Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Odd Noise  (Read 801 times)

0 Members and 1 Guest are viewing this topic.

Vallenato831

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 201
Odd Noise
« on: April 21, 2021, 12:49:39 AM »

I'm trying to diagnose this "boing" sound on this button.  At first I thought it was a weak or damaged spring.  But doesnt show any other signs of a bad spring. 

Thoughts?
« Last Edit: April 21, 2021, 02:22:01 PM by Vallenato831 »
Logged
Corona III x8

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: Odd Noise
« Reply #1 on: April 21, 2021, 01:04:12 AM »

I think it is just the vibrations set up by the pallet hitting the fondo on the return stroke. It sounds as if the strong impact is reverberating through the 'L'-shaped lever arm and the mechanism in general. You could try opening up the keyboard (is there a removable back-plate?) to see if any part of that particular lever arm is contacting any other part of the mechanism or underside of the keyboard cover. Adjust by gentle bending if necessary. Also remove the grille to similarly check for any unwanted contact near the mechanism pivot. Otherwise I don't think there is much you can do about it.
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

Vallenato831

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 201
Re: Odd Noise
« Reply #2 on: April 21, 2021, 01:08:17 AM »

I think it is just the vibrations set up by the pallet hitting the fondo on the return stroke. It sounds as if the strong impact is reverberating through the 'L'-shaped lever arm and the mechanism in general. You could try opening up the keyboard (is there a removable back-plate?) to see if any part of that particular lever arm is contacting any other part of the mechanism or underside of the keyboard cover. Adjust by gentle bending if necessary. Also remove the grille to similarly check for any unwanted contact near the mechanism pivot. Otherwise I don't think there is much you can do about it.

I think it's the lever vibrating off that wooden piece.  Might have to put some felt inbetween? 
Logged
Corona III x8

Gonk

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 507
  • (Mudlark Music)
    • Mudlark Music
Re: Odd Noise
« Reply #3 on: April 21, 2021, 03:14:23 AM »

My first thought was that it was the key arm bouncing against the underside of the fingerboard top.  Does it happen with the fingerboard top off? 

The felt might push the key out of alignment with relation to the fingerboard top.  I agree that it's worth holding a piece in there just to see if it stops the sound, and then perhaps find another, thinner material?  You can also use two pairs of pliers and carefully change the curvature points in the key arm so as to keep the key aligned with the hole, but move the offending part of the arm to the left.
Logged
Mudlark Music - restoration, repairs, lessons, and sales.  (USA)  http://mudlark-music.com

folkloristmark

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 582
    • street entertainers
Re: Odd Noise
« Reply #4 on: April 21, 2021, 07:48:27 AM »

That gives a little suport to the key board cover . Pull it out see  ifthe noise stops thin it and replace . It can go any where around there it fits. Doesnt have to be exactly there if there is a problem . Doesnt have to be that shape.Get inventive.
Logged
Mark Taylor
Folkloristmark

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: Odd Noise
« Reply #5 on: April 21, 2021, 08:09:45 AM »

That gives a little support to the key board cover . Pull it out see  if the noise stops thin it and replace . It can go any where around there it fits. Doesn't have to be exactly there if there is a problem . Doesn't have to be that shape.Get inventive.
Or just shave a little off the support so it no longer interferes.

diatonix

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 622
Re: Odd Noise
« Reply #6 on: April 21, 2021, 08:10:58 AM »

Something (possibly the top plate) may be hitting the grille. Try without it (without the grille, I mean).
« Last Edit: April 21, 2021, 08:14:14 AM by diatonix »
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Odd Noise
« Reply #7 on: April 21, 2021, 08:30:55 AM »

Yes,  something metallic is making contact when it shouldn’t be.  Could be any part of the lever/pallet hitting anything close.  And the late boing is something slightly loose and vibrating.  You need to do some detective work to identify the source of the noise, and only then do a fix. 
Things I’ve seen on Hohner action causing extra noise:
If the lever arm is out of line the pallet might hit the next pallet.
The pallet can oft too high so it hits one of the other levers
The pallet or l vet can hit the grill
The button can hit the edge of the hole in the keyboard.

Take off the grill and the keyboard top.  Does the noise continue?

It’s something mechanical (you should have worked that out already!) and with careful observation you can learn why.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Vallenato831

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 201
Re: Odd Noise
« Reply #8 on: April 21, 2021, 01:45:15 PM »

I've confirmed it is indeed the lever hitting against that wood piece.  The sound happens when the keyboard top and grill are off.   What I've done is stickied some felt on the wood piece and no more "boing" sound.  The lever slides over it just fine.  This is probably temporary.  Will redo with slightly thinner felt if need be.  The alignment seems to be just fine, but will keep a close eye on it.   Thanks all!!!
Logged
Corona III x8
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal