43:45 PM by RogerT »
Logged

Andy Next Tune

  • aka Andy Wooles
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1127
  • Melodeon with Accidentals? Make a PI Claim!!!
    • www.shavethedonkey.co.uk
Re: zinc plate adhesive
« Reply #24 on: April 19, 2021, 01:57:14 PM »

I’ve just bought a tin of Evo-Stik solvent free contact adhesive, cos the Bostik solvent free stuff doesn’t seem to be available in the UK at the moment. Personally I like the solvent free stuff cos it’s not as

Oooh, I hadn't seen that for a while so had assumed Evostik had stopped making their solvent-free contact as well. Must buy some more!
Logged
Andy, from the now ex-County Palatine of Cheshire

Caring for a European community of melodeons from France, Italy, Germany, Wales and Suffolk!
Pages: 1 [2]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal